I have a function at the server side that loads an XML and makes a photo/link array from it.I want to pass this array to the clients swf to use it for a photoGallery.nd the array = [1,2,3,4] to the client and trace it at the client side?
View 1 Replies
I have buffer of video and want to pass it to server and then republish it to the client and display that as live video.
View 1 Replieshow can I find on fms server that client disconnected if if client disconnected due to power cut off. I client manually close the application then onDisconnect on server is called but if due to power cut off it does not called.
View 1 RepliesI am trying to make clients to connect FMS4 server over RTMFP for my video conferencing application.It is basically a client-server media relay application in which clients with webcam/mic connect the server and the server relays video/audio data to other clients. This application is working perfectly with FMS 3.0 but it was RTMP rather than RTMFP - I simply replaced 'RTMP' with 'RTMFP' in netConnetion and tried to test in Flash Media Development Server 4.0, but it is failed to make a connection from a client - it was working after replacing it back with 'RTMP' of course.
I believe server-client media relay is possibe using RTMFP in FMS4 because Adobe said:"Although RTMFP is often used for peer-assisted networking applications, you can use RTMFP in unicast, broadcast, and multi-point publishing applications as well. Simply replace the RTMP protocol in the NetConnection.connect() call with the RTMFP protocol:" in url...
I am trying to create a flash player to stream an on online Internet radio station using FMS. I chose FMS after being told that I need RTMP server to extract the metadata. Our radio audio is being encoded using a DJ interface called SAM Broadcaster. But for some reason, it does not have an option to send over the stream directly to a Flash Media Server. Only options are either IceCAST or ShoutCAST. How should i setup the stream? Should it be Stream encoder>> IceCAST/SHOUTCast Server>>Flash Media Server>>Flash Player Client. Or should I setup Stream Encoder>>Flash Media Server>>Flash Player Client? Shouldn't Flash Media Server be an alternative to IceCast or Shoutcast? If that is the case, how do I send over the stream from SAM Broadcaster directly to Flash Media Server without restreaming through another streaming server?
View 2 Repliesi have a small LAN of about 8 computers all of which are running windows 7. I have installed FMS and XAMPP webserver on one of the machines. I want to stream live from one PC to all the other PCs on the LAN. I have a webpage with jwplayer embedded in it on my XAMPP webserver that is able to see the live stream when i start it locally. I mean the live stream works fine on the machine with the servers on it. But when i want to view the live stream from another machine in the LAN by accessing the webpage that has the jwpalyer from another machine, The jwplayer returns "server not found:rtmp://192.168.10.1/live" error. I was thinking that maybe a firewall is blocking the 1935 port but i have turned off the firewall of every PC on the LAN. I have unistalled any antivirus program on all the PCs. But i still get the same error when i try to access the live stream from another PC on the LAN.When i run netstat -a -n|find ":1935" i get 192.168.10.2:49184 192.168.10.1:1935 SYN_SENT and i think the request for the stream is sent but the conection is rejected.
This is the code for the webpage with jwplayer embedded in it. maybe it:
<html>head> <title>JW FLV Media Player</title> <script type="text/JavaScript" src="swfobject.js"></script>
[code].....
i am new on steaming & flash server; when we try to use RTMP over HTTP the outside client gets the internal IP address of the FMS server instead of the NAT one or public IP address, how can we solve this.
View 1 RepliesI have created a script for an Adobe FMS application to broadcast a playlist of video files as a live stream. (internet tv)
I am now working on a custom Flash-based video player to play my stream.
How do I send information from my server-side FMS application (main.asc) to the client-side video player? (e.g: title, duration of current video player)
I understand how clients use bandwidth detection etc to dynamically switch streams via client calls with ns.play2( ... ), but I was wondering if it's possible to only ever use 1 initial ns.play( ... ) call on the client side, but let FMS server side logic that I write dictate which client sees what content. For example, I have 3 clients connected to my FMS server, all watching a live stream. I then decide I want clientA to see 'recordedMovieA.flv', clientB to continue seeing the live stream, and clientC to watch 'recordedMovieB.flv'.
[Code]...
i am currently playing around with a flash media server trial in combination with the flowplayer.All in all i am testing the performance and general functionality for the company i work for.Anyways, i am trying to search a way to check the bandwidth of a client ( server sided ) and redirecting him to the right video stream.Sure this could be done by the backend flash application, but its out intention to perform this check server sided.
View 4 RepliesI want to limit server recorded netstream length to 10 secs at client side using as3. How can I do that?
View 2 Repliesway to say the same in just a few line of code? 25 lines of code people
[AS]menuAS = function () {
//TIOCCHA
menuBar.menu01.menu01_btn.onRelease = function() {
[Code]....
i am loading an image with a loader, and in onComplete function i would like to call calculateRatio function and pass it Loader.content.width and Loader.content.height so it can compare it with the current stage width and height and resize image proporcionally to fit the screen. how would i go about passing that parameters?
[Code]....
{Flash MX 2004 Pro}
[Code]...
The above does not work. Infact the function is not even called. How can I pass parameters to such functions. I dont wanna do the following:
[Code]...
I m working in flex3.0 and i just want to know that how can i call a function from fms server to my AS3.0 (Client Side) code.i tried the syntax client.call(methodname,null,null); but my flex code throw exception unable to call the method.here can i use clientobject.call (methodname,null,null) and is there some special way to declare that method at client side.
View 3 RepliesNo I have installed fms4.5, but I can't find good docs how to set something like this up. In Learning section I saw a lesson, but this one isn't ready.So I want to publish using flash and the subscribers to the livestream can be iPhones or Browsers.
View 13 RepliesCode:
function enableButtons():void
{
for (var i:uint=0; i<40; i++)
[Code]...
I have 40 buttons on the stage. Their names are contained in the Array musicGrid. What I'm trying to do with this code is attach an EventListener to each button so that it will call the function mgMouseBehavior with a parameter to identify the button. For example, I want the button at musicGrid[0] to call the function mgMouseBehavior(0). I want the button at musicGrid[32] to call the function mgMouseBehavior(32), and so on.
However, if you try to add parameters to mgMouseBehavior in the addEventListener, for example:
Code:
musicGrid[i].addEventListener(MouseEvent.CLICK, mgMouseBehavior(i));
Then you get Error 2007: Parameter listener must be non-null. How would I accomplish what I'm trying to do?
I'm attempting to write a performance testing function that can take any function, run it X times and spit out how long it took that function to run in AS3. I've got it working just fine if a function doesn't take any parameters but it comes up with an error otherwise.Here's the code:
public static function testFunction(targetFunction : Function, object : Object, ... parameters)
{
[code]........
{Flash MX 2004 Pro}
[AS]
myMovieClip_mc.onPress = foo(true);
function foo(state:Boolean) {
Do something
}
The above does not work. Infact the function is not even called.How can I pass parameters to such functions.I dont wanna do the following:
[AS]
myMovieClip_mc.onPress = function(true) {
//
}
Look at the simple code below:
Code:
stage.addEventListener(MouseEvent.CLICK,traceMe);
function traceMe(evt:MouseEvent)
{
trace ("hello world!");
}
What if I want to pass a parameter to the traceMe function? There is a way to do that?
Consider the function below:
function personal(Name:String,age:int,city:String):void{ trace(Name+" is "+age+ " years old and lives in "+city+ ".")}
The parameters can only(???) be passed in the order they are declared in the function as
[code].....
I've got an XML file that is loading in data and is calling functions.
how to call the methods from classes with variables set from the XML file:
var functionToCall:String = xml.functions.func[0].to_fire.toString();
myClass[functionToCall]();
This calls the function perfectly.
I was wondering if there is anyway to pass parameters into the function as well through variables. Some functions may have no parameters, some functions could have 5... so the xml could be like this:
[Code]....
hboxvar.addEventListener("mouseDown",dosomething(3 43));
hboxvar.addEventListener("mouseDown",dosomething(1 23));
hboxvar.addEventListener("mouseDown",dosomething(1 2342));
public function dosomething( somenumber:Number ):void {
//do something here
}
I try to do above function but I need to pass variable from hboxvar but not from inside function suggested by macromedia.
any one frustated with this way of passing multiple parameter which depends on what to pass in flex 2 using addEventListener ?
[URL]
Passing additional parameters to function listeners You can pass additional parameters to function listeners depending on how you add the listeners. If you add a listener with the addEventListener() method, you cannot pass any additional parameters to the listener function, and that listener function can only declare a single argument, the Event object (or one of its subclasses).
I am wanted to know how can i pass a parameter to the function which I'm calling using Delegate class. I know to pass params having static values such as true / false or a static string "hello".
Code:
var myFunc:Function = btn.onRelease = Delegate.create(tihs, releaseHandler);
myFunc.str = "hello";
function releaseHandler()
[code]....
Here str can be retrieved as 'arguments.caller.str' inside the function.But in case i want to pass the reference of the 'btn' button. Then how can i do this ?
I have an FLVPlayback component with several ActionScript cue points designated along its timeline. I've written a listener that successfully executes a function whenever the video reaches one of my cue points. However, I'd like it to do different things depending on which of the cue points it has reached.
Here is my code:
Code:
// these are the cue points that I'm adding to my video
_root.thevid.addASCuePoint(33, "show1");
_root.thevid.addASCuePoint(43, "hide1");
[Code]....
Essentially, I would like for the function to accept a String name from the cue point, and then decide which action to take (either showing or hiding something). I don't know the correct syntax for accepting information from the cue point. Should I pass the cue point into the function as an object, then parse its name from within the function?
I have benn programming in AS2 for a while, but I'm moving to AS3, and I'm having some trouble with syntax and mostly with management of parameters and variables (actually I tried to work with functions in packages without good results T.T). The game has four different types of shooters, and all of them use the same bullet (shoot function). I have succeeded on disappearing the target (a coin in this case) when it is hit by the bullet, but the problem is that I can't quite find the way to dissapear the bullet properly. I keep receiving this message:
ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
at flash.display:isplayObjectContainer/removeChild()
at eco_adm9_fla::MainTimeline/moveBullet()
[code].....
I'm making a function, and I want to pass it's handling less restrictively, kinda like jQuery I guess.
Code:
function cfunc(min, max)
{
return (Math.floor(Math.random()*(max-min))+min);
[Code]....
Now I know that alternately, I could pass them individually to the function and then join them all together as one, but I'd prefer to use one variable and pass the data through it, kinda like a scripting engine.
I have to load a .swf file in all connected clients by pushing a button from another client
View 23 RepliesHow to call a particular client from fms.Actually i m making a private chat application in which text messg send from one client to another specific client through FMS.So i m confused how gms recognize a particular clients.I am avoiding application .client[] array that contains all the connected users references.becoz it changes at the time of connection and disconnection of client from fms.
View 2 RepliesThere is a big problem in which i stuck .how to know that client has been disconnected if client pulls of cable or manuallu disconnect netconnection.
View 1 Replies
