IDE :: MC On Rollover A "sense" Area?
Mar 10, 2009
Overview: A white ball_mc is to be dragged and drop to different holes. Each hole is represented by different colors.
Requirements:Before dropping into the hole, the white ball has to be changed to the colour when drag near the colored hole and changed back when drag out.I only managed to make the white ball_mc to drag and drop to differerent holes and returned back to default position when not place at the hole.
However, i got problem making the white ball change color when dragged near the hole. Also the white ball_mc will only change color when clicked and dragged which means it will not change its color when mouseover without dragging the ball.
View 3 Replies
Similar Posts:
Dec 11, 2009
I have created a world map that has each region of the world as a rollover. When you rollover the US, for example, it turns red and a movieclip pops out to display some info...it's basically a graphic I created in Illustrator that is a rectangle with info written on it.
The rollover works fine and everything pops out, but when you move the cursor close to the popout, it thinks you have rolled off the US. When you hit the edge it pops in and out almost like it is blinking.
How can I make it so that they are one hit area? Here is some of the code:
na_mc.buttonMode=true;
setChildIndex(na_mc,0);
na_mc.addEventListener(MouseEvent.ROLL_OVER, onButtonOver);na_mc.addEventListener(MouseEvent.ROLL_OUT, onButtonOut);
[Code]....
View 7 Replies
Oct 9, 2006
I have a background Nav area, that on rolling over, I want to come more clearly into focus. This is done by lightening & changing the colour on rolling over, where the background nav area is actually 2 identical boxes, and only the top one shows and lightens and de-blurs on rolling over.
The problem is, I have buttons (of course!) over this whole thing, and when someone hovers over the button...it makes the original code of the nav background think it no longer is rolled over, and goes to the onRollOut() function. It also seems to be killing my performance, so I might be doing something totally wrong.
What I would like is essentially a focus control - you are over the nav background and it lights up the way I want, but the buttons over it (both the nav and the buttons are on the main timeline - the buttons in a layer above the nav) still work normally and it stays lighted up...here is my code if I am doing something obvious, though I have only made a couple of posts so I will not blame anyone for not having a go at it...Shawn
this is in the nav background movieclip, which has a navUnder mc and a navOver mc included in it:
[code]...
p.s. it's available here, well at least in Josh's image gallery: [URL]
View 1 Replies
Jul 20, 2011
As far as my understanding goes Modules kann be used to split an Application into different parts. A big advantage seems to be to be able to load Module after Application Start, to get a better Startup performance. I personally would like Modules to make me able to have an own Code Sandbox for the Module Code. So neither the Main App Code nor the Module Code should influence each other. But for examples CSS Styles from modules influence the Main Application an visa vers. My Question:
1. What can I use Modules for beside Runtimeloading ?
2. Are there options to run code in an own sandbox ? For Example via Loading swf assets ?
View 2 Replies
Jun 10, 2009
here's my code (I'll explain in a second):
[Code]....
Code: - CA:true - TC:0 - CA:true - 1 - TC:1There's no logic in that! The output proves that both parts of the array are true. And yet, the "if" statement only activates once!
View 8 Replies
Nov 19, 2009
Flex appears to have 2 video classes: Video and VideoDisplay. My question is when does it make sense to use one or the other?
What I can tell from initial glancing is that VideoDisplay responds to mouse events because it inherits from IntaractiveObject, but I'm not sure if it's a real difference, because Video seems to have a workaround for this in that you can add your own event listeners.
There's probably more to it, but this is the only difference I can see now. So my question for those who used these objects extensively, can you share your experience when you use one over the other.
View 1 Replies
Oct 19, 2010
I'm looking for a way to make a simplified version of the HTC Sense Homescreen slider. I had something like this in mind: [code]I basically need to make 8 homescreens. Each homescreen is an interaktive movieclip. Nothing fancy is going to happen inside those movieclips.No navigation buttons, just a plain and simple drag and slide with movieclips.I have a bit knowledge using greensock tweens also - so if you got a solution with this please share your knowledge.
View 1 Replies
Oct 7, 2009
I'm still trying to get my head around the best way to structure event flows. Someone made a lot of sense by telling me that contained objects should be decoupled from their parent containers so they're reusable between containers. Instead of calling their parent's function, they dispatch an event. Sensible! I recently myself in the awkward-feeling situation of dispatching an event on a contained object, from its parent. It seems more intuitive for an object to be the one dispatching its own events. Maybe I'm bordering on breaking the Law of Demeter? Example of what I'm doing: child.dispatchEvent(new ChildEvent(ChildEvent.IM_BEING_A_CHILD)); Am I correct in feeling strange here, or is it a normal thing for one object to dispatch another object's events?
View 1 Replies
Oct 21, 2010
I've got several custom classes. Let's call them "Character", which is supposed to import and use "Head". Then "Head" imports and uses "Hat". That works just fine...
[Code]....
This runs without a hitch. Simple as pie... But if I try to create a new instance of "Hat" or even define the Hat variable in "Character", it gives me the compile time error: 1046: Type was not found or was not a compile-time constant: Hat. If I try to define "Hat" class and create a new instance of "Hat" in my main script, or in "Hat" it works like a charm... If I try to do it in my "Character" it gives me this godforsaken error. I've checked my imports, they're all the same!! Why in the world is it doing this?!
View 3 Replies
Sep 5, 2010
My problem is that I listen for a mouse down event and when that occurs I add a new instance of a certain object to the stage, pushing it also to an array:
[Code]...
var minDist:Number = particleA.width / 3 + particleB.width / 3; When I trace the both elements, it says that the particleB is null, what is correct, because If I remove the snippet responsible for creating those, no error pops out. why it's null?
View 1 Replies
May 8, 2007
Code:
function showBigScreen()
{
[code].....
View 6 Replies
May 31, 2009
I have a Flash CS4 document and I am attempting to resize the stage to accomodate its current contents.When I do so, the stage becomes *much larger* than the apparent contents, and I am trying to figure out why. I have literally examined every frame of the animation, and selected every individual object to see if the selection bounds indicate a rogue "large object"...but none indicate this...what sort of things about the contents might cause this that I am missing?
View 7 Replies
Dec 7, 2009
MIX-ActionScript is my FLASH scripting language developed to confuse a small tool that can be function names, object names, variable names, class names and there is virtually no sense to change the strings, and at the same time very similar to the same time, this confusion is irreversible .Confusion after the code will bring some resistance to anti-compiled for your application security to provide protection.MIX-AS functional and ActionScript Obfuscator similar, unfortunately, this tool has not been updated.[URL]..
View 5 Replies
Jun 28, 2009
In my application the browser window connect with long polling(comet) with the server. If the user open several browser tabs, only one of them(called the master) communicate with the server and serves as a proxy for the other tabs. I want to use flash localConnection to exchange data between the tabs. What happens when a user closes the master tab that holds the comet session? I can use javascript with the unload event to inform the other tabs that the master tab is closing and then close the localConnection but the unload event is unreliable. I can use polling to monitor the master tab connection object but it sound dirty.
When the master is closed one of the other tabs need to become the master. How do I make sure only one of them tries to become the master? If a user close the tab without flash being able to close the localConnection, will it cause a memory leak?
View 0 Replies
Jun 28, 2009
In my application the browser window connect with long polling(comet) with the server. If the user open several browser tabs, only one of them(called the master) communicate with the server and serves as a proxy for the other tabs.I want to use flash localConnection to exchange data between the tabs.What happens when a user closes the master tab that holds the comet session? I can use javascript with the unload event to inform the other tabs that the master tab is closing and then close the localConnection but the unload event is unreliable.I can use polling to monitor the master tab connection object but it sound dirty.When the master is closed one of the other tabs need to become the master. How do I make sure only one of them tries to become the master? If a user close the tab without flash being able to close the localConnection, will it cause a memory leak?
View 2 Replies
Feb 3, 2005
My problem that I'm having is I am trying to build a menu consisting 3 buttons, side by side that open and reveal subnavigation buttons on rollover. Then on rollout of the main container button, they close back to where they were. I have built the buttons and everything works great, the only problem is that on rollover of the internal buttons, the main button senses this as a roll out and plays the rollout animation event (closes the button). How can I make the main button not sense the rollovers of the internal buttons and only play the rollout event on rollout of the main button?
View 2 Replies
Jul 28, 2009
i have a drop down menu am working on and each button tab (although they are not button instances !) when clicked opens up the "drop down" section which you can mouse over to choose another specific button etc - if you mouse out of that drop down area then it pulls back up to the original tab state .. what do i change to the code below to decrease the area that you mouse out of to make the drop down area pull back .....at the moment it at least two inches on the screen below and to the right of boundaries of the drop down box before it pulls up - i want to it pull up as the mouse leaves the boundary box .... hope this makes sense .... there is some part of the actionscipt below that controls this but can work out which bit and how to change it !!! (am guessing the x mouse and y mouse bits - but how to change it ???)
[Code]...
View 1 Replies
Aug 5, 2011
I have this function:
public static function cloneDpObj(target:DisplayObject):Bitmap
{
var duplicate:Bitmap;
[code]....
to clone target displayObject (MovieClip or Sprite) and return Bitmap Object.
It can get bitmap from the target object, but it seem don't get all the area of the image.
By give the width and height of target object, but the target object in design was applied by Glow Effect, so my question can we get the all view of bitmapdata from a displayobject?
View 4 Replies
Sep 29, 2011
I have a movie clip named circle_mc(see the image on the link below) and a mask object(movie clip) which determines visible area of the circle. User can change the portion which is visible (extend the red area and make it red+blue, gray area is invisible). I need to find proportion of visible area to invisible area (red+blue/gray) so that I can calculate angle.
View 1 Replies
May 21, 2004
I would like to first add the xml to my flash. Fine I can do this.But I have a number of buttons, where when I click say CW1, i get the information from the XML file with a node of CW1. I have all the xml set up fine.As I have about eight different postcode types.
ST, CW, CH, TF, WV, WS, DE, SK, SY, and each of these may have numbers that follow, i.e ST1, ST2, ST3 and so forth.
So I can only assume that the postal area could be the main nodes, and the numbers inside the child nodes, am I right thus far.o how can i load the area of the xml file into my text area on mouse click, pulling the information relating.
View 11 Replies
May 30, 2004
However I'd need to be able to draw *only* on the board area (a 450 x 350 pixels area) instead on the whole movie... how to "tweak it?" Here's the fla: [URL]
View 8 Replies
Jun 15, 2011
I have Particle animation like this this PHP Code:
[Code]...
But i want that Object moving in limited area or masked area. I add masked area like this PHP Code:
[Code]...
But it still not working. Any advice ?? or correction in my script code?
View 1 Replies
Nov 29, 2009
I'm programming a game for my Advanced Higher Computing class, and am doing a whack a mole style game. I am trying to program for the bit where when you click the moving movie clip, then the score is increased by 1.
if(mousedown){
if(movieClip contains mouseXCoOrd){
if(movieClip contains mouseYCoOrd) {
score ++
}
}
}
View 3 Replies
Nov 10, 2011
I just want to do not allow editing at some area of text area in flex. How it can be done?let suppose text length in text area is 50 characters, i want to allow editing if cursor position is less than 15, and if cursor position in text area is greater than 15 it should not allow user to add more text in text area.If user press any key it should not add any character in text area.[code]
View 1 Replies
Feb 18, 2010
The script for my timer worked for one button but as soon as I set up the other 2 buttons to do the same, I started having a problem where the rollover action would go after the set amount of time was up but then would repeat itself once after the set amount of time was up again. just to clarify, if it needs it, the reason I don't have a rollout attached to these buttons is because I want the menu to stay out until you leave the menu area
so I have an invisible button called menuin_btn which sits to the right of the menu and covers the rest of the stage where the content will be, so you have to rollover that area for the menu to roll back in. The "rollin" in my code brings the movie clip to frame 16 (the end) where I have a gotoAndStop(1); command to get it back to frame 1 so the rollover can be used again. I've attached a zip with my current flash file and swf and here is what my current script looks like on the main scene:
[Code]...
View 3 Replies
Jan 22, 2005
I am making a ball move from left to right and back. but when I rollover twice quickly, it also accepts the second rollover command. I would like it to accept that second rollover only when the first one is finished. I mean, I want the first to be finished before it accepts another rollover.I know it is simple to solve this with a tween using frames instead of as, but I was wondering if someone knows how to adapt the script.
on(rollOver){
ballTween = new mx.transitions.Tween(balMC, "_x", mx.transitions.easing.Regular.easeOut,balMC._x, 44, .5, true);
ballTween.onMotionFinished = function() {
ballTweenterug = new mx.transitions.Tween(balMC, "_x", mx.transitions.easing.Regular.easeOut, 44,11.9, .5, true);
View 2 Replies
Jul 26, 2009
I'm using actionscript 1.0 and 2.0 on flash Pro 8 and keep getting an error when I test the movie. Here is the error:
[Code]...
I've tried to create this rollover navigation...starting over 6 times already. Is there different language / coding for 1.0 and 2.0? I don't understand what I'm doing wrong.
View 1 Replies
Jan 28, 2010
i wnat to show the message "Hi how are u" as a rollover message or a tooltip when i rollover the hyperlink Know More
View 1 Replies
Apr 24, 2009
I have made a movieclip and gave the frame this actionscript:
------------------------------------------------------------
var keyListener:Object = new Object();
keyListener.onKeyDown = function() {[code]........
it moves fine and stuff but i was wondering how can i restrict the area in which the movieclip can actually move ? my flash file is 550px X 400px and i want to make it so that it can only move in 300px X 200px of the file if you understand ?
View 1 Replies
Nov 13, 2009
I'm trying to create a rollover for a movie clip. On rollover, a line underlines the text,and when it rolls out, the underline reverses. This works fine the first time. The next time you rollover, the animation doesn't work. Then when you move the mouse off the button, a line appears under the text and doesn't go away. Here's my code on the invisible button.
on(rollOver){
this.gotoAndPlay("animIn");
}
[code].....
View 6 Replies
