I want broadcast the television channel in the flash video component. It should be just like seeing TV channel in the internet. I have some knowledge in flash media server. I don't have knowledge to do this. First I want to know that, is it possible to broadcast television channel in the flash video components. If it is what are the software need to use or any other tutorial links.
View 1 Replies
I had a question about RED5 & Adobe... Does anyone know if it is possible to broadcast multiple video chats using Adobe flash player from "RED5 flash server"?
View 2 RepliesI am trying to broadcast live video using a webcam. I am using the developer version of FMS3.0. Actually i have a working code of webcam broadcasting, which i used before. But now i am using a free version of FMS3.0. When i tried to connect, the following error is showing:
"NC.onStatus> info.code: NetConnection.Connect.InvalidAppNC.onStatus> info.code: NetConnection.Connect.Closed"
I am trying to connect with [URL]
i have a orgin server and 2 edge servers and a load balancer
first off im confused in each edge server i set them to be remote, rtmp and changed the routeentry to <RouteEntry>*:*;96.44.***.***:1935</RouteEntry> on both servers
orgin server is just local
what my question is im streaming to orgin and its getting sent to 1 edge and other edge is doing nothing no traffic the stream i set it this way url:
'rtmp://173.254.***.***/live/live_test',
which is the 1 edge thats working if i setup another channel pointing to the other edge server ip adresss it doesnt work.. what am i doing wrong isnt all this supposed to be load balanced or am i missing steps...or did i do it wrong on the flash player config.
So I have a FMS 3.5, which I want to do live streams. The thing is I want several different people to be able to do the live broadcast, and I would like the server locked down at least a little and not allow anyone that wants to, to start a broadcast. With that said, I have FMS 3.5 installed, and I installed the Authentificaiton Add-In (3.0). I added a user to the authentification add-in, but it's still doesn't require a username / password, doesn't even prompt me.
View 4 RepliesI want to put protection on the server Because anyone can broadcast I want to put security on the broadcast only Not to receive sound and picture When you use any Flash Media Ankodr when the connection request requests a user name and password either, which does not have a user name and password can not broadcast sound and picture
I have a task before me that I have not spent any time researching in the past because I never thought I would have to do it... I need some specific advice from some of you gurus out there.I need to set up a training facility in which we film a teacher in HD and broadcast it live across the internet to 30 locations around town. I also need to have a live chat going with the video in which any of the viewers can ask a question to the teacher and he/she can answer it in the lecture being given.
The 30 locations that the viewers will be at will be a board room setting with an HDTV on the wall , and maybe a wireless keyboard and mouse that they can share to chat with the teacher.I know I can quickly figure out all of the video stuff, like lighting and cameras. I really need advice on all of the technical stuff that it takes for the live broadcast on the internet.
I imagine that I will choose a content delivery network, but which one? I imagine that I will use Flash Media Server, but which version? Do I need a real time transoding device to feed the analog HD video signals to to feed it to the computer? The company has T1, is it fast enough on the uploading to get what we need done?
I've successfully set up a media server and a live broadcast today. I embedded the swf file into my website and my friends are able to see my broadcast. But my broadcast is only 10M. And the streaming bit rate is 1700. So once the audience is bigger than 6, the broadcast starts to slow down. I've seen on the website that peer-based networking technology can significantly reduce the bandwidth for a single stream, so that the audience can be expanded. Is there any tutorial describing how to implement this? BTW, is there any free VOD/LIVE template available on the net? I would like to encorporate a vod system on my website.
View 1 RepliesTrying to output to multiple servers - tried launching multiple window of FMLE-but get an error message with the second broadcast attempt.
View 1 RepliesI am developing Video Chat over Ip (including audio and text too). But I am unable to get the proper startup material for my desktop application.
View 2 RepliesI have Windows and I have setup FME before with Justin.tv and UStream. But I do not like their layouts and lag. I only plan to stream to a few people, and I have my own personal home webserver. It's Windows XP and Xampp Bundle is installed. Is there any way I can broadcast to my home server? and if there's any way possible, to my website hosted by [URL]?
View 2 RepliesThis is showing up in my logs, and i have no idea what is causing it and can't find any more Dropping application (stream_app/_definst_) message. Clients not allowed to broadcast message. It doesn't happen very often, about once every 1 to 2 days.
View 1 RepliesHTTP broadcast delay is too long, I do a test in the LAN, send video using FME 3.2 the flow FMS4.5 server, use the sample folder under the videoplayer to play live video streams, using HTTP delay of 10 seconds or more,(RMTP play live rarely delay), who can tell me, how can I do this problem can solve the delay!
View 1 RepliesIt's possible to clean DVR record file without stopping broadcast to client?
View 7 RepliesI currently use FMS 4.5 to steam Live Technical Videos.
Hooked into Flash Media Live Encoder is a Roland VR-5 which lets me have multiple Camera switching.
I want to braodcast also a few live Audio only streams. I could easily use the VR-5 which in turn has a Behringer Audio Mixer attached to allow up to 16 Audio devices to be mixed in, and then just turn off the Video option in Flash Media Live Encoder but:
I don't want to have to put a video window on the Webpage. I just want an Audio controller.
So how can I use FlashMedia Server to just stream a live Audio feed?
I'm trying to troubleshoot a Flash Media Server working with a little video playback application I wrote a few years ago that has suddenly stopped working.I'm using CS3/Actionscript 3.My app uses the FLVPlayback Component, and was working well last time I checked. I recevied a report that the videos stopped working, and have been looking into it.I figured I'd add a bunch of event listeners to the FLVPlayback's ncMgr.netConnection so I could get debug info on things like io errors, net status, etc.The problem I'm running into is that the netConnection is null when I set it to anything on my Flash Media Server, and adding any event listeners to this netConnection throws errors.Here's what I've tried so far:
Playback of a local FLV file works fine.In the FLVPlayback documentation, I found an example and stole the URL of the stream they were using in the example, and that works fine, although it is an HTTP protocol stream rather than RTMP.Any attempt to access FLV files on my Media Server, which has worked fine in the past, basically cause the FLVPlayback object to sit and hang in "buffering" mode and never progresses beyond this point.The netConnection object in this case is null.Here's my code:[code]........
Again the purpose of this is to troubleshoot the video streaming from the Flash Media Server, and it seems like there is no netconnection to the server being created.Does this mean that the server is not working, or is there a problem with the way I'm trying to access the content on the server?This was all working fine before, and I have set up the server-side application .ASC files and such to allow things to work fine on the server end.
I'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
is it possible fast forward, rewind video in flash media server through flash action script ?
View 5 Replieswhen i try to live stream with FMS! I can stream video with Flash media live encoder to the server but when i create the player to recieve the livestream from server,i can not recieve the live stream,can anyone give me a step by step tutorial of how to do it?
View 1 Repliesi want to stream like a tv channel a list of files.
in this case i have 6 files: s1.flv - s2.flv - s3.flv - s4.flv - s5.flv - s6.flv
this videos are 1366 * 768 pixeles. this videos are about 15 seconds every one, they are short videos.every video are about 700 kb
in the server inside the application file i have an app name: test nd inside test i have streams/_definst_
[Code]...
is it possible to built a Video Chat without the need for server side code so that I can run it on a Flash Media Streaming Server?
View 7 RepliesFlash media server 3.5 to stream live video to a webpage with flex GUI embedded in it.For this I have used Adobe flash media server start screen .I could able to stream video correctly.I want to know how long it could be do like this.ie suppose I have to stream like this for 3 or 6 months
View 2 Replieswhat will be the best way for video conference without any delay for multiple users(200-300). How it can be possible with FMS and Flex?
View 3 RepliesAs titled, what is the way to record video/audio files using Flash Meida Server through rmtp, and allow users to access the recorded files through http?What I am trying to do, is to record a user's microphone's input and save it to the server.fterwards, I would like other users to be able to access the recorded files and mainuplating the audio data, by computeSpectrum(), to do some visualization of the audio. As I know computeSpectrum() cannot work on streaming files, so I think I need to access the recorded files using http instead of rmtp. Is that true?
View 1 RepliesI want to have a website where users can record short video clips (using a webcam) and then have those videos saved on the FMS for viewing later. I've seen a lot about streaming video, but I actually want to save the video.
View 1 RepliesHow can i connect to my own server to watch my streaming video from another computer?
View 10 Repliesi'm wanting to stream video or even just load it into my flash sites and not lag them....anyway i have had a few people tell me to look at flash media server and flash comm server. i have but i am really confused with it all...WHERE DO I START?? WHAT TO KNOW?? HOW TO DO IT??? etc
View 2 RepliesIs it possible to broadcast a live video stream from my PC to my website and have it appear in a flash player?
View 4 RepliesIs there a way to get video thumbnails from Flash Media Interactive Server (FMIS) without using client side action script. Bascially we want that we dont have dependency on Flash for displaying thumbnails from FMS but when a user clicks on one of thumnails then Adobe Player streams that video from FMIS.
View 2 Repliesi'm having problems trying to play FLV videos on demand from Flash Media Server 3.0.1.
Sometimes the video doesn't show at all, sometimes it plays the audio only, and sometimes it works perfectly...i can't figure out why.
Videos are into the applications/vod/media folder, i'm using a MediaDisplay object to load them, and i've exported the SWF as a Flash Player 7 AS2 application.
Code: Select all // m is the mediadisplay object
m.setBufferTime(10);
// file will be passed as parameter
[Code]....
as you see, the server is in my local network, but i've tried with a public remote server too, with the same results.
