Any easy way to mark an entire package/directory and all subfiles as being [Deprecated]? I'm about to separate a large number (500+) of genericly-coded library files from our more app-specific ones, and need a way to notify developers they are using the files that have moved so they can point them to the new directory. In the meantime I'll be opening them all one-by-one
View 1 RepliesSeveral months ago I created this, The Halo Galactic Map. After talking with a lot of people on their opinions and such, I wanted to take it to the next level and replicate the map found in Mass Effect and Mass Effect 2 shown here.
Based on my knowledge of Photoshop and some... and by some I mean very VERY little Flash... I took it upon myself and another member of the community to create this.
All was going well until the member decided it wasn't his cup of tea. Basically, he didn't like that he couldn't do it well enough.
Ok, so I've installed Flash and tooled around with it for a bit, but I want to get going. I know this isn't the best place to post this thread - I know there are probably better places - but I just wanted to know where and what to begin with. I have the whole thing planned out in levels, layers, and motion...
I have... ~1300 "Drawing Objects" (read: Shape) sitting on the stage that were Paths in Illustrator and were pasted in as part of one cohesive image. I need to be able to access all of them via ActionScript, but as with my post on the AS side of this problem, they are all stuffed into a single Shape and not accessible independently.
View 2 RepliesI am working on a flash project that has many fla files associated with it. Is there a plug-in that will allow me to publish many flash files without me having to manually open and publish them myself. I know in Photoshop there is a batch processing of actions but was unaware if there was one for Flash.
View 1 RepliesI have an AS3 based FLA that, for various reasons, needs nearly all of the linkages in the library reworked (need to move to a different package namespace).This particular FLA is pretty big, so doing this by hand would be rather tedious.I have considered saving out the FLA as an XFL, and just hand editing all of the XML files in the LIBRARY folder, and then saving out as FLA. Has anyone tried this? I have never worked with XFL files before, so I don't know what quirks I may run across.My problem has to do with loading SWFs and class conflicts because of multiple SWFs using the same package namespace. Without getting into too many details, I know about ApplicationDomain and LoaderContext. I am currently loading into a new ApplicationDomain, but that isn't an ideal situation and is causing grief that won't be maintainable in the long run.
View 1 RepliesI have a folder with a number of photos. In my XML file i have the paths to the and a description. Now i want to preload all the photos in Flash in 1 time. I do to preload the photone, i want to preload them all in one. Does somebody know h
View 1 RepliesI'm trying to update a series of buttons with a for loop automatically. These buttons will have a somewhat fixed instance names like btn1,btn2,btn3,btn4.My problem is i don't know how to reference the button names with a dynamic variable appended..I have something simple like this, but can someone point me in the correct direction for the syntax please?[code]
View 2 RepliesI would like to create a mass of images which doesn't have the same size/ratio. The images cannot overlap, but they should be placed as close to each other as possible, so you get a big picture created by a lot of small ones.
View 1 RepliesHow to get mass speed movement like in this intro site. [URL]. How to control the multiple clip mass speed movement....using actionscript.
View 12 Repliesim trying to make a simple BMI (Body Mass Index) Calculator but it doesn't seem to be working
my code is:
on (release) { BMI_SUM = (Number(WEIGHT_INPUT.text) / Number(HEIGHT_INPUT.text * HEIGHT_INPUT.text)); _root.BMI_FINAL.text = BMI_SUM; }
the BMI_FINAL.text box always displays NaN, and when traced it says Undefined and the code looks sound but i cant get it to work.
I have some files in my src directory, some are .class files (Java class files) and some are .properties files, when I create the Adobe air native installer these files are not included. Why is that? How can I work around that?
Also it excludes .mxml files, but that's good. I'm sure that's related, how to change what it includes or excludes?
I have created a flash file that allows you to click on a thumbnail image and larger image appears ontop of a tshirt. The same way as a gallery would work. The images and thumbnails are pulled in through xml. However I have a problem, I need the images that appear on the tshirts to be .png files or gif files as the tshirt colour can be changed. At the moment my flash file will only display jpegs! I dont knwo why. The jpegs leave me with a white background, so I need the transparency of a png/gif. My actionscript is:
[Code]...
My users upload a certain kind of text file that sometimeshas references to images stored locally on their hard drive. I needto check this file either on the server or within a flash app tosee if it has these references and then grab those images in aflash app to upload to my server.So I can use FileReference easily enough to have users uploadlocal images. But FileReference requires users to select their files with a dialog box. I can't have that. Myusers wouldn't know where to look and there are typically way toomany files, sometimes with the same name but in differentdirectories.
I can also just use URLLoader with a local URL, I guess I canprobably just use Loader too? That works great. The problem here isI can't communicate with both the server and the local filesystemin the same flash application due to Flash's security sandboxrestrictions. So I can get out of those security restrictions byplacing or editing a trust file in designated locations on variousOSes. I then need to install this trust file which is more invasiveand confusing to users then I want to be...Java's method of accessing local files from a web applet bysimply signing the applet with a certificate and having a dialogbox popup where the users grants access is ideal. Is there anything
iam streaming my web cam to FMS .... i have got a latency of 1 -2 second,,,,,, What should i do to reduce the latency,,,,,, is ter any change i can make in FMS files(xml files) in order to reduce the latency......
View 6 RepliesI was messing around with some old examples, and I ran into an unfinished example where several 30k-100k XML files are loaded and stored as a string into an Array. The code looks basically like:[code]Basically, when I trace the 'this', the order of the files that are loaded is off. Out of about 10 tries, about 3 times the order is perfect. The remaining 7 times, the order is a bit off. Does anybody have a suggestion on how to ensure the files are loaded prior to the next file being loaded? I tried placing a while loop that basically delays the clock for a few milliseconds, and that didn't work either. Besides, that is not really a good solution to arbitrarily waste clock cycles.
View 6 RepliesI installed Flash CS4 Professional trial version for school use. It wouldn't install successfully. I deleted the font files the troubleshooting guide said to, tried again, but gave up. (I'm afraid to run regedit and mess up everything else I have loaded.) (I previously had the Fireworks CS4 trial version loaded, then uninstalled it.) My problem is this- I have it running, but it saves files and then they can't be opened, even if I use the save function often- it's worse when I create the file, test the movie and then save.If I try to open it again, it says "cannot open file." Once it opened a copy I had saved, and it appeared blank, even though it was 544 kb file size. I only need it for a few more days, one more assignment and I'm afraid my previous files are corrupt. I have Windows Vista Home Edition.
View 4 RepliesI'm working on making a pretty chunky game engine for games I plan on making, but I was wondering if you make external AS files unopenable such as .lib files, so that if I give it to a friend that wants to use it, he/she cannot change my code. Is there anyway to make external AS files unopenable? Also, obfuscation isn't an option for this problem as it only stops the people who hack the finished product, not stopping people who have access to the actual files.
View 2 Repliesi have attached a flash file.the problems are
1) i have palced 2 flash file on my web page.if i stop the sound on this file then the sound on another flash movie placed on my web page also stops.i want both the files to be independent to each other and controlled separately
2)if i click on play it shows loading.even after it loads the file it doesnt change itz status. if i click again on play then itz status changes to play.my codes for flash.....
soundUrl = "test.mp3";
// create sound object, assign properties and events
function createSoundObject(){[code].....
my question is to diplay random files , and i have given the code as
[Code]....
one more question is "where i need to store all these movie files. either in samefolder where the flash file is placed. or make it as a seperate folder and or in the flash file library". and one more thing is "how can i place these 20 files in a order like declaring the dimensions on the screen. do i need to put in a CSS.
I am constructing a Flash animation and I was hoping to build it by scenes. These scenes would be individual SWF movies that I could import into my final Flash file in consequential order and when finished I would have a completed Flash Movie. There would be no interaction beyond Play/and replay. Where can I get information on how to construct this and is this a recomended way to do it?
View 7 RepliesI've tried exporting a MOV file using Flash 8. I've tried converting to a MOV using ffmpegx. Neither have worked.
View 1 RepliesCan anyone improve on this? Requires Sysinternals Strings
date /T >N:output.txt
net use z: /delete
net use z: \svr-002
[Code].....
Basically it mounts a share as a network drive then runs through the share looking for swf files inside office documents.
I have no experience with Adobe Flash because others have done this out of house in the past. (time has come for me to learn - quickly)
I need to simply create "swf" files from a number of videos I have finished in Premiere Pro 5.5.
These videos are 800 x 600 videos that display at "point-of-sale". The spec is swf and not flv.
(I do not need to do anything else in Flash apart from create the video file with the swf extension.)
Just wondering what is the standard in the Industry; does the client get the ActionScript Classes and the .fla file?
View 2 RepliesI came across that website to see some products news, then I find there was a nice flash tool. You know that decompiler can edit swf files to fla files. But this tool which I want to introduce to you can edit swf to swf perfectly, amazing right? Plz check it here:URL...
View 2 Replieshow to load for example two xml files, and how to address each of the files? The red comments will explain what I want
[Code]...
I am trying to prevent users from viewing my site and then simply going into their "temporary internet files" and stealing my swfs and XML files. I have been using a great .PHP code to stop this but now I am working on a server server that only uses .aspx files. Does anybody know of a way that I can stop files from being stored in the "temporary internet files" folder. I have encrypted the files but this is not good enough.
View 0 RepliesI'm in the process of making a web page that'll successfully checked as XHTML 1.0 Transitional ([URL]), but as soon as I place in the fixit.js script under the flash object and view the page in IE, all the flash elements turn white. Quote:
[Code]...
Anyone knows how to place in flash files in xhtml files on IE without manually controls by clicking on the flash file.
Is there a way to add .as files to a subversion repository but to get it to skip over my .fla files?
View 4 RepliesSo I'm trying out Ogmo Editor with FlashPunk and I've worked out how to load and display XML-based levels. What I want to do next is simplify the process of adding new levels.
Instead of embedding each individual XML into the source, what I want to do is create a single "World" XML file that'll include all the XML levels, embed that, and use it to store all my level data. That way, whenever I add a new level, all I have to do is add it to the world file.
I've done my research and I've found that there are ways of doing so - such as the !ENTITY keyword and XInclude - but I can't seem to get either to compile in FlashDevelop.