Looking For A Batch / Mass Publishing Plugin?
Mar 28, 2011
I am working on a flash project that has many fla files associated with it. Is there a plug-in that will allow me to publish many flash files without me having to manually open and publish them myself. I know in Photoshop there is a batch processing of actions but was unaware if there was one for Flash.
View 1 Replies
Similar Posts:
Oct 22, 2009
Several months ago I created this, The Halo Galactic Map. After talking with a lot of people on their opinions and such, I wanted to take it to the next level and replicate the map found in Mass Effect and Mass Effect 2 shown here.
Based on my knowledge of Photoshop and some... and by some I mean very VERY little Flash... I took it upon myself and another member of the community to create this.
All was going well until the member decided it wasn't his cup of tea. Basically, he didn't like that he couldn't do it well enough.
Ok, so I've installed Flash and tooled around with it for a bit, but I want to get going. I know this isn't the best place to post this thread - I know there are probably better places - but I just wanted to know where and what to begin with. I have the whole thing planned out in levels, layers, and motion...
View 0 Replies
Oct 16, 2011
Im the new kid on the block so I apologyze if I'm not doing very well.Everything works fine till the moment in which I set the wmode param of the flash movie to transparent, then the movie completely disappears (it loads, as I can listen at the sounds) but it doesn't show.I would like to have a full background image with the transparent flash movie over it, that's all, if somebody can tell me how to fix this or even a new way to do it, it will be so good!!Here is my code, so simple, by the way:
$(document).ready(function(){
$("#background").fullBg();
$('#flashcontent').flash(
[code]....
View 1 Replies
Mar 10, 2012
an answer here opening swf files using WebKit framework says the following about running SWF movies inside WebView inside Cocoa application: "because the Flash plug-in is not garbage-collection supported, the plug-in won't work if your application uses garbage collection".
Meanwhile, an answer here Flash AS3 animation in Mac vs Windows discusses Flash garbage collection on Mac (likely in Safari) and says that it sucks but it does exist.
So is the first claim about no garbage collection in WebView false or is the WebView plugin distinct from Safari plugin?
View 1 Replies
May 31, 2002
I have... ~1300 "Drawing Objects" (read: Shape) sitting on the stage that were Paths in Illustrator and were pasted in as part of one cohesive image. I need to be able to access all of them via ActionScript, but as with my post on the AS side of this problem, they are all stuffed into a single Shape and not accessible independently.
View 2 Replies
Jun 1, 2011
I have an AS3 based FLA that, for various reasons, needs nearly all of the linkages in the library reworked (need to move to a different package namespace).This particular FLA is pretty big, so doing this by hand would be rather tedious.I have considered saving out the FLA as an XFL, and just hand editing all of the XML files in the LIBRARY folder, and then saving out as FLA. Has anyone tried this? I have never worked with XFL files before, so I don't know what quirks I may run across.My problem has to do with loading SWFs and class conflicts because of multiple SWFs using the same package namespace. Without getting into too many details, I know about ApplicationDomain and LoaderContext. I am currently loading into a new ApplicationDomain, but that isn't an ideal situation and is causing grief that won't be maintainable in the long run.
View 1 Replies
Sep 22, 2010
Any easy way to mark an entire package/directory and all subfiles as being [Deprecated]? I'm about to separate a large number (500+) of genericly-coded library files from our more app-specific ones, and need a way to notify developers they are using the files that have moved so they can point them to the new directory. In the meantime I'll be opening them all one-by-one
View 1 Replies
Jul 21, 2004
I have a folder with a number of photos. In my XML file i have the paths to the and a description. Now i want to preload all the photos in Flash in 1 time. I do to preload the photone, i want to preload them all in one. Does somebody know h
View 1 Replies
Oct 9, 2009
I'm trying to update a series of buttons with a for loop automatically. These buttons will have a somewhat fixed instance names like btn1,btn2,btn3,btn4.My problem is i don't know how to reference the button names with a dynamic variable appended..I have something simple like this, but can someone point me in the correct direction for the syntax please?[code]
View 2 Replies
Apr 15, 2008
I would like to create a mass of images which doesn't have the same size/ratio. The images cannot overlap, but they should be placed as close to each other as possible, so you get a big picture created by a lot of small ones.
View 1 Replies
Jun 2, 2004
How to get mass speed movement like in this intro site. [URL]. How to control the multiple clip mass speed movement....using actionscript.
View 12 Replies
Jan 30, 2012
im trying to make a simple BMI (Body Mass Index) Calculator but it doesn't seem to be working
my code is:
on (release) { BMI_SUM = (Number(WEIGHT_INPUT.text) / Number(HEIGHT_INPUT.text * HEIGHT_INPUT.text)); _root.BMI_FINAL.text = BMI_SUM; }
the BMI_FINAL.text box always displays NaN, and when traced it says Undefined and the code looks sound but i cant get it to work.
View 6 Replies
Aug 21, 2011
I am looking for solution to convert swf into flv in a batch
like using command line or sdk
there is solutions but the are very expansive like moyea swf video converter
View 2 Replies
Aug 20, 2009
I've got about 7000 eps files that I need to batch convert to swf. The catch is that I need to dynamically load these swfs through actionscript 3. Most of the solutions I tried (illustrator) created avm1 swfs, which cannot be dynamically loaded through as3 as a displayobject.
Is there any way to do this? Maybe a batch job in flash itself? The only solution I've found is to open the eps files individually and export them as as3 movies, but I obviously can't do this for every file. The other option is to somehow bypass the avm1 limitation in as3, but I haven't been able to find any info on that.
View 4 Replies
Jan 17, 2005
I have a whole bunch of WAV files, and for each of them I am to create a SWF file, which will contain this WAV (of course compressed as MP3) on the first frame, and then on a separate leyer there will be a stop action on the last frame, corresponding to length of this WAV. The SWF is supposed to have the same name as WAV. I s there any way to automate this process?
View 1 Replies
Apr 1, 2009
I have 290 transparent .png image files that i would like to be quickly added to a movie-clip so that i can use it as an animation. (As2 or 3 either way).
The pictures are all the same height/width and format. Is there a quick way i could import them to a movieclip quickly, as manually drag and drop into the movieclip is tiring?
View 1 Replies
Jun 30, 2009
I need to run a batch file which needs to execute a local windows program.
How can I call that batch file insides AS3?
View 2 Replies
Oct 24, 2010
I want to create a custom chatback badge in Flash to match the other buttons on my site. I am a newbie to Flash using CS4. I don't have a preference of actionscript 2.0 or 3.0. I've figured out set up the url, but all I want to do is get the little dot next to my name that says whether I am online, busy or offline. It is an html code, and I dont know how to put it into Flash.
Here is the html code:
<img height="9" width="9" style="padding:0 2px 0 0;margin:0;border:none" src="[URL]" alt="">
View 1 Replies
Jun 26, 2009
I have been asking a fair number of questions here recently and have been very pleased with the responses, so here is one more for you. Hopefully I can get another solution. :]
I have a flash project acting like a menu and being published as an .exe (projector). In this file, I have a button with the following code:button1.onRelease=function(){fscommand("exec", "openfiles.bat");}
I have an fscommand folder (in the same directory as my flash file) which contains the openfiles.bat, with one line: start myfile.txt
myfile.txt is also located in the fscommand folder. When I simply click on this batch file and run it, the text file opens as it should. However, when I click the button in my flash file, a command prompt window flashes too quickly to see with some sort of error message. It says something about not finding a certain directory and defaulting to the windows directory. I'm assuming it cannot find either my batch file or my text file. I am under the impression that as long as everything is in the fscommand folder it should work properly.
View 3 Replies
Feb 11, 2011
Ive found alot swf encoders, but they're all consumer push-button solutions which have given me a noticable loss in quality, regardless if i feed them flv's or uncompressed. As of the moment the only way to get comparible quality is to import one video at a time onto a flash stage, publish, and undo so its length doesnt affect the next flash video. Anyone know of a better way?
View 12 Replies
Feb 26, 2012
I'm looking for a method or tool that allows me to make the following: import several bitmaps (pngs that are frames of an animation) convert each of those bitmaps to a sprite, put each sprite into an array in order (spriteArray_name.push[bmpSprite]). The array itself can be just exist as a static array in resource file. This isn't exactly a complex task, but I've got thousands of frames for different animations, and I really don't want to do this by hand.
I'm not an AIR programmer but, would that be a possible easy solution? It just seems like there would be an easy way to Batch this process. I'm currently using Flash Pro cs5.5 for the project. I am currently doing this at runtime, basically creating empty spites and drawing in the bmp data on the fly. But, its not going to work. I need to do this precompile (or during compile if that's possible).
View 4 Replies
Apr 24, 2010
i have a flash .fla that was compiling as a .swc with references to images, but now I need to load all these images externally and I dont have the original assets.
I know I can export them one by one, but I have a few hundred in the file, and want to find an easier way.
View 2 Replies
Sep 19, 2011
How to pass or get variables through AS3 and Batch files?
Actually My main app is in Flash CS5. I want to search root folder (Which is not possible only with AS3 alone) for number of directories and pass them to a batch file.
View 1 Replies
Jul 22, 2009
trying to combine animation and scripting together to try to make a stop motion based on pictures in my library...I had taken loads of pictures and had drawn on them to provide the frame by frame animation, and what's left now is getting them on to flash... What I used to do is to just put the images in one by one, but this time, this method is not really feasible, as I have a little more than 900 images to load this time...
My question: Is there any way to create a while loop to get each of my images into a new key frame? Like, for each image I have, an empty key frame is created, and then my image is loaded into it?
View 6 Replies
Mar 29, 2011
I'm using the SQLRunner class made by Paul Robertson and I need a way to determine when an executeModify batch has finished executing so I can safely move on to the next step and work with the data.
the function can be called with a resultHandler and progressHandler function when it's called, but I am getting a complete event with every query in the batch. I put `if (completedCount == totalCount)` in my progress handler, but it never gets called.
Most of the info is covered in these classes in the sqlrunner package..
[URL]
View 0 Replies
Feb 1, 2006
Is there a method, technique or third party item that will allow you to batch rename items in a Flash library?
View 3 Replies
Mar 4, 2002
is there a way in flash by which i can create a large number of movie clips in a single go instead of applying a loop and using duplicateMovieClip in every iteration.
View 3 Replies
Jun 1, 2011
I'm working on an interactive company, and for each campaign we create dozens of loaders. A loader is a simple flash file contains the following elements:* few lines of code for eRate (counting how many clicks have been done on a banner)* a loader for the source banner from "http://....host.../..../" + w,h + ".swf"* a button that tells what happens when a banner is clicked (different portals as us for different scripts)Is there a way to automate the process of making such files? it takes a 1 minute to make 1 swf, but the amount of loaders make the work a bit longer.I'd like to see an application that asks for a list for sizes + eRate code for each one and the URL for the source banners.
View 7 Replies
Jun 17, 2009
I've updated action script for a huge number of .flas to AS3 but forgot to change their Publish Settings to Flash Player 10 and AS3. "MovieClip(this).stop" for example does not work in their swfs.
Is it possible to change these settings by batch processing all of the .flas at once? (Through a Mac Automator droplet or text editing the .flas, etc...or ___?)
View 1 Replies
Jan 10, 2010
Batch duplicate a movieclip including its actionscript contents? and change a small part of the action script in each one, for example have it change '1.jpg' into '2.jpg' and so on?Actionscript
View 3 Replies