I'm creating an application in Flex that needs to use the DVR capabilities of FMS 3.5, ideally I would like to do this using the FLVPlayback 2.5 component, however I'm struggling to find any tutorials or info on this, I was wondering is someone could point me to one.
I heard that I need the DVRCast application to do this, but this hasn't been released yet, I was wondering if I could get a rough idea of when this is going to be released?
I'm trying to troubleshoot a Flash Media Server working with a little video playback application I wrote a few years ago that has suddenly stopped working.I'm using CS3/Actionscript 3.My app uses the FLVPlayback Component, and was working well last time I checked. I recevied a report that the videos stopped working, and have been looking into it.I figured I'd add a bunch of event listeners to the FLVPlayback's ncMgr.netConnection so I could get debug info on things like io errors, net status, etc.The problem I'm running into is that the netConnection is null when I set it to anything on my Flash Media Server, and adding any event listeners to this netConnection throws errors.Here's what I've tried so far:
Playback of a local FLV file works fine.In the FLVPlayback documentation, I found an example and stole the URL of the stream they were using in the example, and that works fine, although it is an HTTP protocol stream rather than RTMP.Any attempt to access FLV files on my Media Server, which has worked fine in the past, basically cause the FLVPlayback object to sit and hang in "buffering" mode and never progresses beyond this point.The netConnection object in this case is null.Here's my code:[code]........
Again the purpose of this is to troubleshoot the video streaming from the Flash Media Server, and it seems like there is no netconnection to the server being created.Does this mean that the server is not working, or is there a problem with the way I'm trying to access the content on the server?This was all working fine before, and I have set up the server-side application .ASC files and such to allow things to work fine on the server end.
I'm using Flash CS3 Pro. I want to play over 5h FLV video by FLVPlayback. but 4h video -> no problem. 5h video -> seekbar and total time view have BUG. duration : 21117.796totalTime : 4340.615 why return different value??? FLVPlayback have limit of flv??
View 1 RepliesOur QA department ran into an issue when testing dynamic streaming with multple encodings in the FLV format that results in a stream cannot be found exception thrown by the FLVPlayback component. An interesting note is that dynamic streaming works when we use F4V files. At first I thought perhaps this was a limitation with Flash, but when I traced the code inside the FLVPlayback component I realized that the video delivery using NetStream should be supported by the Flash video player. So I'm a little confused why this error is happening. We're using the SMIL playlist format to supply the FLVComponent with the videos. I've also tested each video with a direct RTMP connection and they playback fine, so there doesn't appear to be anything wrong with the server or the files.
[Code]...
i m using flvPlyback in player in two websites but in one of the sites its not working properly, while in the other its working fine. it shows black screen there
View 1 RepliesI have a couple of lessons that I have created in Flash CS3 for Flash Player 9 with AS3.In the main timeline of the lessons I have an flvplayback component setup to connect to our instance of Akamai's flash ondemand application to stream down several videos.
I have a customer who is behind a client side proxy server that is having an issue where the first 10-15 seconds of the any video plays then the video drops out and it appears that the flash player attempts to make a connection on another port which causes multiple audio streams to play but the video never comes back.From the network sniffer read out that their IT send me it appears that the flash player initially attempts to get out on port 80 then attempts port 1935 then attempts 443. if there is anyway to stop the flvplayback component from attempting multiple connections?
I created a stripped out application that just has a flvplayback component in it and when the end user opens that one it streams the video fine. I can only assume that my lessons which are using scorm and webservices to make database updates are reaching some bandwidth limit that the end users proxy doesn't like.
[URL]
I followed the above example in AS2,but only get the error:
Call to a possibly undefined method getNetConnection through a reference with static type fl.video:INCManager.Here's my code: this.addEventListener(Event.ENTER_FRAME,
[Code].....
I have FMS 4 and using AS3, no matter what I do I can't get any of my recorded FLVs to play in FLVPlayback.
Is there somethign I'm supposed to install on FMS to get it to play properly?
WHat should my path be? I've been told that the flv are living in the fms/applications/storyvideos/streams/videos folder.
I've tried every combination of paths I can think of.
I've spent the past 2 days scouring Google and dozens (easily over 100) websites trying to find an answer to something that people do every day! I am absolutely shocked that this info is not available anywhere online.
A simple FMS3 and AS3 and RTMP and FLVPlayback example. totaly not simple and not possible to find
[Code]...
I'm using the FLVPlayback to load streaming videos from a FMS. The bug that I'm running into is with the buffering state. Several times the video will enter a buffering state that never ends. The last video event that's fired in this scenario is the BUFFERING_STATE_ENTERED. But if I seek the video on the seekbar, it's playing away.
View 3 RepliesFLVPlayback custom params
How do I pass custom parameters to FMS using a FLVPlayback just likeI can with NetConnection.onConnect()? e.g. Normally I pass custom params to FMS like this:netConnection.connect("rtmp://mydomain.com...", param1, param2, ... .etc); How do I pass param1... etc. to FMS if I'm using an FLVPlayback component?
I recorded videos using fms and i want to play them using FLVPlayback component. I've done some research but i cant find somethinguseful, I tried this code :
flvplayback.source = "rtmp://localhost/appname/instancename/video";
I have a live streaming application using RTMP. Sometimes the playback works fine but sometimes it stops without any trace or errors in the log file, while still appearing as a connected client.
View 7 RepliesI've read the reference here,but it seems to me that I can only make it work with live OR recorded videos.How can I make it work with both live AND recorded videos?
View 7 RepliesHow to record a live video stream playing on an FLVPlayback?
View 1 RepliesCan Adobe Flash Media Streaming Server 3.5 run on AMD Athlon Dual Sock Quad Core?I just requested a Dell server to be added to our farm to run as a Media Server and to my surprise, while reading the requirements for FMS it states the following: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended)
View 2 RepliesHow can we automatically configure edge from the admin console of flash media interactive server?
View 1 RepliesI would like to know the number of connection allowed in the free developer ediiton of Flash Media Server.
View 4 RepliesI'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
I have to a problem using the Flash Media Interactive Server Feature Explorer. I want use the sample: RecordStream. I can see the instance "RecordStream" in console FMS 3.5. and show me the video in app AIR, but does not save the .FLV in my server.
View 6 RepliesApply the security patch found here:http:[url]............For more information see the followingresource:CVE: 2009-1365
View 1 RepliesI have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 RepliesOur flash media server stops taking connection sometime. Any one have any idea about sophos antivirus?
View 8 RepliesWe purchased FMIS and we are encoding large 15+ hour MP4 recordings using flash media encoder. When opening these large files for playback, which have not been opened recently the player displays the loading indicator for up to 4 minutes! Once it has apparently been cached on the server it opens immediately from any browser even after clearing local browser cache. So a few questions for the experts
1. Why is it taking so long to load the file. Is it because the MP4 metadata is in the wrong format and the file is so huge? I read somewhere that Media Encoder records with incorrect MP4 metadata is that still the case?
2. Once its cached on the server, exactly how much of it is cached. Some of these files are larger than 500mb.
3. What fms settings do you suggest I change. FMIS is running on windows server R2 64 bit, but FMIS itself is 32 bit. We have not upgraded to the 64 bit version. We have 8GB of ram. Is it OK to set FMS cache to 3GB. And would that only have enough room for 3-4 large files, because we have hundreds of them.
is it possible fast forward, rewind video in flash media server through flash action script ?
View 5 RepliesI am using flash media server 4.5 for video streaming and genrate log files. In log file i have found the user publish point name in "x-sname" filed but this filed contains blank values in many events.This fileds contains value only in "PUBLISH,UN_PUBLISH,RECORD and PUBLISH_CONTONUE" event and other then these 4 events all events are not user related event.?I like to fetch the user bandwidth detials using these log files which user used how many bandwidth.I also like to know I can see serval files on flash log folder name "access.00.log,access001.log and admin.00.log,admin.001.log" Any one please explain what is the name convation for this filed how can i identifiy which files contains information for which date.?
View 1 RepliesI'm building a video conferencing applicaition for a portal. But now when considering which version of flash media server to buy, I run into some problem. So can anyone helps me about comparing this two versions: Flash Media Streaming Server and Flash Media Interactive server, like if I use Flash Media Streaming Server, some function like NetStream.pause() may not work or something like that? I'm not sure if this is a foolish question but please let me know.
View 3 RepliesI'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
I need to move recorded media files at my fms account to some other ftp account. How can i achieve this through server side scripting.
View 2 RepliesI am working on streaming programs through "Adobe flash Media Live encoder" in my website.The steps that i done for streaming is
* Installed Adobe flash media live encoder
* In the FMS URL entered as " rtmp://myserver ip/live "
* In stream given as "livestream"
* when i click connect the follwing error is displaying " Invalid primary FMSURL "
The website i am going to implement is [url]... which is done using PHP. Is there anything i have to do in coding to connect the media server.