IDE :: Converting X - Y Values - Create An Animation That Automatically Draws A Line Onto The Movie Clip Which Ends Up Being Curved
Jan 12, 2009
I'm trying to simulate the coriolis effect and have managed to create a drawing application that lets the user draw on a rotating movie clip. However, I would like to now create an animation that automatically draws a line onto the movie clip which ends up being curved, but I can't figure out how to convert the x, y coordinates of the pixels on the stage to the corresponding x, y values of the movie clip. Here's what I have so far:
[Code]...
View 1 Replies
Similar Posts:
Feb 28, 2009
I'm having an issue with Flash CS4. I'm not sure what I toggled, but when I draw a line or shape it automatically converts it into a symbol. How do I disable this? It's very annoying to have to break apart each line as I draw it.
View 1 Replies
Jun 22, 2003
how I can create a movie that draws a shape on screen.
I understand how to draw a line, etc but can not work out how to see the shape build. I do not want something likes Kirupas' drawing demo as I do not want the viewer to create the shape.
For example I want to see the lines being drawn and control the speed, rather than the shape simply appearing in the movie.
I realise I need to change the lineTo value
An example is the way the TV is drawn in [URL] although I am not sure if this uses actionscript or is something else.
View 2 Replies
Feb 2, 2008
i have a movie clip that rotate with up and down keys. the player walks on the ground, there are walls. now, i want to create, (with actionscript 2) a line that goes from the movie clip, that goes in the direction the movieclip is facing and that stops when it touches the ground or a wall.
View 2 Replies
Jan 27, 2009
I was just getting used to AS2 and this is the first time using AS3 so I'm having a little difficulty getting used to it, so please bear with me if I'm missing something really obvious.I have one frame one the main timeline with two movie clips, the first called 'logo' (contains an embeded .flv) and the second 'back' (contains two frames, one blank with a stop command; the second a static image with a stop command). What I want to do is have the movieclip 'back' advance to frame 2 once the movie clip 'logo' has finished playing. I have included my code below:
Code: Select all
stop();
[code]....
View 2 Replies
Jan 15, 2011
I'm trying to make an Etch-a-Sketch kind of game for fun. I think it's a simple problem, but I tend to type a lot of stuff for some reason. I found this code to build upon:
ACTIONSCRIPT Code:
createEmptyMovieClip("Line",1);Line.lineStyle(1,0x000000,100);onMouseDown = function (){ Line.moveTo(_xmouse, _ymouse); onMouseMove = function () {
[code].....
View 1 Replies
May 24, 2010
I'm trying to get a movie clip to automatically load up another external clip, after playing an embedded flv.
This is what I've tried so far:
var holdFrame = setInterval( holdFrame, 5000);
gotoAndPlay(
_root.mc_holder.loadMovie("swf/library.swf"));
clearInterval (holdFrame);
Although it throws no errors, the setInterval is ignored and it just loads direct into the next mc clip.
View 9 Replies
May 15, 2009
How can a create an animation of line drawing itself.
View 1 Replies
May 15, 2009
How can i create an animation of a line drawing itself.
View 1 Replies
Jul 16, 2009
I'm trying to draw this hint box and was wondering if anyone could explain to me how to draw a curved line like the one below in flash?
View 4 Replies
Jan 10, 2011
I want to 9 scale the line in the shape of 'U' so that i can increase the width in a manner that the rounded corner of the line not got spoiled and I also want to resize (in proportion) it without spoiling it's rounded corner. Right now I have done it in the distinct files but I want to do these both properties in a single file.
View 1 Replies
Dec 12, 2009
Any idea on how to curve a line and bend the texture along with it?I tried lineBitmapStyle with curveTo, but that doesn't bend the texture.I was thinking of using a for loop to draw the curve using lineTo, and using a matrix to rotate the lineBitmapStyle...but it isn't working out to well.
View 0 Replies
Dec 24, 2004
I need to attach a series of mcs to a curved line. These mcs are attached through actionscript with the attachmovie code, they do not tween, just attach at intervals one after another. Its hard to explain i know. When the user presses a button on the screen the first mc appears at the start of the curve, another press attaches another mc perhaps 10px inwards on the line and so on.
View 2 Replies
Jul 2, 2011
im working a on little video project and i have a video that plays (obviously). What i would like to know if there was some way to make the video replay after it ends automaticly. i havent worked with video in flash before so im not sure what to do.
View 1 Replies
Nov 8, 2010
I was working on this Graph (see link) and i couldn't find a way to get a nice curved line between the dataPoints.URL...
View 4 Replies
Dec 2, 2007
Any way to get a curved line to draw from a known point a to a known point b. Point b will always be changing and will be in any position around point a. I can work with an existing line from a movieclip and change it somehow, but right now I can't find any way to accomplish it.
View 2 Replies
Jun 3, 2008
I want to be able to position a series of movieClips along a curve of a cicrcle, well part of it. Basically I need a curved wall.
This is where I am at the moment, ...not very close.
_root.rot = -30
for (var i:Number = 1; i < 6; i++) {
var block = attachMovie("block", "block_" + i, _root.getNextHighestDepth())
block._y = 30
[Code]....
View 4 Replies
Aug 21, 2009
Here's the effort simply displayed: http:[url].....it uses curveto to show the arc of a doorswing.I'd like the drawn arc instead to appear/trail along the leading edge of the door _as_ the door swings open. Guide Layers AS2 led me to tweening AS3 class but the beginning and end objects weren't right. Am I in the wrong place? This seemed somewhat straightforward but perhaps I'm searching for the wrong keyword(s.
View 4 Replies
May 1, 2011
I created a character that can move left or right according to keys pressed by the user. (simple enough)But the most I could do is make it move along a straight line, (change X value)or along inclined lines by defining them as linear functions. (not very effective i guess)My question is, is there a way for me to draw a line and have my character walk across it?Is there something that would allow me to get the Y value of a curved line I drew based on its X value?Obviously this wouldn't be a problem if I could just draw a line from a mathematical equation, but my searches proved that to be rather complicated.
View 2 Replies
May 10, 2011
I am trying to draw a continuous curved line in flash. There are many methods but none of the ones I have found so far quite fit my requirements. First of all, I want to use the flash graphic api's curveTo() method. I DO NOT want to simulate a curve with hundreds of calls to lineTo() per curved line segment. It is my experience and understanding that line segments are processor heavy. Flash's quadratic bezier curve should take less CPU power. [code]...
View 3 Replies
Jan 11, 2010
Im making a scrollable mc. Easiest thing in the world.... but the damn scoller just will not stop when the movie clip it's scrolling ends. It stops....eventully... but not close enough. What actionscript do I need to use and where do I put it?
View 1 Replies
Jun 8, 2002
i've tried placing the code in the actions pnel of the mc; on the mc at the main time line and in various other unspeakable places... but i always get the same error warning me that this code can only be used in movieclip instances and that my stupidity levels are reaching dangerous levels. (error: 'Symbol=stage_mc, Layer=actions, Frame=1: Line 5: Clip events are permitted only for movie clip instances
onClipEvent(enterFrame){'
i fear somebody will reply to this with:'the code goes on the movieclip instance'...at which point i will take up a career in knitting (i knew i shouldn't have given up the course in the first place)
View 12 Replies
May 26, 2009
Building a dynamic map that displays State Senate districts for a US State. Each district is a movie clip that I want to manipulate from a ColorTransform perspective on the flash map. The data that drives the map is being pulled from a php/mysql script. I have built out the actionscript up to the point of being able to trace the name and desired highlight color of the Senate district passed from the php (the passed name corresponds to the movie clip instance name of the district on the flash map). The traces work fine as far as the values of the data passed, one field is the district and the other is the color for the transform. The .as file compiles on the test, but will not treat the variable name used for the passed district as anything other than a String. I get an Error #1069: Property transform not found on String... Have gone through adobe reference pages and have tried every method of type conversion I could find to no avail. I get coerce errors on most attempts to force the String to be an Object.
[Code]...
View 6 Replies
Apr 25, 2005
Im working on some actionscript drawing, right now Im drawing a curved line on a map to show a route for a shipping company, the line is red but I would like to color a portion of the line green for the completed portion of the journey.
View 10 Replies
Aug 8, 2010
I have been trying to create a die that acts as a 60 second timer in Flash CS4 using Actionscript 3.0. This involves creating a die and a dynamic textbox that counts from 60 to 0. Both of these parts of the project are fine, however I need to animate the textbox in 3D space to coincide with the die rolling. I believe it is not possible to animate a textbox (from online reading and also trying to do it myself by playing about with Flash) so I have loaded the textbox into a movieclip. As I'm having issues with this I thought it would be good practice to split the project into sub-projects in order to identify the problem. Here is the actionscript 3.0 I have used for the timer/countdown clock:
var newTime:Loader = new Loader();
newTime.load(new URLRequest("SWFs/timer.swf"));
clock_mc.addChild(newTime); //clock_mc is an instance of movieClipContainer which is a new
[code]........
View 4 Replies
Nov 16, 2009
This has been bugging me for a couple days now and I can't seem to figure it out. I'm passing a string variable as a parameter in a function and want to convert that variable to a movieclip. I thought I had the proper syntax but the trace keeps returning null. I've dumbbed down the function for simplicity's sake.
[Code]...
View 9 Replies
Jul 3, 2009
I'm in the process of teaching myself the components of the CS4 Design Premium package using the Adobe Classroom in a Book series. I'm currently going through the Flash CIAB and i've started using the pen tool. The task involves creating a wave like design across the stage. Whilst this in itself is simple, the final instruction is to click on the first anchor point to close the shape. In the illustration, the closed shape seems to automatically extend around the stage, however when I click on the first anchor point, the line automatically connects between the two points in a straight line.
Am I doing something wrong? The next step is to fill this area, but with the straight line effect that I am getting, this becomes impossible. I should point out that the instruction states that the pen tool line should extend off the stage. I have done this, but even then on clicking on the first anchor point the shape is closed incorrectly.
View 2 Replies
Apr 16, 2010
I press a button and have an object (a movie clip) move onto the stage - that works ok.When that movie clip gets to a certain spot, I want it to stop - that works ok.I want to be able to press the button again and have it leave the stage - that works ok.Then if I press the button again, it will come back on the stage again - that works ok.when it stops on the stage, I want a part of it to animate just once. I've been trying to do this by putting a second movie clip inside of the first, but it won't work.
View 4 Replies
May 9, 2010
I have a movie clip with the name ABOUT, and it contains 92 frames. That I want is when my page open, automatically goes in the movie clip ABOUT and play the frame 47. Here is a code that I am experience to achieve but nothing.
ActionScript Code:
on (release) {
_root.cont.cont2.p2c1.ABOUT.gotoAndPlay(47);
gotoAndPlay(47);
}
View 7 Replies
Aug 16, 2005
i am having trouble with xml. i am trying to work it so that if the variable that comes from the xml file changes to a certain number it will automatically change the movie clip i have on the movie. I have also attached the fla and xml file
View 1 Replies
