When I open my actions window, it is automatically sized too far lengthwise. With this being said, I cannot read the last 10-15 lines of my coding. I cannot reach the corner resizing tab since it is at the bottom of the window (window resizing does not work on the top corners) which extends past the bottom of my screen. Does anybody know how I can fix it so that I can resize this window to fit on my screen properly?
View 1 RepliesI have some floating window that opens above my page. The problem is that I don't want buttons above to be trigerable. I tried to put an movieclip on bottom layer of floating window and tell him not to show hand cursor, but it looks as if my floating window is transparent. I could still push buttons below and cursor would change into hand. [URL] go to button "ostalo" and click any of galleries. Then go over reed floating window and you'll notice that you can push buttons underneath.
View 1 RepliesI'm using flash 8, I'm tired of having one monitor share the timeline, stage, actions and properties window. I'd like to detach my actions window and place it on my other monitor. Is this possible?
View 2 RepliesWhen I try to open the actions window via F9 (yes on a timeframe with existing code), the timeline colapses, but no actions window. I have to double click on the header of the timeline at the very bottom of the screen to bring it back. When I try F9 again (or even Window-Actions from the top menu), the timeline vanishes again, but no actions window comes up.
View 2 RepliesWhen I'm coding action script in the Actions window of Flash, in line breaks, the paragraph symbol is present, and there are dots in all the spaces, etc., etc.
I accidentally turned this on, and don't know how to turn it off.
It's like the paragraph symbol button in Microsoft Word.
I know this might be a dumb question.. I somehow switched on paragraph signs () in the actions-window and they appear after every line break. I can't figure out how to make them disappear again.
View 1 Repliesthe button doesn't open the borderless window.in the button actions, i write this :
on (release)
{
getURL("javascript:openIT('index.html',550,400,nul l,null,'mywinname01');");
[code].....
Is there a way to assign actions to a instance before its on screen. Like to give you an example I have a box symbol instance named "box_mc" and I would like to place the actions on the first frame of the movie and have the box show up on on like the third frame of the movie. This is all done with AS3 by the way.
PHP Code:
box_mc.alpha = 0.50;
The action script is really just to visually know that the box is getting the info passed along to it. But I keep getting this error message when I publish my movie:
Quote:
TypeError: Error #1009: Cannot access a property or method of a null object reference.at remote_as_fla::MainTimeline/frame1()
Now as error messages go that one is pretty straight forward. Looking for box_mc and I can't find it.
Now the simple answer it if you want the box to show up on frame 3 then place the actionscript on frame 3 and it will work.
But this isn't really about getting the box at 50% alpha its more about know how to assign actions to elements that aren't on the screen yet.
Is there a way to do that like place all your actions on frame one and then assign them remotely to the instances thought out the movie from there?
When I open the Actions window, the bottom is off screen so I can't re-size it. how to get the whole window on the screen?
View 2 RepliesI have created a button in Flash CS3, made an instance of the button on the stage, and trying to put some action to it (using ActionScript 1.0 & 2.0). I click on my instance, open the "actions" window but I cannot get the "actions-button" window to add the script. i only get the "actions-frame" window that will not work for my button to link to another page.
View 3 RepliesWhen I open Flash CS3 to create something,if the Flash window is not maximized, it disappears off the right side of the screen(s).If I maximize the window using the task bar, it's fine,but it covers up the other resources I need to use. I'm using Vista Business and Flash CS3 with two screens, the extended one on the right.
Right-click the Flash button on the taskbar and select Move.What happened: When I use the arrow keys, nothing appears to happen.When I move the mouse, the arrow pointer comes in from the extreme right side of the screen.When I hold the mouse button down and drag, a four-headed arrow appears at the extreme right, but the Flash window does not appear .Reboot. What happened: Flash is still off the screen unless maximized.
What happened: I found a registry hack that I tried (next item) but it didn't work.Use Regedit to modify settings (after exiting Flash): HKEY_CURRENT_USER > Software > Adobe > Flash 9 > Settings > WindowThe current value is 12639 960 13919 1872.I assume these are X and Y for upper right position and pixel length and width, but I don't know in what order.I tried a couple of values, including 0 0 0 0 and 100 100 100 100.I tried rebooting, verifying that the Window values were the same as those I had set, and ran Flash. What happened: Flash is still off the screen unless maximized. Registry values return to being huge numbers.Repair or uninstall+reinstall Flash Using Control Panel > Programs > Uninstall a program. What happened:Although several Adobe products are listed, Flash CS3 is not listed, nor are any of the other CS3 suite.Using Start > All Programs > Adobe > Uninstall. The Adobe group doesn't have an Unistall or Install program, not can I find one in C:Program FilesAdobe*What I'm using:
Dell Precision M90 with 4 Gb RAMNvidia Quadro FX 1500M, ForceWare version 156.69 with 256 Mb VRAM + 1406 Mb shared RAM available at the momentVista Business with auto-updatesAt home I use an auxiliary 1280x1024 monitor; at work I use an auximiary 1680x1050 monitor; the problem occurred when I moved from home to work.
Is there a way to take screenshot of the client's window using flex?
I found an example which uses java bridge, but i am looking for different solution.
I have an AIR application. It should be moved around the screen with the mouse. In order to achieve this I use the event: this.stage.addEventListener(MouseEvent.MOUSE_DOWN, onMouseDown, true,-2);
It should be activated with the lowest priority compared to inserted elements for example those that should be scrolled, clicked, etc. I tried the solution shown below with the event priority set to -1 because there might happen 2 different events and my moving application event should be the last one to be serviced or shouldn't be serviced at all.
[Code]...
I know how to open a window with Flash so thats it's fullscreen with no browser.
ActionScript Code:
on (release) {
toggleFullScreen();
[code].....
how would i do a full screen pop-up window through flash 8 for an entrance screen such as [URL].
View 3 RepliesJust starting my first project using AS3 and using SWFObject to embed in HTML to get a full 100% width/height flash (photography site so needs to fill entire window, especially with widescreen).Is using SWFObject the best way, and what do you think the best width/height stage dimensions are?
View 4 RepliesI would like to launch a web site in a popup window wich adapt his size to the screen resolution of the visitor (fullscreen) what is the code that I have to place on the "launch" button ?
View 1 RepliesI want to make my SWF be on the very top of the page, but beneath the header. The SWF automatically adjusts its size based on the browser's; I want it to take up as much room as possible at all times while still being able to see everything, which I have.
The problem is 2 things: one, I have something flying in and out (from the top) and you can see it in the white-space around the SWF when it is not in on the stage. Two, the whole vertical alignment thing. I want it to be DIRECTLY under the header, not centered.
I'm using Dreamweaver to make this webpage by the way.... I'm not really sure which end this is- Dreamweaver or Flash...
where abouth can i donwload a trial version of macromedia flash 5.0 and is there any stuff on making a flash clip come out of the flash screen or window
View 1 RepliesUsing Adobe Flash CS3 on a sometimes dual monitor setup. After attaching back to my docking station, and starting up Flash CS3, the window is off the edge of the right hand monitor somewhere, and I am not sure where. The mouse cursor makes it look like the window is somewhere off the lower right hand corner of the screen somewhere, but even after holding in the left and up arrows for a long time, there is no motion, and the window never appears. I can maximize the program back to my primary monitor, but this is hardly an ideal solution.
I have found the following registry entry, but am unsure if it applies to what I'm having problems with or what the format of the entry is: HKEY_CURRENT_USERAdobeFlash 9SettingsWindow
I make advance data grid to view tabulate data. Each row has icon. When user click that icon show extra data for the that row. I want show popup in my page center. I used PopUpManager.centerPopUp(panel); to do it. This is my code sample.
[Code]....
Now pop up show in center of hole page but not screen. When data grid have more data popup window is hide. I want show it center of screen. How can i do it. Can i set popup position manually?
Monitors are different sizes so does a flash player change to fit
i changed this as i have no replies is this not this would be common process to change, the size of the screen to fit different size browsers.
I want to launch full-screen pop-ups for the large photos within a Flash gallery.The gallery (above) is a visually customised version of the AS2 Image Scroller Gallery purchased from Flashtuning.net.I have done some research and located a JavaScript full-screen pop-up tutorial hosted by ActionScript.org, but as the image is embedded within a SWF and not an HTML page, I'm assuming that it won't work.The JPG URLs for the Flash gallery are obtained from a supporting XML file, but I'm assuming that integrating the full-screen pop-up JavaScript within the XML won't work.
View 7 RepliesTrying to make a popup message window come up on the screen with like a simple message in it and then an ok button to close the popup.I need this box to be on top of everything else.. but when I do it all the buttons and whatnot on the mainpage show through my msgbox..How can I make a simple msg window appear ontop of everything else?
View 3 RepliesI've done some research but all I can find is help on how to fill the browser window.
how to resize the browser window to fill the full screen - that works in both Mac and PC?
I want to have an opening page in HTML and a button to open the .swf in full screen mode, centering the movie.
I have a problem with the following actionsctipt. what this actionscript does is to position the "mc_content" in the middle of page all the time, even the user trying to resize the window. but my problem is when you open the window "mc_content" is not align in the middle, but after you resize the browser it will adjust in the middle of the page.
[Code]...
I've done some research but all I can find is help on how to fill the browser window.Does anyone know how to resize the browser window to fill the full screen - that works in both Mac and PC?I want to have an opening page in HTML and a button to open the .swf in full screen mode, centering the movie.
View 2 RepliesIs it possible to disable buttons in a movie clip that is on the root level so that a movie loaded on top of it into level1 doesn't have any hot spots? My file is a map that starts as a movieclip with buttons in level0. There is another movieclip/button that when clicked loads a detail map on top into level1. I would like to have some new buttons in the level1 movie clip but the buttons in level0 are still active and it's confusing to the user. As a workaround, I've created an invisible button covering the entire detail map that doesn't do anything other than change the cursor to the pointing finger.
View 5 RepliesI have some text in textbox and i want to get the letter beneath the mouse cursor while the user move it over the text. how can i do that ?
View 2 RepliesI'm guessing the answer to my question is no, and the solution lies in the hitTest method. But just to be sure . . . if I create a new movie clip and then drag that movie clip over other movie clips that have MOUSE_OVER listeners is there anyway that those clips will get the mouse over?
View 3 Replies