We just recently purchased a second copy of Media Server, and will be getting the 4.0 version. We are not yet readu to deploy 4.0 in production, where we are using 3.5. Can I use the 4.0 code to install a 3.5 version until we upgrade all to 4.0?
View 4 Replies
I bought Adobe Flash Media Interactive Server 3.5 License for unlimited connections while ago (11 months ago) (for $4,500), but closed my project few months ago (2) and I need money at the moment, thats why I am selling my license, I am not going to use it again, I am giving all the information that came with the license, and help for installing on LINUX Servers (if needed).url...
View 3 RepliesHow many servers can have the same license ? Is it limited to one server or it is possible to use it for more than one server ? I was planning on using the Flash Media Enterprise Server 4 version.
View 1 RepliesSoon we will get a FMS license to run some web games on our websites. The FMS server will be on a dedicated server. We need to have 2 machines like that. the second is a rescue server which will be used in case of trouble with the first one. Here is my question: Can we use one seruial number for these two machines, knowing that only one of those will run (master server OR rescue server)
View 1 RepliesWe bought FMIS 4.0. Is some other license required to multicast?
View 1 RepliesI just install 2 FMS 4.5 server and HTTP streaming is not working Tried using OSMF with HDS-LIVE ... failed Tried using SAFARI with HLS-LIVE failed too but when tested on my trial server, everyting is working fine. The open ports are 1935 and 80 Do I need to restart the server to make it works?
View 2 RepliesWe are getting message "Connection has been rejected due to license limit" in flash media server 2.0.5 at the time of connecting to the server. Previuosly that server works fine but today when we tried got above message. May be some changes occur on the system as we dont have controll for that system. But we can check FMS 2.0.5 on that system through managment console of FMS. Please suggest us in which direction we have to look.
View 2 RepliesEach time the server gets rebooted we receive an invalid license key warning in the event viewer application log. Will this cause the server to stop working? Our license key is valid.
The C:Program FilesAdobeFlash Media Server 4.5licenses folder shows the files- sif35.bin,sif40.bin,sif45.bin and sif.bin.
I am developing an application using Flash Media Server 4. I am calling some server side methods and response is an error while executing. How can I debug my server side script to watch exactly what is the error? I am unable to access its log also...I have administrator username and password too but everytime it fails to login on administrator due to invalid username or password.
View 1 RepliesI was looking for the source code of flex-rds-server.jar at the BlazeDS distro but I could not find it. I did some research, but could neither find this project nor an explanation of what is inside this jar. So, I guess it is not open source. Is that right? I'm right now trying to write a maven pom.xml to make a service project and seems that adobe (at least the blazeds project) is not maven friendly at all. I had to download the blazeds source code to be able to install it in my local repository, that was fine. But right now I bumped into this flex-rds-server.jar and I'm having a huge headache.
View 2 RepliesLike shared objects we have lock, but what If I want to implement lock on the particular script. For example at onConnect of any user to FMS,I have script which is doing 8-9 different tasks before or after accept the user for that FMS application session (including remoting calls).Now if 20 users came at the same time in the same room, how will FMS execute them and process the 8-9 task, which user will be executed first and who would be next.In short, how FMS will execute the piece of code or process for multiple user at the same timeSo locking system can fix this problem I think.
View 5 RepliesI have a professional license of Flex 3.3. This allows me to create applications using the data visualization components (charts) without watermarks. However, all of release builds (test, production, etc) occur on our build server.
The build server only has the Flex SDK installed (not full Flex Builder). As a result the SWFs compiled with this SDK contain watermarks on all the charts. How can I apply a Flex Builder Professional license to the build server to remove the watermakrs w/o installing Flex Builder?My build environment is Flex SDK 3.3 + CruiseControl.NET + NAnt.
How would one create custom class in Flash Media Server 4 in asc code file?[code]...
View 1 RepliesWe just shipped Xuggler 3.4 this weekend which now has the ability to record and publish RTMP streams. That means you can now write Xuggler (a Java API for encoding and decoding video) programs that can publish to FMS or record from FMS.
We've worked closely with the FFmpeg team to get the core RTMP stack into that project, and have put together a tutorial on how to use FFmpeg to record or publish streams, including re-encoding media to H264/AAC while publishing.
Can Adobe Flash Media Streaming Server 3.5 run on AMD Athlon Dual Sock Quad Core?I just requested a Dell server to be added to our farm to run as a Media Server and to my surprise, while reading the requirements for FMS it states the following: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended)
View 2 RepliesI'm trying to troubleshoot a Flash Media Server working with a little video playback application I wrote a few years ago that has suddenly stopped working.I'm using CS3/Actionscript 3.My app uses the FLVPlayback Component, and was working well last time I checked. I recevied a report that the videos stopped working, and have been looking into it.I figured I'd add a bunch of event listeners to the FLVPlayback's ncMgr.netConnection so I could get debug info on things like io errors, net status, etc.The problem I'm running into is that the netConnection is null when I set it to anything on my Flash Media Server, and adding any event listeners to this netConnection throws errors.Here's what I've tried so far:
Playback of a local FLV file works fine.In the FLVPlayback documentation, I found an example and stole the URL of the stream they were using in the example, and that works fine, although it is an HTTP protocol stream rather than RTMP.Any attempt to access FLV files on my Media Server, which has worked fine in the past, basically cause the FLVPlayback object to sit and hang in "buffering" mode and never progresses beyond this point.The netConnection object in this case is null.Here's my code:[code]........
Again the purpose of this is to troubleshoot the video streaming from the Flash Media Server, and it seems like there is no netconnection to the server being created.Does this mean that the server is not working, or is there a problem with the way I'm trying to access the content on the server?This was all working fine before, and I have set up the server-side application .ASC files and such to allow things to work fine on the server end.
How can we automatically configure edge from the admin console of flash media interactive server?
View 1 RepliesI would like to know the number of connection allowed in the free developer ediiton of Flash Media Server.
View 4 RepliesI'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
I have to a problem using the Flash Media Interactive Server Feature Explorer. I want use the sample: RecordStream. I can see the instance "RecordStream" in console FMS 3.5. and show me the video in app AIR, but does not save the .FLV in my server.
View 6 RepliesApply the security patch found here:http:[url]............For more information see the followingresource:CVE: 2009-1365
View 1 RepliesI have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 RepliesOur flash media server stops taking connection sometime. Any one have any idea about sophos antivirus?
View 8 RepliesWe purchased FMIS and we are encoding large 15+ hour MP4 recordings using flash media encoder. When opening these large files for playback, which have not been opened recently the player displays the loading indicator for up to 4 minutes! Once it has apparently been cached on the server it opens immediately from any browser even after clearing local browser cache. So a few questions for the experts
1. Why is it taking so long to load the file. Is it because the MP4 metadata is in the wrong format and the file is so huge? I read somewhere that Media Encoder records with incorrect MP4 metadata is that still the case?
2. Once its cached on the server, exactly how much of it is cached. Some of these files are larger than 500mb.
3. What fms settings do you suggest I change. FMIS is running on windows server R2 64 bit, but FMIS itself is 32 bit. We have not upgraded to the 64 bit version. We have 8GB of ram. Is it OK to set FMS cache to 3GB. And would that only have enough room for 3-4 large files, because we have hundreds of them.
is it possible fast forward, rewind video in flash media server through flash action script ?
View 5 RepliesI am using flash media server 4.5 for video streaming and genrate log files. In log file i have found the user publish point name in "x-sname" filed but this filed contains blank values in many events.This fileds contains value only in "PUBLISH,UN_PUBLISH,RECORD and PUBLISH_CONTONUE" event and other then these 4 events all events are not user related event.?I like to fetch the user bandwidth detials using these log files which user used how many bandwidth.I also like to know I can see serval files on flash log folder name "access.00.log,access001.log and admin.00.log,admin.001.log" Any one please explain what is the name convation for this filed how can i identifiy which files contains information for which date.?
View 1 RepliesI'm building a video conferencing applicaition for a portal. But now when considering which version of flash media server to buy, I run into some problem. So can anyone helps me about comparing this two versions: Flash Media Streaming Server and Flash Media Interactive server, like if I use Flash Media Streaming Server, some function like NetStream.pause() may not work or something like that? I'm not sure if this is a foolish question but please let me know.
View 3 RepliesProblem: I would like to enable code hinting and highlighting in either Flash Professional or Flash Builder when developing an Actionscript Communications File (.asc). Steps Taken: Searched Google with limited success, most signs all pointed to [URL] where one may obtain an Eclipse Plugin, but:It was created in 2007 (likely out dated)It has known bugs that haven't been addressedSearched this forum / adobe's web site to find a solution, to no avail.Posted this, now, in an attempt to put this to rest Request: how I can enable FP or FB to give code hints / syntax highlighting
View 9 RepliesI'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
I need to move recorded media files at my fms account to some other ftp account. How can i achieve this through server side scripting.
View 2 Replies
