Initially I had local ip (say 192,168.1.XX). Now I connected to public ip. I opened flash media server administrative console, it ios not allowing to use 'public ip' but allows to login as 'local host'. Because of this i am unabvle to test my streams. I need to publish this on cdn.
Earlier URL - rtmp:.//MY_LOCVAL_IP/vod/sample - works
but - rtmp://MY_PUBLIC_IP/vod/sampe - does not work
I tried some applications like vod and live with localhost.Now I'm trying to use some applications on my site. It's the first thing you need to do, but apparently it's so basic that I can't find information about it.Can someone explain me how to change the "localhost" to a webserver? In other words, how do I set up an application like vod on my site?
View 10 RepliesI install the latest version of apache before the FMS4. After the installation completed, I copied webroot, applications and other files to the web sites home directory. I also updated the FMS.ini file in the config folder. Because I am not familiar with FMS, I don't know whether the change is correct or not.
View 1 RepliesI'm trying to debbug my code on Client side (Action Script 3) that works with Flash Media Server 4 on localhost. Everything seems fine up to that point.However, when I'm trying to test my player with other remote streaming servers, I notice bugs because of lower bandwith transmission between the server and the player.Is there a simple way to simulate lower bandwith with FMS4 on localhost (by config, application.xml, programmation...) ?
View 2 RepliesI have install the Flash Media Server and Flash Media Live Encoder. Everything run perfectly when I test the Live Stream through localhost, but if I try to embed to another machine, it is failed.
View 1 RepliesI'm trying to debbug my actionscript (AS3) code on Client side that works with Flash Media Server 4 on localhost. Everything seems fine up to that point.
However, when I'm trying to test my player with other remote streaming servers, I notice bugs because of lower bandwith transmission between the server and the player.
Is there a simple way to simulate lower bandwith with FMS4 on localhost ?
by config, application.xml, etc.?
by programmation (main.asc) ?
both ?
I have FMS 3.5 (Streaming Server) installed, and I am trying to have it render media from locations other than default. Here is my setup.
[Code]...
Basically I am trying to render media specific to different departments (test,test1). So "Department Test" media files are under [E:ContentFMSapplicationsvod est] and "Department Test1" media files are under [E:ContentFMSapplicationsvod est1]
I need to change the default location of VOD media files from opt/adobe/fms/applications/vod/media.what I did:1. Created a dir test under default "media" dir2. Placed my f4v files inside "test" dir3. Modified applications.xml as follows:
<Application>
<StreamManager>
<VirtualDirectory>
[code].....
I need a way to set the permissions (ex 0777) for the recorded streams without calling any additionals scripts.
View 2 RepliesI'm using the RTMFP protocol to publish and play video and audio, but i'm with a little problem. I installed the FMS 4 Development Server in a Windows Server machine located in our local network and it works perfectly. In order to deploy our application, we have a remote server with a fresh install of the Ubuntu 10.04 Server, and the FMS 4 installed in this server. In other server we have the Java and Flex application, which will be used in the client browser.
The problem is that when trying to change the NetConnection url to the remote FMS server, which is the Ubuntu server, the netconnection can't connect to it. When changing to the RTMP protocol it connects, but with the RTMFP don't. I can't find any information in the log files or anything else.
I try to switch or change a server-side stream, it starts lagging after 2 seconds of playing and sound disappears. Here are scenarios that result in that terrible lag:
1. I create server-side playlist with stream.play() with reset=false; when it is time to play the next movie in the playlist, it starts lagging after 2 seconds.
2. The same problems appears when I just switch streams. I installed FMF Feature Explorer and tried to launch SwitchStreams sample application: the same problem - server stream starts lagging after I switch streams with stream.play().
I tried on different servers (local and remote), with different players (debug player of FMS Admin Console, Standard Flash videoplayer component, OSMF player, Flex video player). I also tried all possible flv, f4v and mp4 file compression options for video files - still the same problem. I have also tried literally thousands of Application.xml settings: changing buffer, buffer ration etc. Is there any tip where I should search for a solution?
when sending a stream (stream - ns.publish ("livestream")) how to change settings, say the format for VP6?
View 1 RepliesHow do I change the port from 80 to 1935? I am using server 2008.
View 8 RepliesI'm sorry, but I wanna change the dimension of the built-in flash player that we get from installing the FMS.. can i do that?I need it to fit my web in the center, and on the left & right side there's bar for ads..anyway, I embed my web with the videoPlayer.swf I got from this folder:"C:Program FilesAdobeFlash Media Server 3.5samplesvideoPlayerswfs"then I checked the source folder and i realized that it's builed with Flex, and I'm not proficient in Flex.After that I tried to decompile the .swf file using sothink swf decompiler and recompile it again, but it gives me error message in Adobe Flash CS3 Professional.
View 2 RepliesMy company has recently asked me to install the Adobe Streaming Server 4.0.I was wondering if it is possible to have the server software reside on the C: drive, while having my VOD files on seperate D: drive.The staff here wants to separate the software (server in this instance) from the individual flash video files, so they have set up two drives.
View 2 RepliesAre there any Air + Zend Amf examples that use a real world web server and not localhost?
Basically I cannot get an Air or Flex application connected to a remote mysql db to work once deployed. How can I successfully move a finished application to a normal web server (website).
When testing everything works no problem but as soon as I deploy the gateway.php (regardless of where i put it on my web server) will not connect. I've even tried flash builder 4 auto generated code and still no luck
problem with a website that when I see in local mode everything is ok but when upload it to the server something is wrong , if you go toin the Menus section if press the photo and then try to expand it, not expand properly, so you have to press again to view it correctly. I know that the problem is in the actionscript but I don know how to fix it
View 3 RepliesI want to change the logs files directory from: C:Program Files (x86)AdobeFlash Media Server 3.5/logs to: D:fmsLogs in adobe in: Home / Flash Media Server 3.5 Configuration and Administration Guide / XML configuration files reference it says:
[Code]...
i have a iis need 80 port so how to change default port 80 in fms4.5
View 1 RepliesWe have an application that so far uses AS3/AMFPHP, but we are finding this "request-response" model limited and feel we could make better use of sockets to deliver a more streamlined experience.The application is primarily a data-application containing no media streams.We want to open a socket to FMIS and use this as a pipe in which to stream data to and from the application.Consider this situation however, when values can be adapted externally outside of the FMS application: Example:A user who connects with $0.00 at the start of a Flash Client session, may topup money, via paypal externally. At this successful point, the users database value has $10.00, but FMS is still $0.00.How can FMS be informed of an external event such as this and update the client accordingly in real time?
View 1 RepliesI can't seem to get setProperty to affect any change detectable by getProperty, or any other means.
* Can you please help me find and fix the problems in my code? Also, it would be great if you could provide a snippet of code to both read/write to the SO from the Flash swf client, and changes required in the FMS server-side code to receive events onSync from another FMS server (also sending to another FMS server.. I know it should be very similar in theory).
[Code]...
I am trying to add to my site a feature that allows users to select a set of images in Flash (AS3) click a button and have my server create a zip file of all the images for them to download.
I have already wrote my code in flash and crated my php script and tested it on my localhost and everything works great. But when I upload the same files to my sever no zip files are created. Below is the code for both my flash and for my php.
Localhost server is using 5.2.17 and so if my Server hosted on 1&1
Flash Code To Send Info to PHP
Code:
function MakeZip():void
{
var variables:URLVariables = new URLVariables();
//variables.Image1=img1;
variables.ImageList=OrderItems;
[Code]....
I have a flash app which runs on my browser using Apache with PHP.This app displays items according to xml files which can be created anew
or added to.When the user changes these files via php, these changes are not reflected in the app. If I close the app and re-start the changes are there.Is there some way to refresh the localhost in the program?
Iīve a problem with a website that when I see in local mode everything is ok but when upload it to the server something is wrong , if you go to [URL] in the Menus section if press the photo and then try to expand it, not expand properly, so you have to press again to view it correctly.
What I donīt understand is why I see the web correctly in local and not in when itīs in the server.
My file reference function is not working when i upload my swf into my server. I tried in localhost it works. I tried publishing in HTML it works. I wonder what's wrong.Here is the screen shot of my code.The file reference is suppose to allow the user to save the "var ba" to their local hardisk.Edit : i found that my preloader is the main cause. Any code i should put in my preloader so the file reference will works?this is the preloader cod
Code:
import flash.net.FileReference;
var loader:Loader = new Loader();//declaring new loader variable
[code].....
That is , I don't need to terminate the current publishing video then republish again.I just want to change the publish mode,maybe from live to recorded mode.
View 3 RepliesWe are trying to install our Adobe Flash Media Interactive Server. The problem we are facing is that Apache which comes with FMS is set to be run from /home/Apache2.2.21_x64 for some odd reason. Even though we install whole FMS to /opt/adobe/fms folder Apache still has /home/Apache2.2.21_x64 everywhere compilled in. Is there a way to change Apache root folder?
View 1 RepliesI am trying to add to my site a feature that allows users to select a set of images in Flash (AS3) click a button and have my server create a zip file of all the images for them to download.
I have already wrote my code in flash and crated my php script and tested it on my localhost and everything works great. But when I upload the same files to my sever no zip files are created. Below is the code for both my flash and for my php.
Localhost server is using 5.2.17 and so if my Server hosted on 1&1
Flash Code To Send Info to PHP
function MakeZip():void
{
var variables:URLVariables = new URLVariables();
//variables.Image1=img1;
[Code]....
I want to build a flash application that upload images to the server. It seems to work fine on localhost but when I upload it to the server it just won't work. The file does not upload.
as3 code:
Code: Select allvar FR = new FileReference();
var imagesFilter:FileFilter = new FileFilter("Images", "*.jpg;*.gif;*.png");
function onUploadClick(e:MouseEvent):void{
[code]....
I know the stream can only be modified at publishing side by previous posts. I was thinking of using Server shared objects, but it's not supported by lite.
View 2 Replies
