have a new problem, this time the logo, which should always appear at the bottom left corner, is not loaded in my movie (irrespective of the width & height of the movie)...see the attached file (ori.swf is being called in as2 code in fla)
View 1 RepliesHow should vector artwork be drawn in Freehand so that white details sitting over a blue base are still readable when alpha of e.g. 50% is applied in Flash 8 ? In Freehand 9 I created a logo. Logo has an rgb mix blue base rectangle and rgb white drawn shapes on top. I also drew over the text and gave it the rgb blue as a fill with line none. That sits on top of one of the white shapes.
[Code]...
I have an animation Logo flash movie which I want to appear after 10 seconds of loading the background image (Panel_mc)?
I am using Actionscript 3 to load the Logo.swf movie. The following is the whole code that I have on my action script page:
stop();import fl.transitions.Tween;import fl.transitions.easing.*;
var PanelTween:Tween = new Tween(Panel_mc, "y", Elastic.easeOut, -400, 20, 5, true);
var l:Loader=new Loader();addChild(l);l.load(new URLRequest("Logo.swf"));l.x = -20;l.y = -20;
l.contentLoaderInfo.addEventListener(Event.INIT, growLoader);
function growLoader(evt:Event):void { l.width = 320; l.height = 185;}
Note: I need it because first the background will animate so no one can pay attention to my Logo. Once the background stops animation, My logo needs to be start (animation)?
I am trying to make a logo appear permanently at the bottom left corner of my flash movie, but it is not displaying at all, can anyone help me with this (see attached file- dewslider_ori is being called by fla's swf[not incl.] ) --Flash CS4 As2.0--
View 4 RepliesI am trying to make a logo appear permanently at the bottom left corner of my flash movie, but it is not displaying at all, this (see attached file- dewslider_ori is being called by fla's swf[not incl.] )
View 1 Replieshave a logo that I would like to break up into elements and turn them into a "flash movie" so that I can split the logo up and have it come back together.
View 1 RepliesI have a 100% flash site that I would like to layer a png logo above. I would like the logo to appear top left of the window at all times, above the flash movie.
I have looked online for hours and found wmode tips, etc but I'm a beginner coder and am unsure of how to piece it all together.
I created the flash index.html page within flash CS3, using publish settings and would like some step by step info or guidance on how to achieve the logo png. layer above the movie.
here is my flash code:
[Code]....
Does anyone know how I can add a logo in the form of a Flash movie to my Wordpress blog ?
View 1 Repliesid like to create a logo for a flash movie using photoshop.the problem is, even if i delete the background layer in ps, there is always a white background with the logo.how can i make the background completely transparent when i load it into a flash mc?
View 3 RepliesI have looped 5 frame movie clip on stage contained of several objects. IN3rd layer I have a button symbol "logo" in frame by frame mc, which reacts on rollovers made in "over" state of a button. Also have separate "about" button link on stage, and I would like "about" when clicked to call the "logo" movie clips animation once, and then to go to next scene.. Flash cs4,AS3.0
View 1 RepliesI'm loading a external swf into a movie everything is fine with that. The only problem is that its loading only a part of it. Does anybody know why? Also, this swf is a mp3 player with streaming. The streaming part works but the playback doesn't.If i start only the mp3 player by itself it's working.here is the fla for the player
View 3 Repliesi am making a site with transitions that loads external .swf files(exactly like the tutorial). after the first part of the transition plays it uses:
[Code]...
So i guess my questions is should i add the load movie code before this code or what. how do i make this apply to loading the actuall external swf files??
I created a Flash movie (header.swf) that did some animation then at the end, loaded another into it using this command: loadMovie ("scrolling3. swf","_root.dropZone");It loads and plays just fine. Then I created another movie (video2.swf), that loads a movie in the same fashion: loadMovie ("tom2.swf","_root.mcTom");By itself, this movie (video2.swf) runs just fine.But now, when I wanted header.swf to load video2.swf it loads it, but the movie clip tom2.swf does not run. It just shows up as a white square in the corner. What am I doing wrong?I have tried many of the examples from threads that I have read hear and cannot get it to work.
View 1 RepliesI was wondering about the flexability of loading movies into a movie clip. Currently, I am well able to load one movie into a movie "loader" clip, but thought maybe there is a way to load additional movie clips into that same "loader" clip, as i am starting to accumulate several different graphics that i need to have be inside movie clips so that i can make them change colors on the same frame when needed.
i shot from the hip and tried this code, but didnt have any luck:
mc_LCD_loader.attachMovie("hilight", "g", 1), ("header", "X", 1); mc_LCD_loader.g._x = 0; mc_LCD_loader.g._y = 1000;
mc_LCD_loader.X._x = 0; mc_LCD_loader.X._y = 1000;
[Code]....
My _root movie is nothing more than a interface with navigation buttons. When someone clicks a button another swf is loaded into an empty movie clip on _root.
My Problem:I understand loaders and use them all the time, however, I still to this day have never gotten a loader to work with loading an external movie into a currently playing movie. (ie: in my _root movie you press the "Searching" button and searching.swf is loaded into _root.contents --> contents is the empty movie clip)So anyways... where does the loader go? The only results I've ever had is as SOON as the loadMovie method is called the movie hangs until the entire movie clip is loaded. Then the loader runs... thus making it totally useless.
I would like to set height after I load an external movie into a movie clip.
For example,
this.body_mc.loadMovie("body_about.swf");
_root._height = this.body_mc._height;
I always get height as 0, because body_mc is an empty movieClip.
how to access the body_about.swf height as soon as loaded the movie into the empty movie clip?
I am loading in a logo into the rest of my application via the following code
loadr = new Loader();
loadr.contentLoaderInfo.addEventListener(Event.INIT, addLogo);
var logoURL:URLRequest = new URLRequest("logo.swf");
loadr.load(logoURL);
It adds the file to a 0,0 x and y positio and I wanted to change that so I tried:
loadr.x=45;
loadr.y=15;
That doesn't seem to do anything though. I also wanted to set the height and width of the swf as it seems to be set to a default and that stretches it out a bit.
I just purchased a flash template and can not seem to find where I place the logo. The template now has a logo in text, but I want to replace it with an image.
View 5 Replieshow can I make a gradient area for the shining effect, like in this logo ?
View 2 RepliesI really am a Flash newbie, and don't use Flash on daily basis but the client for whom i'm working at the moment would like a simmilar logo effect on their site.
View 10 RepliesI have a button ( 3 buttons ) and each button is assigned to Load a movie. When you click one of the buttons, the LoadMovie on Level 1 is good. Now here is my problem, how will I unload the current movie before Loading the next one. I want to UNLOAD the CURRENT MOVIE first before loading another MOVIE.
View 2 RepliesI have a logo stageAligned like this:
logo._x = Stage.width/2;
logo._y = Stage.height/2;
but now I want to move it 30pixels from the TOP of the stage...how can I script this ? I don't see any code for identifying the TOP of the stage...
I'm guessing this would be simple but I just started in flash and have no clue what I'm doing wrong here. I'm trying to add an animated logo effect using a linear gradient to create a glimmer effect, using a motion tween. In order to make it appear the logo glimmered with light every so many seconds.When I add a mask to the glimmer layer but the effect comes out obviously wrong. I read somewhere that in the action script I have to use "cacheAsBitmap" but that does not seem to effect anything.I found an example of the effect I am looking to do in a tutorial pertaining to text effectsI have seen this effect used thousands of times online, but there doesn't appear to be any tutor
View 6 RepliesI wanna import like a logo and a few other images which I want to have a transparent background. I understand save it as a png and click interlaced. But when I import it into the flash as a png the quality of my image is seriously reduced. How to import transparent images into flash as say jpg quality.
View 1 RepliesNew website - imported very good quality logo's but quality on finished site not great
View 9 RepliesThe user uploads an image. After uploading is complete the image is displayed the screen. The user can select a particular pixel on the image. Accordingly the image should be removed of that color and made transparent. 1. i tried the getpixel and setpixel32 the image still is very blurr. 2. i also tried threshold its also of the same result - not able to see how to make the output of the image more crisp.
View 1 Replies1. In mysql db, I created a field called "logo" and made it a 'blob'. Using the BROWSE button in the mysql db I uploaded a 10KB logo. Is that correct? will I be able to pull the 10KB logo from PHP?
2. WHy isn't the image been comming in to flash? Will the code marked in red do it successfully?
[Code]....
3. 'ruth.jpg' is my logo name. Is my code correct in pulling it? echo '<img src="'.$line["logo"].'" alt="ruth" />';
Hi Everyone,
I'm totally going to embarrass myself with my lack of actionscript knowledge... but, I hope someone can at least point me in the right direction.
I'm designing a flash site that has 5 buttons, each corresponding to a different company. When a button is pressed, the logo for that company will appear in the body of the site along with a brief company description. So far, that's all very easy I know. But, here's where it gets complicated (at least, for me):
I've set up shape tweens (25 to be exact) so that every logo can "tween" into any of the other logos. The goal is to have it so that when you click on one of the company's buttons, the logo will shape tween from the current logo displayed to the logo for the company button you clicked. Make sense? I hope so.
When a button is pressed, the script basically needs to find out what logo is currently displayed, so that it can know what shape tween movieclip to play.
I've set up all the tweens on the timeline with Frame Labels: logo1ToLogo2, Logo1ToLogo3 and so forth. And then Logo2ToLogo1, Logo2ToLogo3 and so forth...
Can i extract the logo of FlashPÃ per with actionscript?
View 2 RepliesI am doing a project in PHP in which Users can upload videos to the website.Visitors can watch the videos in the website. There will be a logo on the web player.when the visitor clicks on the logo it has to take him to a new page.I don't know how to add a logo with URL link on a web player.
View 1 Replies