Media Server :: The Video Plays With Constant Stops?
Mar 19, 2010the people from my server installed fms 3.5, but the demo video with that train stops every other second. Should I adjust something in settings?
View 8 Replies
Similar Posts:
Media Server :: After 70 Minutes, The Video Stops Playing?
May 13, 2010I bought Adobe Flash Media Streaming Server 3.5 and I have problems with large video.After 70 minutes, the video stops playing.
View 8 RepliesMedia Server :: Live SWF Video Plays Locally But Only The Skin Is Visible Remotely
Jul 18, 2011I have tested other embedded videos and they will play remotely so I know the hosting site is working.Currently,the live video will play locally and remotely from this computer where all the files are stored but only the skin is visible on any other remote computer's web browser.
View 2 RepliesIDE :: Flash Video Plays For 2 Seconds And Then Stops
Jun 19, 2009[URL] Some of the clips play fine, others play for 2 seconds and then stop.
View 2 RepliesMedia Server :: Fms 3.5.2 - Video / Audio Streaming Application - Audio Stops Or Lags Behind
Aug 25, 2009I ran a simple live video streaming application for the first time with actual users and ran into a couple of serious performance issues that had not turned up during testing. In this instance there was one video stream from a live web cam and used FMLE at 150 kbps using VP6 and MP3 @22k. There were 16 clients and everything worked pretty good for about 30 minutes. (although some clients said their audio and video were out of sync by up to 3 seconds)
Then individual clients would have either the video freeze or the video would continue and the audio would stop. These clints had to "disconnect" and then "connect" again to the application. This happened to all of the clients at one time or another for several minutes. I stopped and restarted the FMLE with progessively lower bandwidth settings down to 75 kbps but still clients were having the same issue.
I eventually stopped the FMLE and used the applications built in publisher at 45 kbps and that seemed to eliminate the freeze/dropping issue. But of course the video quality was very poor and some clients still reported that the audio was out of sync with the video. The server hosting the FMS application is a quad processor dell with lots of memory and network connectivity. The Flash Media Admin Console performance graph showed the total Bandwidth as 3 Mbps at maximum.
Media Server :: Flash Media Server Stops Accepting Connection?
Oct 21, 2010We have one application in which we are using flash media server 2.0.5. We dont know why it's stop taking connection occasionally at that time we can't enter into the managment console. We get a white screen. When we try to enter user name and password it's does not accpet the credentials. We are not getting anything in the log.Port number 1935 and 1111 of the particular system where FMS has placed are working fine.
View 7 RepliesMedia Server :: Video Chat Over IP Using Flex IDE And Flash Media Server For Live Streaming Video And Audio?
Feb 15, 2011I am developing Video Chat over Ip (including audio and text too). But I am unable to get the proper startup material for my desktop application.
View 2 RepliesMedia Server :: Fms Live Stream Server Stops Sending Data Around 4+hrs?
Mar 21, 2012My rtmp client connects to the server ok and rtmp data flowing ok for about 4hours, in the wireshark trace I can see that the server just stops sending data roughly after 4hours. The server version is 3.5.1, and I also try it on a 4.0 server the data stops coming from the server as well after 5+hours. There are no errors or any indication of session disconneciton in the diagnostic logs. I have also looked thru the settings in applicaiton.xml and server.xml I just don't see any obviious reason for the issue. I do send rtmp Acknowledgement to server after the client receives "window size" bytes, and the client sends ping response to server.
View 1 RepliesActionScript 3.0 :: Flash File Plays One And Stops In End And Only Plays Again
Dec 11, 2011I want my flash file plays one and stops in the end and only plays again if play again button is pressed.How do i do it?
View 1 RepliesMedia Server :: Restream Stops After A While?
Mar 20, 2011I configure my server to republish all streams from live to multicast using this tutorial.When the streamer connects to the server and starts publishing something to "live" the server automatically restreams it to multicast. But after a while p2p stream suddenly freezes. The main stream continues to work. In the server logs nothing interesting, just onUnpublishing
View 7 RepliesMedia Server :: Error 1046 - Type Was Not Compile Time Constant
Jul 5, 2011The error is: 1046: Type was not found or was not a compile-time constant: MouseEvent.
Code:
package {
import flash.display.Sprite;
import flash.media.Camera;
import flash.media.Microphone;
import flash.media.Video;
import flash.net.NetConnection;
[Code] ......
Flash :: Media Server - Send Video And Audio Data To A Media Server By Using RTMP Protocol
Jul 22, 2010I'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
Media Server :: Multicast Stops After About 2 Minutes?
Feb 28, 2011We are testing IP Multicast, with Flahs media player 4.0. We set up the encoder and generated the manifest file. Multicast start, but we see lot of bufferring and video running fast. After about 2 minutes, the encode stops publishing to the server. We are using digital rapids as the encoder.
View 3 RepliesMedia Server :: Posible Fast Forward / Rewind Video In Flash Media Server?
Sep 23, 2011is it possible fast forward, rewind video in flash media server through flash action script ?
View 5 RepliesActionscript 3.0 :: Movie To Loop - Movie Plays A Certain Number Of Times Then Plays The Opening Of A Screen Then Stops
Aug 30, 2011I want my movie to loop. Would prefer an If/Else loop so that the movie plays a certain number of times then plays the opening of a screen then stops. This is a simple 4 screen ad I am doing for a school project. Can't get it to work. I tried containing my code in the proper loop syntax, didn't work. Then wrapping the loop in a function and calling that with a timer event, didn't work. My final solution was to call my whole movie in a timer event set to play once. Then calling the entire movie again in a second timer event set to play 20 times and set to start at an interval when the first movie ended. This did work but each time the movie plays thru function calls drop off making the movie degrade.
[Code]....
Media Server :: Serverside Recording Suddenly Stops?
Jun 3, 2009I've implemented a serverside script that records the current stream to disk. This record method is called from another clientside flash application. On some occasions the recording suddenly stops after a few hours without giving any errors, and without there being any network dropouts (Flash Media Encoder doesn't report any dropouts). What can be the cause of this, and what can I do to make the recording more stable?
View 7 RepliesMedia Server :: Recording Stream Suddenly Stops
Sep 2, 2011Our team is developing an application that allows users to communicate via their own camera, and make a record of all user's cameras that are in the same room. However we have come across an issue with our FMS 4 server. The issue is that sometimes when a user records all streams in a room at one point the recording process for particular streams suddenly stops but at the same time streaming is still working. For example, 2 users were broadcasting and one of them was recording their streams. At the end of the recording there were 2 flv files, however one of them was only a quarter of the actual length. The logs for the damaged stream were:
- publish stream at 10:48:38
- play stream at 10:48:38
- record stream at 10:48:44
- unpublish stream at10:53:11
- stop stream at 10:53:12
Total length of the flv file should be more than 4 min but actually it is only 1 min 12 sec.
Media Server :: Stream Video With Flash Media Live Encoder To The Server?
Jul 19, 2011when i try to live stream with FMS! I can stream video with Flash media live encoder to the server but when i create the player to recieve the livestream from server,i can not recieve the live stream,can anyone give me a step by step tutorial of how to do it?
View 1 RepliesMedia Server :: "Server Rejected An Invalid Flow" - RTMFP Stops Working?
Apr 30, 2011Sometimes RTMFP stops working on my server, and I have to restart it for RTMFP to work again.Here is what I saw in the error log :
2011-04-29 05:43:17 26120 (i)2631502 The server rejected an invalid flow. -
2011-04-29 05:44:22 26120 (i)2641213 Connection rejected by server. Reason : [ Server.Reject ] : Adaptor: _defaultRoot_, VHost: TheFMSServer, App: Application/_definst_, (onConnect call
[code].....
Media Server :: Bundled Apache Stops Receiving Requests?
Jun 10, 2009I think I'm getting closer to the source of my problem.Let me outline my setup first (I'm using private IPs for example only). I have set two IP addresses to one network adaptor as follows:
CentOS 5.3 server running Apache 2.2.3 on eth0 with IP 192.168.0.78 <- working fine absolutely no problems at all
FMS 3.5.2 running Apache bundled with FMS on eth0:2 with IP 192.168.0.79
In fms.ini I have the following config:
ADAPTOR.HOSTPORT = 192.168.0.79:1935,80
HTTPPROXY.HOST = 192.168.0.79:8134
At (apparently) random times, the FMS Apache stops serving requests, but does not crash, and for some reason blocks requests to RTMP at the same time. Nothing appears in the log files which makes this even more tricky.I've run a test by shutting down apache as follows:
./httpd -f ./conf/httpd.conf -d "/opt/adobe/fms/Apache2.2" -k stop
and I expected RTMP to stop working aswell, however it continued serving up RTMP, which has led me to believe that something is then stalling the serving up of RTMP requests. This results in total downtime of all applications.
Media Server :: Fmsedge Stops Passing Traffic On :80 (not :1935)?
Jun 19, 2009I'm a systems administrator at an ISP running many FMS 3.5.1 instances for an array of clients. About half of these FMS 3.5.1s fall over dead after 2-3 weeks of runtime. Specifically, 'fmsedge' becomes unresponsive to http/rtmp tests on port 80; NOT on port 1935. The process appears to be doing work (cpu time is nonzero), and it answers the phone - I can connect to port 80. But I can't pass traffic to the daemon.
Logs give no indication anything's wrong. I can't strace or truss java with any legibility, due to fmsedge living atop a multithreaded virtualmachine.This occurs regularly, but does not occur on /every machine/; only about half of them. Where it happens, it's at 2-3 weeks after process launch.how to collect additional diagnostics, so that I can find what's breaking in fmsedge and either prevent it.I am running on CentOS 5.3 (like RHEL-5), 64-bit; I install nothing but Adobe FMS, and used Adobe's installer.
Media Server :: Proxying To HTTP Stops Working After A Few Hours
Jul 14, 2009I'm using FMS Streaming 3.5.0 r405 on linux servers to stream videos with RTMP/RTMPT. We have decided to use the new proxying function to redirect HTTP requests to a Web server. We did not install the included Apache server, but used a lighttpd server installed on the same machines and configured to listen on port 81. So when a client connects with our player, it tries first RTMP, RTMPT and if it times out on these attemps, we try to go through with HTTP. FMS proxies the HTTP request received on port 80 to the lighttpd server on port 81.
My fms.ini file contains: # Whether to start and stop the included HTTP server along# with FMS.#SERVER.HTTPD_ENABLED = false
# IP (address and) port that Flash Media Server should proxy# unknown HTTP requests to. Leave empty to disable proxying.# With no address, specifies a localhost port.# For example:# HTTPPROXY.HOST = webfarm.example.com:80#HTTPPROXY.HOST = :81
This works well, but after a few hours, the HTTP proxy of FMS does not work anymore. Lighttpd is still responding on port 81. There is no error in all log files. Just stops working! I have to restart FMS to enable again the tunnel. This behavior happens on all my streamers.
Media Server :: 3.5.3 Does Not Discard Clients, Streaming Stops Working?
Apr 29, 2010We have a FMS 3.5.3 running on a production server, a 2x quad-core Xeon E5345 CPU based hardware with Windows Server 2008 R2 64-bit OS.
The FMS service streams live streams to hundreds of simultaneous Adobe Flash Player 10 clients through RTMP at port 1935.ally with a higher number of simultaneous clients connected (around 1, one can see a rising number of clients of the loaded (single) application (never diminishing) through the Administration Console. It appears that the clients "linger" - i.e. the number only counts up, never down, from then on.
As if this was not sign of problems enough in itself, the bandwidth graph drops to near zero - i.e. it appears that streaming stops working too. Restarting application helps. The logs do not show anything UNTIL AFTER application is attempted unloaded via console. There are messages of various importance in the event log, among these the weird warning "Asynchronous I/O operation failed (Failed to attach to completion port: The parameter is incorrect. 87)." There is more too, which I can provide on demand.
The application is pretty rudimentary. Of the entire API, we only use Application, Client and SharedObject classes. There is a single persistent shared object, and that's it.
We are using a clean install. Only Microsoft supplied and FMS processes are running. Windows Firewall is on though, and has rules for letting in connections on ports 1935 and 1111. We need a stable server, and I have to restart it manually every day, sometimes twice in an hour, which frustrates me.
Media Server :: Video Chat With Flash Media Streaming Server
Dec 12, 2010is it possible to built a Video Chat without the need for server side code so that I can run it on a Flash Media Streaming Server?
View 7 RepliesMedia Server :: Duration Of Video Streaming Using Flash Media Server 3.5?
Feb 16, 2011Flash media server 3.5 to stream live video to a webpage with flex GUI embedded in it.For this I have used Adobe flash media server start screen .I could able to stream video correctly.I want to know how long it could be do like this.ie suppose I have to stream like this for 3 or 6 months
View 2 RepliesMedia Server :: Video Conferencing With Flash Media Server And Flex?
Nov 9, 2011what will be the best way for video conference without any delay for multiple users(200-300). How it can be possible with FMS and Flex?
View 3 RepliesMedia Server :: NetStream.play(streamName, -1); Plays Recorded Stream?
Sep 16, 2011NetStream.play(streamName, -1); This seems to be working wrong.if I have recorded an flv on server using FMS and FMLE with only audio with name "myaudio" and then after if I try to play a live stream using NetStream.play("myaudio", -1) then it plays the recorded stream. I believe that documentation says that it should start a live stream instead of playing recorded stream as the second argument is -1. Is this a bug in NetStream.play method?
View 3 RepliesMedia Server :: FMS 3.0 Stops Accepting Connections After 1-3 Days, Restart Required?
Oct 7, 2009We have a custom application that is running on FMS. Server is dedicated just for fms, there is only one application running on the server, with more instances, average traffic is 3-15 simultaneous users.The problem is,server suddenly stops accepting connections (after 1-3 days from restart), from this point it is impossible to connect to any instance, and fms server must be restarted.When the server crashes, the admin console can see all open instances, can close instances, can restart fms. There is nothing logged, that would explain this sudden failure.Second problem is, cores are connected and disconnected too often, causing client to reconnect (takes 2-5 seconds).
Hardware: 4 x quadcore Intel(R) Xeon(R) CPU E7440 @ 2.40GHz, 32 GB ram
OS: CentOS release 5.3 (Final), kernel: 2.6.18-128.4.1.el5
cpu and mem usage: 1-5% max[code]...........
Media Server :: 3.5.0 Stops Streaming Live Pre-recorded Streams Unexpectedly
Mar 1, 2010When broadcasting pre-recorded streams on a live applicationFMS always stops streaming at a certain time...
It can be after 10 seconds, it can be after 2 hours, or it can be after any other time, the frame just freezes on the client and the buffer drops to 0.
any attempt to diconnect / reconnect does not resume the streaming, althought the FMS console registers the connected client, no streaming is ensuing. One of the common events we get on the client in such instances when the streaming stops results in get "NetStream.Play.InsufficientBW".[code]...
Media Server :: Flvplayback Stops Playing But The Client Is Still Listed As A Connection In FMS 3.5
Apr 7, 2010I have a live streaming application using RTMP. Sometimes the playback works fine but sometimes it stops without any trace or errors in the log file, while still appearing as a connected client.
View 7 Replies