I installed said program but whenever I add users, it says they were added successfully and exist in CMD.However when I check the users.dat file it is empty. When I try Live Encoder it says the user does not exist.
View 10 RepliesAs titled, what is the way to record video/audio files using Flash Meida Server through rmtp, and allow users to access the recorded files through http?What I am trying to do, is to record a user's microphone's input and save it to the server.fterwards, I would like other users to be able to access the recorded files and mainuplating the audio data, by computeSpectrum(), to do some visualization of the audio. As I know computeSpectrum() cannot work on streaming files, so I think I need to access the recorded files using http instead of rmtp. Is that true?
View 1 RepliesApply the security patch found here:http:[url]............For more information see the followingresource:CVE: 2009-1365
View 1 RepliesI'm usig Adobe Flash Media Streaming Server 3.0.1, it works fine, no major problems, when the internet between Media Encoder and Server stops, some times the stream doesn't start automatically.I have a problem with users(viewers) trying to connect to server. The server is connected to fiber optic internet at 100mbps and the stream is made in 500kbps with media encoder 2.5.
When are 40-50 simultaneous viewers works fine, but when enter more viewers, for example, 200 simultaneous, nobody cam receive the stream good, it works frame by frame or flash player display "buffering", work 3 seconds and buffer 5 sec,and so on.HOW I CAN RESOLVE THIS PROBLEM?it is possible to connect milions of users simultaneous, how can i do that.I need more servers to connect each to each other? Could you send me a diagram how to do that?I need to increase the ram memory from server?( i have P4 dual core 3.0 Ghz, 6 Gb ram 800Mhz).
Is there any way to check which version of flash media server is installed on my computer?
View 5 RepliesIf I have a Quad-core server and 8 RAM, how many users can it handle while streaming a 48-128Kbps audio-only stream of Mp3 or AAC? I guess there are some users here that are handling similiar cases, and maybe employees with estimates
View 2 RepliesI am working on flash chat in AS3,i need to count the users in each room.
View 3 RepliesI do noticed that any user who have the ip address of my FMS can do connect and stream to the server although there is no user for him and the server listens to the stream already and it appears in the active streams. How can I prevent that and only allow authorized users by my to connect to FMS and prevent all other from using it ?
View 7 RepliesWith the following recommended spec from Adobe website, how many concurrent users ? Flash Media Streaming Server system requirements OS : Windows Server 2003 SP2 or Windows 2008
H/W Requirements
- 3.2GHz Intel Pentium 4 Processor (dual Intel Xeon or faster recommended)
- 2GB RAM ( 4GB recommended)
- 1Gb Ethernet card
I need to protect my FMS, so that only me (my Username, or IP if its not possible) can start a live stream. I have been reading the pdf on plugin for developers, and i read that the authorization plugin can do this, but it is C++ and i dont know nothing about that, i can understand a little bit, but i do not know how to make the dll i want. Is there another way to do this, the server requests a user and password when i want to stream.
View 10 Repliesi have made a chat app and i want to let the user add another users that he can find by searching the database of users to his own list, and grouping them ,,, this is can be done but ,,, now in my app when the user connect to the lobby he get all the online connected users in his list i mean when connecting to the online user list sharedobject the user list contains all the connected clients to the lobby and if the number of the connected users is by hundreds or thousands i think
if i create a loop for updating the own user users list statues it would not be good idea,,,
so what is the best way to let the user build his own users list and get the statues of each user in his list from the application online users sharedObject witch connected to the lobby app
Uses can log into my site and record camera videos to FMS, and now I want to present videos that belongs to a specific user in a classfied way,that is: videos those are being recordedvideos those have already been recorded, how to do this with FMS? I'm thinking of doing this by storing such information into the database with server side as,using onConnect and onDisconnect,but that's not the most stable way IMO, I don't know whether FMS has a native support for this kind of job...
View 11 RepliesI'm building a chat app and there are between 100 and 900 users inside. I'm checking if a user is connected to the FMS by pinging it and if the stats['ping_rtt'] is higher that 3 secs i disconnect the user. The problem is that some user are connected but have very high ping like 30 secs or even higher.Does anyone have an idea what can be the reason for the high ping?
[Code]...
I will deliver the following technical information on the server:
-Dedicated server:
Connection bandwidth: 100 Mbps Unlimited transfer limit
RAM: 512MB RAM Intel Atom 1.60 mono
System: CENTOS 5.5 FMS
Version: Interactive 4.0
We will send a stream of quality 800kbps
I have changed the variable <MaxConnectionRate>2</MaxConnectionRate> base on the URL - "Limit connection requests",but more than 2 client can connect to the server.
Is that other settings to config to restrict the number of simultaneous users?
[URL]
I'm pretty new to Flash VOD, exploring using a FMIS as a substitute for an existing vbrick systems' server. One thing that I'll need to do is authenticate users against an LDAP directory. Basically, the implementation will need to embed a Flash media player in a web page, the page also sets the server URI and stream name for the player. The player would need to ask the user for a username/password, and the server would need to make some determination about whether the user is authorized to receive the specified stream.
The advertising on Adobe's site for FMIS talks about LDAP, but on closer inspection it seems as though there's no real LDAP implementation. Instead, it seems as though there's a framework that allows for the development of an LDAP service. Is this the correct understanding? and if so, are there are any third-party plugins available commercially to handle LDAP? And if there aren't any commercial products, are there are any good resources for getting started developing one?
[Code]...
I have more sites, sites have some users, and each user has separate application folder
What I want is put application folder in a defined folder like following
C:FMISsiteAapplicationsuser1
C:FMISsiteAapplicationsuser2
C:FMISsiteBapplicationsuser1
C:FMISsiteBapplicationsuser2
etc...
I think for this I need to create virtual hosts.
we're planning to set up a live streaming service, one operson live streaming a video to multiple users. so no more than one channels contemporary in uplaod, and at the beginning it won't be a open broadcast service (maybe later..) we initially don't know how many can be the users. I've red that there's no theoretically limit for the maximum number of users connected with a fms, is this also valid for live streaming, or has it some limitation due to be live? is it necessary to have our fms, or is it possible (and cheaper) use a server provider?
View 1 RepliesWe've just installed Flash Media Server 4 to host video for a new client. We've gotten it to serve up video to the public and ourselves (inside our own network), but the problem is our client cannot view the videos. They keep getting a "can't connect to the network" message.Does anyone know of how we should troubleshoot this? The videos are each about 90 minutes long, and for right now, there are six of them, which is why we wanted to stream instead of embedding them.
View 4 RepliesWe need to develop a flash voice conference application with using flash media server. The number of connections can be up to 20,000. is it possible with flash media server. Can it also possible with Peer to Peer. If we use flash media server what configuration needed for.
View 2 RepliesNot talking video here. Talking interactive apps, like chat. Ours crashes at about 500 connected users. When I report this I'm told "make sure you're not creating too many objects serverside" or "increase the JSRuntimeSize setting in your application.xml file to the max". Have now done both of those things but still get this out of memory error. Let's say I optomized my app and got 100% more connection capacity. That would be 1,000 connected users - still nowhere near enough. Are my dreams of 6,000 or 10,000 connected users enjoying all of the fruits of the FMS interactivity pipe dreams?Is it not meant for sessions of that size?
View 3 Repliesworking on a text Chat application with FMS4 "RTMFP" connection and i am looking a functionality to send direct message to one to another peer
View 6 Repliesi am currently playing around with a flash media server trial in combination with the flowplayer.All in all i am testing the performance and general functionality for the company i work for.Anyways, i am trying to search a way to check the bandwidth of a client ( server sided ) and redirecting him to the right video stream.Sure this could be done by the backend flash application, but its out intention to perform this check server sided.
View 4 RepliesI have a silly question, how do you verify if your install of FMIS needs updating or security patches?I currently have FMIS ver 3.5.3 r824a.How the heck do you even verify if Adobe has a higher version? FMIS page just says FMIS 3.5
Sheesh, can Adobe make anything straight-forward?IT dept where I work says one of their security scans implied - that the FMIS install on one of our servers needs updates, what updates, who knows...
I have developed a audio/video/text chat application with multiple users. I would like to store/save live session in to a single video so that we can manage archived live sessions, and make these sessions available for other users just like a normal video/FLV.
I know we can store single live streaming with DVR but I need to store all the live cams into single video. Note: I'm using FMIS for above application (with rtmp).
I'm trying to find out how I can tell how many users are connected to the same FMS application in a flex application:
public function totalConnectedUsers():void{
lblText1.text = "There are a total of " + bindableUserVariable + " Users Connected to the Stream Now";
}
I'm developing Text Chat App with FMS 4, Flex 4.6. I want to count how many users in. I've searched enough. And I made some codes. Server Side Code(main.asc)
[Code]...
i am trying to develop a multiplayer game using the flash media server. Currently i can get multiple users to control one shared object but i need to have 2 users controlling seperate shared objects on the same stage.
[Code]...
What is best way to set up my application. I currently have a working app but the work flow doesn't feel right at all. Here are the basic steps involved:
[Code]...
i'm working on simple videoconference app with fms 4.5 for developers. Version without p2p works fine, but now i'm trying to enable p2p feature. How can i share the nearID of connected client to other users without external tools?
View 2 Replies