The site I'm making uses a tabbed navigation and MooTools to fade the pages in and out. One of the pages has a Flash player embedded on it, and all of the others consist of pure HTML. The problem occurs on the HTML pages -- somehow the Flash player is causing the HTML pages to display oddly. Vertical borders and text will be jagged in the same locations of the top and bottom of the player.!
View 3 RepliesWhich is the best way to present an swf file from html?Is it better to embed the swf file directly into the html page, or is it better to <a href= > it from the html file?
View 9 RepliesI have a flash (.swf) movie on the homepage of a website which runs automatically after been downloaded to browser. However this is creates problems since the swf soon crashes(with message :The Adobe Flash plugin has crashed) and gives error messages like "A script is becoming unresponsive...." Since rest of my site is pure html and js but flash content makes the site very sucking and I want to replace it with a simple better alternate. What options exist for me to replace flash content?
View 2 RepliesI'm using flash in a few of my websites for displaying a slideshow. This is the code I use in splendor-bg.com :
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,0,0" width="740" height="450" id="tech" align="middle">
<param name="allowScriptAccess" value="sameDomain" />
[Code]....
I can see it on my computer in internet explorer just fine (I must have installed something that is needed, or set up IE in some way, I guess).. but its not working on quite a few other computers I've tested it on - this is what they see:
Either a message of something that needs to be installed should be shown to the user, or something in the code itself..
I have a big flash application and I want to display a HTML page inside. (it needs to work in IE 6/7/8, FF 3.x). I've tried setting wmode to opaque or transparent. This does not work, flash has a bug with textfields. And there are lots of other bugs, for example: [URL]. Is it possible with some tricky IFrames?
View 6 RepliesI just downloaded the latest version of google chrome and my html page with flash inside is not appearing in chrome.I am using an authoring tool called outstart trainer. The pages work well in IE and Firefox but does not work in google chrome.
View 1 RepliesI'm trying to retrieve values that are embedded in the object tag on the HTML page. Is this possible? I've been trying to find how to do this, but all hits point out to how to embed flash in HTML and rarely do I find on which tells me how to retrieve data from HTML into flash.
Example:
Code:
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Untitled Document</title>
[Code].....
How can I simply trace the value in flash??? Just for now, all I want to know is if I make a dynamic text box in flash, can it display the name of the .swf by reading the param?
I am displaying dynamic content in my flash. Dynamic data is coming from XML and in flash file, html entities are not showing right, strange characters are displaying there. Here is link, [URL] See featured work description at the bottom of the link above, if there is no special characters in description then refresh the page. You will see special character in description (like question mark and sometimes square box, etc.)
View 1 RepliesI have a windows server box 2008 R2 with Adobe Flash Media Server installed on it version 4.5. I have installed Flash Media Server and input the serial and all that fun stuff. All ports have been forwarded properly, Once the server is up and running I go to the admin console just to make sure all is running well. Once up and running I turn to my Media Encoder and enter my FMS URL as well as the stream, (livestream?adbe-live-event=liveevent). I select my input device and it connects and says streaming to primary. Now Yesterday I did this and it was streaming correctly i check with my ipad and the livepkgr was working, I have live video on my ipad. I then went to my website to check and make sure all was working on there and sure enough my live event was being streamed to there was well! Sweet right? No wrong....The server was shut down after this test trial assuming everything was working.
When I turned it on today the flash media encoder still connected and streamed right and when i check the ADMIN console it appears to be working and connected the right way, but my problem is when i go to my website i just get a black screen with nothing playing on it, and on my ipad for some reason I get the last 30 seconds of a piece of the live clip we where streaming last night and then it stops.......I have nooooo clue what is wrong and it is driving me up the wall. My hope is to be able to stream from my mac to my Media Server and then be able to embed it into my website as well as have it playable on ipad/Android (havent worked on android part yet because of this whole problem).
I have a file full of text; if this were html, I'd just make an iframe and in the frame, I'd have the text page with "back to top" links throughout. But since this is flash, I'm loading an external text file, and I'd like some "back to the top" links within it. I know how to do a "back to the top" in html, but it doesn't seem to work in a loaded text file in flash. Or is there a better way to present a lot of information in flash?
View 7 RepliesI have a flash file that works fine in CS3, but once its exported one of the movieclips is not displaying in html.Detail on the movieclip:It uses 'attachMovieclip' method to load multiple instances of the same movieclip symbol from library. The first instance is put inside the container, the rest is hidden by a _x offset value
View 2 RepliesI have several swf's and I can embed them within html without problem. However, one swf is causing me problems. This swf has an animation on the stage as a preloader. The rest of the swf is then completely run through an external as3 class. The as3 class loads an xml file and prepares the images. When its complete, it removes the loader removeChild(preloader); (the original animation which was displaying). If I run the swf on my computer, everything works great. As soon as I embed it, all that happens is the preloader animation constantly plays, and it never gets to the point to display the images. Is there something I need to do when I embed this swf into html to get it to work properly?
View 8 RepliesI'm loading text into a text field from an XML file. I'm creating a very simple CMS for someone's website and, if they put in a link I want it to show up on the site. I remember, years ago, being able to simply display XML as HTML, so when inserting.
HTML Code:
<a href="#">A Link</a>
into mytextfield.text, an html-esque link would actually show up in the .swf. Of course now I can't find it anywhere.
what would be a good solution to the following scenario: a page is supposed to have a few flash buttons in it. we want to check if the user's browser supports flash (a given version i suppose) and if not - display gifs or jpgs instead.
View 1 RepliesHow would one go about diplaying text from the html file within which the swf movie is embedded?
Basically i have a rotating banner on a page (jquery isn't right for this one) and wish to have the text messages within the diferent slides of the animation load from the html page.
this is a requirement from upstairs for SEO reasons.
I have a window on my Flash stage that has some scrollable copy in it. The problem is, I can't seem to have any formatting for the text ... if I select a word or two to make bold, it all turns bold. I gather I need to use the "Display Text as HTML" checkbox and then paste in some HTML formatted text but this doesn't seem to work. I searched this forum and found that others were designating "htmlText" in Actionscript instead of just "text" ... that didn't work either. I probably just did it wrong, or maybe it's becuase I'm using the UI component "UIscrollBar" for it's scrolling of the text.
Is there anything else I need to do to be able to format some text with strong tags and maybe some href links?
I have my properties inspector with the following check marks:
Display as HTML
Multiline
Dynamic Text
selectable
I'm getting nothing with this:
mainAns.htmlText = '<TEXTFORMAT LEADING="2"><P ALIGN="LEFT"><FONT FACE="Verdana" SIZE="10" COLOR="#0B333C" LETTERSPACING="0" KERNING="0">The differen <B>is</B></FONT></P></TEXTFORMAT>';
Maybe it has something to do with the quotes? the text will be retrieved from a database.I dont see what I am doing wrong
I think it's the way I calculate the number of lines in the string... How would I calculate the amount of lines using rich text?
I'm trying to display htmltext from xml file in my dynamic text field.I used: dynamic_ txt. htmltext=textFromXML;I embedded the fonts Latin 1, Latin Extended A, because I want to display characters like "�", "�", " is space and it displays correctly, but "¡" which is "�" displayes "¡" so that does not work.
View 2 RepliesThe HTML content below the flash content not displaying in IE8 browser. Here is the code:
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,24" width="100%" height="100%">
[code]......
Why do I get this error saying parent does not exist when I try to remove a movieclip. In the first case, the movieclip cannot exist either on screen/memory if it was not 'contained' by either a movieclip or stage. How can this happen, can somebody explain how this "movieclip" loses its parent reference to the stage or container mc. The debugger stack shows the value of movieclip.parent as null.
View 2 RepliesThe issue is loading data from an XML file and having it present in a Flash website. Its a 'book review' thing (i've altered the XML and AS3 for posting here, so the XML looks a little like this:
<books>
<book>
<bookName>The Monster</bookName>
[Code]....
I am trying to display am image within flash using CS3.
I have a text field with the following code.
feedback.htmlText = "<img src='Logo_small.png'</img>"
nothing displays. The image and flash document are at the same level, so that is why I am using a relative link. Do I need to use a full (absolute) link to the image?
This question was posted in response to the following article: [URL]..
View 1 RepliesMy server for some reason displays .AIR file inside the browser, but I want to have it downloaded. How can I do this?
View 3 RepliesI'm having trouble getting a decent system running for playing multiple independent flv movies in a container clip using the flv component back-to-back. I guess what I'm looking for is tips or examples of creating the video equivalent of a slide show - with options to skip next, previous and go to a specific clip.
Basically, at the heart of it, I'm just setting flvcomponent.play(newcontentpath) via actionscript. But that causes a skip of about 0.5s while flash switches gears and begins the next clip.
Does anyone have any tips on achieving good transitions in actionscript2? More generally and tips on dealing with video via actionscript .
I would like to create an AJAX style pop up to present photos from a flash movie. I found a tutorial, but it didn't work for me. I'm trying to trigger it off the gerURL function of a button, but nothing popups. I have verified that a simple link in <a> from the html page the flash movie is on works fine, so it's just the call from flash itself.
View 4 Repliesis there a way of making flash test if a jpeg is present when trying to load it externaly?
View 3 Repliesi'm working on a game project and i got some trouble with displaying stuff in the game Launcher. everything is in AS3. I'm actually looking to achieve almost the same results as the World of Warcraft launcher with a news section. the way i think to work it is that i create either a textArea component or a textfield and display html page in it. This html page could contain text, image and flash SWF.
but here's the problem, textField and textArea component are very limited in displaying and formating HTML pages. So i don't know if i should continue to search and try developping this way or find another way for displaying dynamic stuff that can be easily updated.
There is a library component represented by Class A. But constructor of this class requires some parameters. When the component needs to be added dynamically, it's fine because of code :
var abc:A = new A(param1,param2)
But what if my movieclip is already present on the stage. I notice it gives out error, that the parameters are null.
Is their any way to insert constructor parameters for movieclips already on stage.
I'm having an issue with the PDF displaying outside the viewable area of the mx:HTML control in Flex. When the application starts up - the mx:HTML is set to a certain size, but can be enlarged if the application is maximized. These are the following conditions to replicate it: Issue only happens in Windows (Windows 7, not on Mac) Issue only happens with Reader X installed (not with previous versions) Issue only happens when running the built app, does not happen in debug / development mode from FlashBuilder
[Code]...