stop()
var home_req:URLRequest = new URLRequest("home.html");
function home(event:MouseEvent):void[code].....
I created this flash intro (CS3) and after this flash intro, I want the home page to come up. It's not doing it. What am I doing wrong in this code? I want it to open in the same page.After my into, it's just a blank web page.
I developed a flash/as3 animation recently which used a couple of timers. I devved on a mac and then transferred the fla to a pc. When I output the swf from the pc it acted different.The timers were much faster
View 0 Repliesi've been playing around with this dynamic ribbon effect for some days now. It was made in Actionscript 2.0 for Flashplayer 6, now i need to change the Flashplayer to 8, because i made some other scripts which needs the new features in the new player.
But for some reason the animation is acting strange when i change the player. It is like it misses out just a tiny bit of the code, or some function. It is acting like it is stuck in the upper left corner all the time.
[code]....
I developed a flash/as3 animation recently which used a couple of timers. I devved on a mac and then transferred the fla to a pc. When I output the swf from the pc it acted different. The timers were much faster. Has anyone seen this before?
View 1 Repliesave anyone run into a SWF acting differently when loaded in IE8? I just finished a banner/header for a client that is working perfectly except when loaded in IE8, here is what is happening...
[URL]
Basically my masks are not being loaded on init()... I'm loading external XML so I'm thinking it might have something to do with that.
I have a movieclip that is acting like a button. I cannot seem to target the movieclip.Here's my path:THIS DOES NOT WORK!
ActionScript Code:
var tb = toolBar;
tb.stateViewBTN.onPress = function() {
[code].....
I am trying to create a very basic slide show of images that automatically revolves every 4 seconds. everything works fine but for a short time. After 2 cycles the images start to show up out of order, in less than 4 seconds and single images may repeat instead of playing the next image.
View 1 RepliesI have a parent Sprite A, that I add a Label component and aList component to. The Label is placed directly above the Listinside of Sprite A. No matter how I change the width of the Labeland the List, Sprite A always reports a width of 115. How can I fixthis so that it reports the actual width?
View 10 RepliesHow would you make a button event call a function which acts like a backspace keyboard event delete.I tried faking the dispatch keyboard event "keyup" "keydown" with keycode 8 and keynumber 8 without success.No other way than doing it by hand with begin and end select index plus substr ?I have a textinput i just want to add a button acting like a backspace.
View 2 RepliesReference objects on stage/frame from document class. AddFrameScript seems to do what I need it to, except for one thing. In the function I'm passing to be added as a frame script, I want to dynamically create some event listeners for buttons, but variables I want closed over the listener functions aren't behaving as expected -- they all end up having the last assigned value of the variable rather than the value it had when the function was defined, as if different scope rules are in effect than normal:
addFrameScript(node_frame - 1,
function() {
stop();
question_txt.text = node_question;
answers_xml = node_xml.answer;
[Code] .....
But then afterward, if I click any of the three buttons, they all trace:
3A
Do frame scripts observe different (dynamic rather than lexical?) scoping or something?
i have an odd issue and i know almost nothing about AS3 so im a complete noob please bare with me. I am working with a template .fla for a page flip but i am using a different navigation system for the flipping of the pages. I have worked through all the errors and output problems and i can get the system to work but the moment i try to use other event handlers for the same item it completely blows up the main script to make the page flip that is required. No errors, output problems etc, it just doesn't work. So here is the code.
Code: Select allHome.lnk1.addEventListener(MouseEvent.CLICK, clickHandler, false, 0, true);
function clickHandler(e:MouseEvent):void {
switch(e.currentTarget)
[code].....
I have 4 mc's that are acting as btns inside an mc on the main timeline
code is below
newolivefour_mc.buttonMode=truenewolivefour_mc.addEventListener(MouseEvent.ROLL_OVER,buttonOverfour);newolivefour_mc.addEventListener(MouseEvent.ROLL_OUT,buttonOutfour);function
[code].....
This must be a very basic question, but I'm lost on it.The premise is simple. OnRollOver button 'A' gets color 'X', onRollOut button 'A' gets color 'Y', onRelease button 'A' gets color 'Z'.Now, ofcourse, when a button gets pressed, it gets a highlight color. But as soon as the user rolls out, the onRollOut part kicks in a changes the color back to 'Y', while it should remain at 'Z' as long as no other button is clicked.This is a very basic problem, but I'm still asking. Is there a way to solve this easily? Do I need to start using booleans and if statements to fix this?
View 9 RepliesI have an image which i am attaching, it is the white portion of the image( i saved it on a black background so it is easy to see, but it is on a transparent background saved as a gif and imported to flash). When my for loop runs, i am trying to position this image on stage programatically, but it seems as it is not doing it right. It scales the image, and positions some all over the place.I wanted the images (8 of them) to appear in 2 colums each one spaced out evenly, but it fails to do that. The movie clip holds the image below. Also since it is a irregular shape, it seems to make the edges look really rought.
1) Why is the for loop generating these images all over the place like that?
2) Would it be more ideal to draw this shape with flash, rather then using a gif image? Is such a shape even possible to draw?This is the code:
import fl.transitions.*;import fl.transitions.easing.*;import flash.events.TimerEvent;
var imageLoader:Loader;
var xmlData:XML;[CODE]............
I have a deeply nested movie clip acting as a button, and I have been having trouble using actionscript to control another nested movie clip in another portion of the document.I've tried ways like:[code]...but both throw errors at me and won't let me change the frame of the IndexText MC.[code]
View 12 RepliesI have a MC(image) in the center of my screen, and have two buttons, one on right and one on left side of that MC. I want to scroll (image is like a menu) that MC left or right on mouse events, down or over. So, I just want to change MCs X value while holding mouse button on buttons or just hovering over them. I have managed to do that, but it's only moving by one value I have entered after a mouse event. Here's a piece of code I did.
buttonL1_btn.addEventListener(MouseEvent.MOUSE_OVER, buttonL1Pressed);
function buttonL1Pressed(event:MouseEvent):void{
var temp:int = 0;
var temp1:int = 0;
[Code]....
I'm attaching as many instances of a MC as my xml child nodes length.So basically never know how many of them would be on the stage.Each MC receive actions to perform, nothing fancy and it basically works.But what I want to do is to know when the user has clicked once on any mc so this latter gets 'not enabled' until another MC instance gets clicked. (so my previous MC instance gets enabled, it acts like radio buttons )The point is I know how to do it when the total of instances is defined.I also know the basics of a loop , but I cannot figure how to set up a "toggle" to gets this 'radio button group behaviour
View 2 RepliesI am trying to change the position of a movie clip which is acting as a menu and loading other swfs onto the stage. The problem is, is that the movie clip is also animated and when an swf is loaded the movie clip appears underneath the loaded swf. What method I should use to change the hierarchy of this movieclip.
View 2 RepliesI have this weird thing happening with flash and a dynamic textfield. Basically, someone rolls over a marker on a map, and a tooltip pops up with a dynamic textfield. The textfield is set to multiline=true and wordwrap = true, and I defined a specific width of 160 pixels.
The problem is, some of my text is jumping to the next line, some of it is just getting cut off. So if I have a line like "The Cat Jumped Over the Box", On one line I will see "The Cat Jumped" and on the next line I would see "the Box". It looks like it is masking out the "over" line and not pushing it to the next line.
It's not doing this for everything, just some longer lines. This is a really weird bug and I have tried for 8 hours to get this fixed. Has anyone ran into this problem before?
I have a couple of dialog screens made from FlxGroups. The first screen, LandingScreen has a button that opens a second screen, CargoShop. Whenever a screen is added, it is made the active screen in my FlxState, and the other screens' buttons are set to active = false; So, when the button to open the CargoShop screen is clicked, it is set to active = false; at the next update cycle.
Now, the CargoShop screen has a button to close it, which makes the LandingScreen active again. For some reason, as soon as the CargoShop screen is closed, a new one is instantly opened as if the shop button had been clicked again.
These buttons are not on top of each other. Is there some trick I'm missing with FlxButton that is thinks it's clicked when it's not? It only happens when I use the mouse; if I close the CargoScreen with a keyboard command, a new one is not instantly created.
i have couple of videos that i want to play in succession. my theory on how to do this was to add an event listener that would call function to change the source of the FLVPlayback component and play once the initial video finished playing. The problem is that i don't know what parameters to pass to the eventlistener and the acting function. I just need someone to fill in the blanks to the following code
[Code]....
why the getDefinitionByName function works with "com.foo.Bar" and gives error with "com.foo.Rab"?My only clue is that the class com.foo.Bar was created before importing the project to Flash Builder 4.5 for PHP (4.5.1 namely).
My question is very specific, in fact you could try for yourself if you had FB4.5.1, a prior version of the same program, and a lot of time. Obviously I'm hoping to find someone who have experienced this particular issue or any related issue with similar functions.
i'm using a XML file fromwhich i load thumbnails and images into Photo Gallery.[code]The problem is all thumbnails acting as buttons even the empty thumb which hasn't image_path in XML?!
View 5 Repliesexplain this...
var i:Number = 7059467160524343000;
trace(i);
i = 7059467160524343700;
trace(i);
i = 7059467160524343999;
[Code]...
how to make text acting as a preloader so that its color changes as preloader percentage. i dont mean how to apply the math, i mean how to mask it or whatever action to achieve that effect?
like for example imagine the red is constantly growing to the right letter by letter (actually pixel by pixel:
So I'm creating this flash game for our company's 2010 halloween greeting card and I'm having some problems.All it is an swf that has balloons randomly moving upward.Each balloon is a movie clip that has another "button" movie clip inside of it. As you click on each balloon, the balloon pops and then recreates itself. The only problem is that the button inside the balloon is not acting like a button the entire time.
The upward movement is being called through an enterFrame event listener and the use of the button goes in and out as the balloon moves upward. It's a pain because you have to click the balloon multiple times in order to get the balloon to pop. Does anyone know why this is or if there is an alternative to enterFrame?
Here is the problem:
var p:int = 0;
var n:Number = 0;
n = 32.999999999999999;
p = Math.floor(n);
trace(p); // returns 33
n = 32.11111111111111;
p = Math.floor(n);
trace(p); // returns 32
I would expect both of these to return 32. I have searched, and it seems this is an unreported bug in AS3. Or ... am I doing something wrong?
I have created a swf (image1.swf) that has 2 "tweens" in it with a "stop" action at frame 20. I loaded the swf file correctly (into the current swf file "document 1") and it works the way I want it to by running and stopping at frame 20, code: on (release) {loadMovieNum("image1.swf",30);} The question I have is, is it possible to hit a button in my current swf file "document 1" and have it jump to a specific frame and play in my other swf file for instance jump to frame 21 and play to frame 40 in the image 1.swf. file?
View 3 RepliesI have two png's that kind of look like paint brush strokes. they have some transparency in them that lets the stage colour bleed through a bit.
I am adding two of these images to the stage in AS 3. One adds quite fine - looks as expected. The second one however doesn't have any transparency other than around its edges. What i mean is it looks more like GIF than a PNG. Rough around the edges, no transparency "inside" the image itself (where there should be)
i have tried re-creating the image (yes it IS a PNG) which did nothing. I ensured the library item is not being treated as a JPEG. I also even tried externally calling the PNG to see if that made a difference. Unfortunately it did not.
why this second PNG doesn't seem to have a transparency set?
I've got a slide show going on and the client wants it when it reaches the final slide, the next click of the right arrow button takes you to a URL. Thought I had it down in an if statement but it's not working.
var slides:Array=[slide1_mc,slide2_mc,slide3_mc,slide4_mc,slide5_mc, slide6_mc,slide7_mc,slide8_mc,slide9_mc,slide10_mc ,slide11_mc,slide12_mc,slide13_mc,slide14_mc,slide 15_mc,slide16_mc,slide17_mc,slide18_mc,slide19_mc, slide20_mc,slide21_mc,slide22_mc,slide23_mc,slide2 4_mc];[code].........