Each time the server gets rebooted we receive an invalid license key warning in the event viewer application log. Will this cause the server to stop working? Our license key is valid.
The C:Program FilesAdobeFlash Media Server 4.5licenses folder shows the files- sif35.bin,sif40.bin,sif45.bin and sif.bin.
Looking through our windows event viewer application logs, I've noticed alot of these warning listed. What would cause they messages to generated? Anything to be concerned about? It seems they're all created in between live event streams - after a live stream has stopped published and before the next live event stream begins, about a 20 minute break.
[Code]...
We just recently purchased a second copy of Media Server, and will be getting the 4.0 version. We are not yet readu to deploy 4.0 in production, where we are using 3.5. Can I use the 4.0 code to install a 3.5 version until we upgrade all to 4.0?
View 4 RepliesI bought Adobe Flash Media Interactive Server 3.5 License for unlimited connections while ago (11 months ago) (for $4,500), but closed my project few months ago (2) and I need money at the moment, thats why I am selling my license, I am not going to use it again, I am giving all the information that came with the license, and help for installing on LINUX Servers (if needed).url...
View 3 RepliesHow many servers can have the same license ? Is it limited to one server or it is possible to use it for more than one server ? I was planning on using the Flash Media Enterprise Server 4 version.
View 1 RepliesSoon we will get a FMS license to run some web games on our websites. The FMS server will be on a dedicated server. We need to have 2 machines like that. the second is a rescue server which will be used in case of trouble with the first one. Here is my question: Can we use one seruial number for these two machines, knowing that only one of those will run (master server OR rescue server)
View 1 RepliesWe bought FMIS 4.0. Is some other license required to multicast?
View 1 RepliesI just install 2 FMS 4.5 server and HTTP streaming is not working Tried using OSMF with HDS-LIVE ... failed Tried using SAFARI with HLS-LIVE failed too but when tested on my trial server, everyting is working fine. The open ports are 1935 and 80 Do I need to restart the server to make it works?
View 2 RepliesWe are getting message "Connection has been rejected due to license limit" in flash media server 2.0.5 at the time of connecting to the server. Previuosly that server works fine but today when we tried got above message. May be some changes occur on the system as we dont have controll for that system. But we can check FMS 2.0.5 on that system through managment console of FMS. Please suggest us in which direction we have to look.
View 2 RepliesI had installed a FMS 3.5.6R6003 in a Cent.O.S linux with an Edge configuration... and i have found the following error in the /var/log/messages...!!!
Configuration[19756]: Invalid value set for configuration key : Application/Process/Distribute = Instances, using default to be compatible with inst..Configuration[19756]: Invalid value set for configuration key : Application/Process/Scope.numprocs = 5, using 1, to prevent app inst getting split among multiple processes.
But, even with this warning, the FMS is running apparently normal...
Sometimes RTMFP stops working on my server, and I have to restart it for RTMFP to work again.Here is what I saw in the error log :
2011-04-29 05:43:17 26120 (i)2631502 The server rejected an invalid flow. -
2011-04-29 05:44:22 26120 (i)2641213 Connection rejected by server. Reason : [ Server.Reject ] : Adaptor: _defaultRoot_, VHost: TheFMSServer, App: Application/_definst_, (onConnect call
[code].....
Beside Flash Media Encoder, can I use a live stream from Windows Media Services?We have live streaming with Windows Media Server, but now want also offer to mobile devices, but we dont re-encode the entire streams (tvs) again, it would be great if we can use a stream from windows to tunnel it to flash media server.
View 1 Repliesit doesn't matter which operating system we install an our server.What are your experience with Linux and Windows?Which System do you recommend regarding performance issues?
View 1 RepliesDoes is matter what HTTP server I use?In the process of upgrading from FMS 3.0 on Windows using IIS 5 to FMS 4.0. Will dynamic HTTP Streaming work from a Windows server?
View 1 RepliesCurrently I have a music player that uses FMS on Windows 2003 Server/IIS 6 in a .Net app.I'm trying to move to Windows Server 2008 with IIS 7. However, the player doesn't begin playing from my list when the asp.net page loads with the player. However, if I run my code in debug mose in Visual Studio on the server, the player is functional. Which leads me to ask - can I use FMS in the fashion I want to? If so, how can I set up my site? I tried putting my app pool into classic mode, which didn't work.
View 1 RepliesI have FMS for developper 3.5.4. I have 2 computers:One called SVR with windows 2008 on it with iis7.One called PC with windows 7 which is my client.
[Code]...
I am using flash media server 4.5 for video streaming and genrate log files. In log file i have found the user publish point name in "x-sname" filed but this filed contains blank values in many events.This fileds contains value only in "PUBLISH,UN_PUBLISH,RECORD and PUBLISH_CONTONUE" event and other then these 4 events all events are not user related event.?I like to fetch the user bandwidth detials using these log files which user used how many bandwidth.I also like to know I can see serval files on flash log folder name "access.00.log,access001.log and admin.00.log,admin.001.log" Any one please explain what is the name convation for this filed how can i identifiy which files contains information for which date.?
View 1 RepliesFMS does not start in win 7.There were some starts but only when first run after the installation. (i checked it 3 times) After the computer reboot, FMS does not start. Whats the problemm ?
View 1 RepliesI've freshly installed the FSM 4 on windows7, but the start screen no runnng the rtmp video and the administration console no conecting, why?
my firewalls is down and my ports is open like adobe say... why no workig RTMP and my administration console no working?
i want to make some test in flash media server and i want to install it in windows 7.in the past i can install it an work with it with no problem, now i try to install it and dont work.
View 1 RepliesDoes anyone know of any issues with running FMS on Amazon's EC2 Cloud environment? We're running some live streaming applications, but are hearing reports from users of random disconnects.
View 1 RepliesThe installation of FMS 3.5.1 r516 Development fatally failed on our Windows 2008 R2 Server. We tried an R1 server and that one installed with no issues. It gets past the MS C++ installer, then shortly after:
[Code]...
FMS 4.5.1 Windows 2008 SP2 (64bit).We are deploying Adobe Flash Media Server 4.5.1 on a new server but Apache does not work (does not serve html files or stream Quicktime H.264 files).Assorted Problems & Error messages:
1. The webroot/index.html page loads locally, but the HLS/HDS streams result in a 2032 error.
2. The webroot/index.html page does not load from external locations:[URL] (does not load externally).[URL] (our old server, FMS 4.0 and Windows 2003). Everything on this server works, the 2 major differences being that it is running FMS 4.x on Windows 2003.
Some RTMP streaming works externally and internally (f4v files):[URL]FMS does not stream Quicktime H.264 files even though f4v files work.New server (does not work): [URL]Old server (Quicktime/H.264 file works):[URL]Apache does not serve Quicktime/H.264 files: I made sure that Apache had all of the correct mime types specified.
Error messages and attempted solutions:Apache's erro_log file: a. httpd.exe: Could not determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
2. FMS master.log file
a. FMSHttpd -k start returned 1: [URL]1a: Edited httpd.conf file to include ServerName 63.116.232.5
1b: The presence of this error message also indicates that Apache httpd was unable to obtain a fully-qualified hostname by doing a reverse lookup on your server's IP address.
In order for the server to accept external connections a reverse DNS lookup needs to be created. I created a reverse DNS lookup and edited the /etc/hosts file to include the IPaddress, Fully Qualified Domain Name (FQDN), shortname.
[code]....
my device (Dazzle DVC 150) is not showing up. It will show u inother programs and on my laptop works in this program. I also get an error saying "Please ensure your video capture device is working properly and is not in use.
View 1 RepliesJust installed Windows 7 RC (7100), and got the latest Flash player for IE8 and Opera. My site [URL] has a music player I created that plays (streams) MP3s from a Flash Comm Server I run. The player works fine with Flash Player version 10.0.22.87 on other platforms, but not in Windows 7. Once you pick a song, it should start immediately. Even clicking the play button doesn't work. The symptoms make me think there's a problem establishing the netconnection for streaming.
I've read Microsoft added streaming of some kind in Windows Media Player for Windows 7, could it be interfering?
Might be a dumb question but a client has Windows 2003 Enterprise SP2 R2 and I was wondering if Flash Media Interactive Server will install and run fine on it? The requirements on the site say Microsoft® Windows Server® 2003 with Service Pack 2 but no about "Standard" or "Enterprise".
View 5 RepliesFor the past while, my developer has been working with me on a small project to put together a live interactive whiteboard app, powered by Flash Media Interactive Server. Well, everything is finished & ready to go, but there seems to be a big problem:
The app was developed & tested on a windows machine, while my server and all my website files (to integrate with) is on a Linux system.
It's been a month since this problem arrose, and there had not been any further progress with this project for the time. My developer doesn't seem to know much about how the 'conversion process' works, if there is one.
Do you know if this is possible (to convert a windows-programmed app to work on a linux system)? If so, do you know roughly how it should be handled?
I have installed fms 4 in windows 7 in my computer, but i cant get it work with a flex application that i have in a server. I added the port in my router's settings
[code]...
I'm utilizing the developer edition of FMS and am trying to republish a stream that is being broadcast with Flash Media Live Encoder (FMLE) unfortunately, I am unable to get any audio or video to display in the client application. The client app can get the stream from the published to app (e.g. CamChat) but not from the republished stream. Following is the output of the trace statements from the SSAS as well as the source for main.asc:[code]The ultimate goal is to subscribe to stream(s) that will be coming from our Limelight FMS and record them to our local FMIS server.
View 7 RepliesI'm using FMLE 3.1 to stream live video encoded with H.264 format with FMS 3 and Flash player 10 + AS 3 to connect to the stream. When I connect to the stream, just the audio is played. I'm able even to get the metadata information about the video, but I just receive the audio. I already tried some stuff like
1. "Flash 10 won't play live stream H.264 after iTunes install" [URL]. I tested it in a complete different environment than mine, but the same result.
2. I've tried some format to play method, but this is just to play files
ns.play("mp4:saple.f4v"); ns.play("mp4:sample");
3. Also read "How do you watch and record a live h.264" [URL], but I don't get even to play the stream at first place. This is the code I'm using
import flash.media.Video;
var video:Video = new Video(720, 480);
var ncVideo = new NetConnection();
this.ncVideo.addEventListener(NetStatusEvent.NET_STATUS, onNetStatus);
[Code] .....
Another detail is that when I record the video to a file for instance "sample.f4v", I put this video in the FMS but when I connect to this stream I receive the "FileStructureInvalid" error message. I went from changing the extension to .flv [URL] to the solution to flatten the files [URL] but this is not the case because I'm using FMS to stream the recorded video.