Media Server :: Lower Latency Via The Client?
Sep 29, 2009Is a latency of 94 - 109 high or low....if its high how do I lower it via the client I don't have control over the server at this point in time.
View 2 Replies
Similar Posts:
Java :: Verify Contribution Of Client-server Network Latency In Application Performance
Sep 24, 2011We have a typical Flash+J2EE application that makes multiple requests from client to server (over Flex remoting), which is taking quite a long time on some client systems (and hence results in poor application performance on such systems).
Now, suspecting issues with network connectivity (latency) on such client system(s), we need to identify how far does it contribute to the slow response of the application (rather than performance issues in the application itself).
So, what are the best way(s) to diagnose this on a client system (Windows)?
Note that we have tried profiling our application, which does not indicate bottlenecks there, so we just need to clearly identify the possible network issues.
Media Server :: Settings For Audio Latency
Oct 21, 2010I can't find the setttings for have a least latency as possible, either the video quality is bad or the latency is up than 5 secondes...What should i do?
[Code]...
Media Server :: Video Delay Continuously Increasing Latency?
Jun 3, 2010I'v made an application with all the default codec and settings provided by adobe to publish live video using FMS. I've made two swfs one is for publishing live video and the other is for viewing the published stream (telecast). When I'm publishing the live video on My laptop using the default web Cam and mic attached to the Dell laptop then after 2- 3 minutes delay on the telecast side start increasing and it keep on increasing continuously .At the same time when I use my desktop PC by attaching external Web Cam and mic to publish, delay on my Telecast side is consistent ,it never increase. I found the problem is with the Laptop's mic. Can anybody please suggest me why it is happening, and is there any solution to it.
View 4 RepliesMedia Server :: Reduce Audio And Video Latency In Flash?
Sep 22, 2010We have one functionality in which one user can communicate with the other user at the same time through flash media server3.5. In this fucnitonality we are catching stream from both end through camera and pass it to flash media server. On FMS side this streams gets stored also we are displaying those recorded flv files side by side to the corresponding user so that they can communicate with each other. In this situation we are facing a video and audio latency upto 1.5 to 2 sec.
View 2 RepliesMedia Server :: Find Client Disconnected When Client Lost Net Connection?
Oct 27, 2010how can I find on fms server that client disconnected if if client disconnected due to power cut off. I client manually close the application then onDisconnect on server is called but if due to power cut off it does not called.
View 1 RepliesMedia Server :: Live Video/audio Chat Application - Latency Time Using FMS 3.5 And FLEX
Dec 9, 2010I've build a live video/audio chat application. All works fine only the issue is latency of 5 secs. I'm using FMS 3.5 and FLEX.
View 1 RepliesMedia Server :: Client-server Media Relay Using RTMFP In FMS 4
Sep 23, 2010I am trying to make clients to connect FMS4 server over RTMFP for my video conferencing application.It is basically a client-server media relay application in which clients with webcam/mic connect the server and the server relays video/audio data to other clients. This application is working perfectly with FMS 3.0 but it was RTMP rather than RTMFP - I simply replaced 'RTMP' with 'RTMFP' in netConnetion and tried to test in Flash Media Development Server 4.0, but it is failed to make a connection from a client - it was working after replacing it back with 'RTMP' of course.
I believe server-client media relay is possibe using RTMFP in FMS4 because Adobe said:"Although RTMFP is often used for peer-assisted networking applications, you can use RTMFP in unicast, broadcast, and multi-point publishing applications as well. Simply replace the RTMP protocol in the NetConnection.connect() call with the RTMFP protocol:" in url...
Media Server :: Setup Stream Encoder>>Flash Media Server>>Flash Player Client?
Jan 2, 2011I am trying to create a flash player to stream an on online Internet radio station using FMS. I chose FMS after being told that I need RTMP server to extract the metadata. Our radio audio is being encoded using a DJ interface called SAM Broadcaster. But for some reason, it does not have an option to send over the stream directly to a Flash Media Server. Only options are either IceCAST or ShoutCAST. How should i setup the stream? Should it be Stream encoder>> IceCAST/SHOUTCast Server>>Flash Media Server>>Flash Player Client. Or should I setup Stream Encoder>>Flash Media Server>>Flash Player Client? Shouldn't Flash Media Server be an alternative to IceCast or Shoutcast? If that is the case, how do I send over the stream from SAM Broadcaster directly to Flash Media Server without restreaming through another streaming server?
View 2 RepliesMedia Server :: Make In FMS Files(xml Files) In Order To Reduce The Latency
Sep 8, 2009iam streaming my web cam to FMS .... i have got a latency of 1 -2 second,,,,,, What should i do to reduce the latency,,,,,, is ter any change i can make in FMS files(xml files) in order to reduce the latency......
View 6 RepliesMedia Server :: Latency Is Coming In Fms4 Peer To Peer Communication
Nov 17, 2010I am developing peer to peer video conference application with FMS4 but there is some latency problem.
View 1 RepliesMedia Server :: Latency Coming On One Side In Peer To Peer Connection?
Dec 22, 2010We developed one video chat application in which one user can chat communicate with anohter user. Latency is coming on one side in peer to peer connection.
View 2 RepliesMedia Server :: Client Returns Server Not Found:rtmp://192.168.10.1:/live When Accessed From Another Pc?
Jun 29, 2010i have a small LAN of about 8 computers all of which are running windows 7. I have installed FMS and XAMPP webserver on one of the machines. I want to stream live from one PC to all the other PCs on the LAN. I have a webpage with jwplayer embedded in it on my XAMPP webserver that is able to see the live stream when i start it locally. I mean the live stream works fine on the machine with the servers on it. But when i want to view the live stream from another machine in the LAN by accessing the webpage that has the jwpalyer from another machine, The jwplayer returns "server not found:rtmp://192.168.10.1/live" error. I was thinking that maybe a firewall is blocking the 1935 port but i have turned off the firewall of every PC on the LAN. I have unistalled any antivirus program on all the PCs. But i still get the same error when i try to access the live stream from another PC on the LAN.When i run netstat -a -n|find ":1935" i get 192.168.10.2:49184 192.168.10.1:1935 SYN_SENT and i think the request for the stream is sent but the conection is rejected.
This is the code for the webpage with jwplayer embedded in it. maybe it:
<html>head> <title>JW FLV Media Player</title> <script type="text/JavaScript" src="swfobject.js"></script>
[code].....
Media Server :: Use RTMP Over HTTP - Outside Client Gets The Internal IP Address Of The FMS Server?
Jan 8, 2010i am new on steaming & flash server; when we try to use RTMP over HTTP the outside client gets the internal IP address of the FMS server instead of the NAT one or public IP address, how can we solve this.
View 1 RepliesMedia Server :: Sending Information From Server-side Script To Client?
Apr 18, 2010I have created a script for an Adobe FMS application to broadcast a playlist of video files as a live stream. (internet tv)
I am now working on a custom Flash-based video player to play my stream.
How do I send information from my server-side FMS application (main.asc) to the client-side video player? (e.g: title, duration of current video player)
Media Server :: Dynamic Stream Switching From Server (not Client) Side
Sep 6, 2010I understand how clients use bandwidth detection etc to dynamically switch streams via client calls with ns.play2( ... ), but I was wondering if it's possible to only ever use 1 initial ns.play( ... ) call on the client side, but let FMS server side logic that I write dictate which client sees what content. For example, I have 3 clients connected to my FMS server, all watching a live stream. I then decide I want clientA to see 'recordedMovieA.flv', clientB to continue seeing the live stream, and clientC to watch 'recordedMovieB.flv'.
[Code]...
Media Server :: Check The Bandwidth Of A Client ( Server Sided ) And Redirecting Him To The Right Video Stream?
Apr 7, 2010i am currently playing around with a flash media server trial in combination with the flowplayer.All in all i am testing the performance and general functionality for the company i work for.Anyways, i am trying to search a way to check the bandwidth of a client ( server sided ) and redirecting him to the right video stream.Sure this could be done by the backend flash application, but its out intention to perform this check server sided.
View 4 RepliesAs3 :: Media Server :: Limit Server Recorded Netstream Length To 10 Seconds At Client Side
Sep 19, 2010I want to limit server recorded netstream length to 10 secs at client side using as3. How can I do that?
View 2 RepliesMedia Server :: Call Methods Form Server To Client?
Apr 28, 2010I m working in flex3.0 and i just want to know that how can i call a function from fms server to my AS3.0 (Client Side) code.i tried the syntax client.call(methodname,null,null); but my flex code throw exception unable to call the method.here can i use clientobject.call (methodname,null,null) and is there some special way to declare that method at client side.
View 3 RepliesMedia Server :: Setup Of Client And Server For Live Webcam?
Oct 9, 2011No I have installed fms4.5, but I can't find good docs how to set something like this up. In Learning section I saw a lesson, but this one isn't ready.So I want to publish using flash and the subscribers to the livestream can be iPhones or Browsers.
View 13 RepliesMedia Server :: Latency Time - Guilty Or Not Guilty
Mar 17, 2010Apparently I seem to have upset one of the forum members by cluttering up his space with rantings about FMS not being up to speed or scratch or whatever. So i'll keep it simple. Since i'm not inexperienced in the deployment of Flash via a streaming provider, I just want to know if other users here, find the FMS software to be brilliant in concept and delivery. In other words are the streaming companies going to be worried that my 1000mb of date transfer per month are going to stream just as well as the $360 a month they would like to charge me for doing the same job?!
[Code]....
Media Server :: How To Load A .swf Into All Client
Nov 30, 2009I have to load a .swf file in all connected clients by pushing a button from another client
View 23 RepliesMedia Server :: Call A Particular Client Through FMS?
May 5, 2010How to call a particular client from fms.Actually i m making a private chat application in which text messg send from one client to another specific client through FMS.So i m confused how gms recognize a particular clients.I am avoiding application .client[] array that contains all the connected users references.becoz it changes at the time of connection and disconnection of client from fms.
View 2 RepliesMedia Server :: How To Know Client Is Disconnected
Oct 27, 2010There is a big problem in which i stuck .how to know that client has been disconnected if client pulls of cable or manuallu disconnect netconnection.
View 1 RepliesMedia Server :: 2.0.5 Client Disconnection
Mar 24, 20091. The basic problem I would like to solve is detecting when a connection to the Flash Media Server fails.Our client-side application establishes a persistent NetConnection and publishes a number of video/audio streams to the FMS.After publishing some videos, some clients find that recording no longer works. I need to add code to let them know that there's a connection problem. I've studied the NetConnection class and can't find an built-in method that can help alert the user if the connection is broken.
2. Also, I'm having trouble tracking these events in the FMS logs. Are there any key statements I should look for that would tell me if the FMS has experienced a sudden loss of connectivity with a client?I was thinking of using the onAppShutdown (?) event to detect when an application closes normally, so I can then get an idea of when it's closed down in other circumstances.
Media Server :: FMS - How To Authenticate Client Using LDAP
Mar 6, 2009How can do I authenticate the client using an LDAP server?
View 6 RepliesMedia Server :: Playback Logs From FMS From A Client?
Jun 11, 2009I found some stuff in an old FMS book (great book on FMS but very old) on how to subscribing to the Log streams. The does a netConnect & NetStream and used a nc,onLog to get play back but onLog does not seem to be supported anymore. how I can playback logs from FMS 3.x into CS3 client?
View 1 RepliesMedia Server :: Calling Client Methods From (FMS 3.5)?
Jul 10, 2009- Flash Media Server 3.5 (using ActionScript 3 for server-side code)
- Flex application (built in Flex Builder 3, using ActionScript 3)
Now, I'm trying to get the server-side ASC code to call something from a connected client. It doesn't seem to work (thought everything else works beautifully). I've tried stuff like the following in the server side:
- In the application.onConnect function, I've tried this:
...
currentClient.requestChat = function (reqID, destID){ trace("Requesting chat..."); currentClient.call("requestWaiting", new reqHandler(), reqID, destID);};
...
(Where reqHandler is just some handler that I know gets called).
- I've also tried the following code outside the onConnect function:
Client.prototype.requestChat = function (reqID, destID){ trace("Requesting chat..."); this.call("requestWaiting", new reqHandler(), reqID, destID);}
Both seem to fire appropriately (when triggered from another client). However, the "requestWaiting" method call to the clients doesn't seem to work at all. I've tried some AS 2 examples on the client side, like:
nc = new NetConnection(); nc.client = new Object();
// function for handling queueing of requests for this station nc.client.requestWaiting = function (reqID:String, destID:String):void { trace("HELLO"); // check to make sure this is the right location, and if so, queue it if (destID == "WhateverTheIDIs") { chatQueue.push(reqID); btnChatWaiting.visible = true; } // if }
...but that doesn't seem to fire at all. I know the Flex has "sealed" the NetConnection class itself, so I can't just "extend" it as I do the "client" property.I've als tried some more AS 3-oriented stuff, like trying to make the "client" property reference a separate class that handles callbacks, but that doesn't work easily for me as I need access to properties in the class that contains the NetConnection.
Media Server :: Record Client Pc's Sound?
Sep 11, 2009i know the way to capture the mic's sound,My idea is to make an application to record songs palyed by other app,like Windows Media Player,Yes, Just capture from the soundcard,
View 3 RepliesMedia Server :: How Does A Client Receive Streams
Jan 15, 2010Do i need a wireless connection from the server. I am thinking of installing an access point to test the server.. The only challenge is i dont know how to get the client to receive streams.
View 7 Replies