I have an iPhone4 plugged in via usb.I an create ipa files and put them on the phone using iTunes.I would like to be able to use the test/debug on device via usb, but in the menu, it's disabled.
View 8 RepliesI am developing an app in Flash Pro CS5.5 to be deployed on the NOOKcolor. I have everything set up for the computer to recognize the NOOK through the USB (was able to reboot the device by using the command prompt window). I can move files onto the device via USB but I want to be able to debug from Flash. I am successfully able to do this with a Droid 2 phone. Is there something on the NOOK that has to be set up for Flash to recognize the NOOK as an android device that it can debug on?
View 3 RepliesI have imported my wav files to my library added them to the down state of my buttons and when I test the file I get (Sound has no valid device sound path although exporting device sounds was requested in the export settings. This sound will be ignored.) I have been surching for an answer but as of yet have found none.
View 3 RepliesI'm making a VERY basic Jeopardy game, and I need buttons to be disabled after being clicked on once.
Oh, and I'm working in CS3, but I'm using AS 1&2 because that's what I learned... I have no idea how to use AS 3...
example: frame 1 has btn11 in it. btn11 when clicked takes the person to frame 2. when done with frame 2, they click on return.
the return button (btnReturn1) has the following AS
on (release) {
gotoAndStop ("Round1",1)
btn11.enabled=false;
}
the problem is that it works at first - the button disables when I get back to frame 1, but the next time I click a different button then return to frame 1, the first button I disabled isn't disabled anymore.
my actionscript so that my disabled buttons stay that way no matter how many times I come and go from the frame? or if you have a better way to do it, that'd be great. basically, it's like the jeopardy screen, and after "songs" for 200 is clicked, I don't want it to be clickable again at all.
I've downloaded the Flash CS5 trial and am trying to use the software, but a lot of buttons and symbols are greyed out for me and I don't know why. Here's a typical use case for me:
- Open Flash CS 5
- Create a new Flash AS3 Project
- Try to use the buttons on the right-hand toolbar, but they are greyed out
Also, I can import images to the stage or library, but I cannot click anything or edit their properties.See attached image for a screenshot of the buttons in their disabled, greyed-out state.I can even open an old project made in CS4, but again, I cannot edit any symbols that I've already made.Is there something I need to do to enable the buttons?
I'm using flash CS5.5 (trail version) and want to export a movei file out to device central to test acceleromoter settings.
When creating the file I : selected air fro andiod, made these changes to the publish settings : set upa certificate, tick all permission (as it kept telling me they hadn't been set) and then click ok.
For some reason under control > test movie > device central is greyed out. If i try to open the .swf file directly in device central it just tells me the device has the wrong version of flash.
Any ideas? I selected the file type as andriod?, preferably would like just to be able to click on test moving in device central.
[Code].....
I had a quick and dirty little IOS application that I thought I'd knock out in Flash CS5.5 and deliver to the AppStore.I must have missed something really important in the past 11 months.I built a small, simple app to test on my iPad.I set it up to run on GPU, set up the p12 and a new Provisioning Certificate. Deployment is set to "quick publishing for device testing". In 2 minutes or less it published to an IPA file.The problem is when I mount the IPA to iTunes Library then to my device, it is literally stuck in Loading mode.... Just to test how slow it is, I left it to run over night.Well it's still loading almost 16 hours later. Is it just me?I can't seem to find any other discussions or articles on IPA loading problems. Do I need to load some other version of something else to make this new version of Flash publish efficiently?Is this not the correct workflow from Flash to an IOS device?
View 1 Replieshow to create a scrollable text in AIR for device,
aaand, in code snippets, would all "click" actions work as with taps on device?
I have a Nexus S and trying to test my AIR for Android app in it. When I put to publish, it keeps showing me "publishing" but never ends. What that could be?
View 1 Repliesi made an scrolling image sequence,that is controlled with moving left-right mouse or finger there are 120 images and its wheight is 36 Mb.it runs great on desctop as SWF .BUT when published to .ipa and lounched on iPad 2 - black sreen for aboute 5 sec. and throws back to "home".what does that mean?
View 1 RepliesI have a main movie that contains some combo boxes. Some of them may be disabled.By pressing a button I load another movie using loadMovie. The loaded movie also contains combo boxes.When the button is pressed, the clip that shows the combo boxes is removed from the stage and the loaded movie is displayed. By pressing another button, the loaded movie is unloaded and the clip with the combo boxes is displayed again.Well, once the other movie has been loaded, when I go back to the clip with combo boxes, the disabled combo boxes have a small gray button covering the black down arrow.I have determined that so long as the loaded movie contains combo box in the library, the problem occurrs, even if there is no actual instance of it.The combo boxes that are not disabled are not affected. The combo boxes are disabled by setting "cb_name.enabled=false".If the combo box is enabled, it displays correctly, but if disabled again, it goes wrong again.My project is targeting Flash 8, so it uses AS2.I'm using Flash CS4.
View 5 RepliesIn CS5 I get the above message. I need to debug so it's very important. Anything I need to do?
View 2 RepliesWith Apple refusing to incorporate flash, is there an altenative way to view flash files through an Apple device?
View 2 RepliesWe are using default CS5 skins with an flvplayback component built through action script 3. When playing certain videos (and only certain videos, however there isn't yet a pattern), the play/pause, stop & seek buttons are completely unresponsive. They don't change stats on hover & they are unclickable.However, the fullscreen button does always work, and upon going fullscreen and coming back out, the buttons now work again. So far, the problem was seemingly at its worst displaying a video that was encoded with Sorenson spark (an older codec) and we wondered if it had to do with the file itself, the headers, anything of that sort. But the fact that the skin and buttons work fine once entering and exiting fullscreen - that is perplexing.
View 1 RepliesWhen I first downloaded Flash CS3 Professional, I was able to enter an exceedingly useful debug mode by compiling using ctrl+shift+enter instead of ctrl+enter. I could toggle break points, step in, step over and view values stored in variables at a whim.
I must have accidentally toggled some option somewhere, because this interface no longer shows up. Instead, the only extra interface I get is the output menu with the following text "Attemping to launch and connect to Player using URL <file path> [SWF] <file path> - 71984 bytes after decompression" and while the swf does halt if the as3 code reaches a break point, it doesn't tell me which break point nor give me any options to progress the flow (not even through the pull down menu I have to utilize in order to end the so called debug session).
I have a swf that I need to attach the flex builder debugger to. I have full access to the source code, and can make a debug build of this swf.
However, this swf is being loaded by a non-debug build of another swf which I don't have source code to, and can't make a debug build with.
I've tried mocking this up with two very simple swfs, and while it works fine when both are debug builds, when the outer swf is a non-debug build, while I can get the debugger to connect, I don't get trace messages, breakpoints don't work, and it seems to lock up the flash app.
I have flash installed on my mac 10.6.7 and it's version is 11.1.102.55 (Non-debug).How do i convert it into debug.
View 1 RepliesI installed the update to Flash 8 that allows for remotedebugging, and I had it all set up and working over the past weekor two. But, all of a sudden it's not working for me anymore.I wasable to access it by right clicking my movie from within thebrowser and selecting "Debugger", but for some reason the optionisn't available anymore. I've rechecked my settings according tothe livedocs, and ensured the swd file is in the same dir as theswf, but no dice.
View 2 RepliesI have both CS3 and CS4 web preium installed on my system. Ihave started working in CS4 and found that the debug window willnot work. I created a new Flash CS4 fla and added some breakpoints.It seems to run without stopping at the breakpoints and displayingmy trace statements. I have a ticket into support but no one hasanswered it yet. I remember this happening when I installed CS3 webpre but can't remember what I did to fix it. Is a uninstall of allthe products neccessary? Or should I just uninstall Flash.
View 9 RepliesWhen I debug it simply refuses to stop at the breakpoints, thus making my work flow miserable. I did some searching on Google and seems this has been there since version CS3. I never found a solution for this. I reinstalled on top of the current installation and nothing happened and then did a complete installation and still it's the same. Check the video.
I am unable to debug a swf (Test.swf) loaded with Loader (from TestLoader.swf) if Test.swf imports a class from another swf (OneLoop.swf).If I set breakpoints in Test.swf, they will not be hit when debugging TestLoader.swf.I have attached a Test.zip file which contains the necessary FLA and AS files to demonstrate the bug. To reproduce the bug.Load up Test.as, OneLoop.fla, Test.fla, and TestLoader.fla.Then put a breakpoint on line 17 of Test.as (removeEventListener)Then Publish OneLoop.fla.Then Debug Movie on Test.fla.You will see that the breakpoint stops at line 17.Then Debug Movie on TestLoader.fla.You will see that the debugger will stop at line 18 (where I throw an Error), but failed to stop at line 17.I'm using CS4 Pro 10.0.2.This problem only occurs when I import a class from the third swf.Does anyone else know how to fix the problem (without removing the imports or merging the FLAs )?
View 6 RepliesI am running into an annoying problem with Flash, particularly when I run my program in Debug. Basically I have an AS3 project at some location on my computer (c:/.../Flash/Project/project.fla) with a main script for it (c:/.../Flash/Project/code/projectMain.as). If I try to load in SWF files or JPG files from other places on my computer, I get problems. For example if I try to load files like:
[Code]...
It seems to load them fine. When I click on the movie though, I get this in the output: *** Security Sandbox Violation ***SecurityDomain 'file:///C/.../file.swf' tried to access ncompatible context 'file:///C/.../project.swf And the whole thing stops working. I have read about the security sandbox and allowDomain calls and all that, but I don't see how the domains are different. I am not deploying this to any server or anything, just trying to run the debug swf. I have access to local files by default, right?
Just purchased Droid Charge. Trying to use it with Flash 5.5 on Windows 7 to debug an application.Computer recognizes phone USB connection (so I can transfer files...)(Menu/Settings/USB settings/Mass storage enabled)I have USB debugging (Menu/Settings/Applications/Development) feature on the phone enabledI have Unknown Sources (Menu/Settings/Applications) feature on the phone enabledWhen I Publish from Flash 5.5 I get the following message: Could not find an Android device to connect to. Please ensure that you have the phone connected,the correct drivers installed, and the phone has USB device debugging enabled.
View 6 RepliesI've logged this bug but wanted to post it to the boards in case anyone else is having this same problem. It's been going on since I purchased Flash CS3 pro and has been really crippling my development workflow because I can only get the debugger to work maybe 1 in 4 times.
[Code]...
I'm an application developer, and my standard usage of Flash is as follows: I'm creating an executable application, which contains a ShockwaveFlash object instance, which in turn is displaying a Flash Movie Clip - also created by myself. The executable application and the contained Flash clip are communicating via the ActionScript ExternalInterface (using XML strings) and the FSCommand.
I'd like to be able to debug the ActionScript code of the Flash file while I'm running/debugging my executable application. For that, I need to be able to start a remote debugging session from the Flash object running inside my executable. Problem is, I did not find any way of doing this.
When I publish the Flash SWF file with "permit debugging" checked, I'm able to start a remote debugging session when I'm displaying the file in a player or a browser (the "debugging" option is shown at the right-click menu of the Flash object), but I'm not able to do the same with the object inside my executable (the "debugging" option doesn't exist on the menu).
Environment Details: The executable application is using the ShockwaveFlash COM file to create the ShockwaveFlash object. The executable application is created using VB.NET, Visual Studio 2008, .NET 3.5. The Flash SWF file is created using Adobe Flash Professional CS4. I'm developing under Windows XP (SP3).
I've migrated to FDT from flashdevelop and kind of have a hard time getting things to work the way I'm used to. In Flashdevelop, you could easily choose if the compiled swf was a release or debug version. In FDT however, it seems like there is no way to compile a version that has debugging information without it automatically opening up the debug perspective with a ton of debug windows, a profiler and actually entering debug mode.
As an extra plus, I keep getting a message saying "This feature is only available in FDT Max", although from what I know the debugger is included in the free version. Is there a way to do what I'm trying to do or should I just get used to this new way of working?
in code snippets, would all "mouse click" actions work with taps on device?
View 4 RepliesWell i am currently mkaing a virtual world using flash cs5 and smartfox server. I have all the stuff done but then i try to start the movie it says "Fonts should be embedded for any text that may be edited at runtime, other than text with the "Use Device Fonts" setting. Use the Text > Font Embedding command to embed fonts."
View 1 RepliesI just updated to CS5 - I'm working on a custom video player. It works fine embedded in a web page both locally and on the network. It works fine in the debug player. However, when I test it in the authoring player I get a NetStream.Play.StreamNotFound error and no video. I have tried setting the Local Playback Security publish settings to both local and network - doesn't find the video either way.
It used to run fine in CS4 in the authoring environment.
why are the components in my FLA disabled? nothing happens when i click on them.
if you cant open the attachments, change thier extensions from .zip to .rar