Professional :: Disabled (greyed Out) Buttons / Symbols
May 6, 2010
I've downloaded the Flash CS5 trial and am trying to use the software, but a lot of buttons and symbols are greyed out for me and I don't know why. Here's a typical use case for me:
- Open Flash CS 5
- Create a new Flash AS3 Project
- Try to use the buttons on the right-hand toolbar, but they are greyed out
Also, I can import images to the stage or library, but I cannot click anything or edit their properties.See attached image for a screenshot of the buttons in their disabled, greyed-out state.I can even open an old project made in CS4, but again, I cannot edit any symbols that I've already made.Is there something I need to do to enable the buttons?
View 7 Replies
Similar Posts:
Sep 27, 2010
We are using default CS5 skins with an flvplayback component built through action script 3. When playing certain videos (and only certain videos, however there isn't yet a pattern), the play/pause, stop & seek buttons are completely unresponsive. They don't change stats on hover & they are unclickable.However, the fullscreen button does always work, and upon going fullscreen and coming back out, the buttons now work again. So far, the problem was seemingly at its worst displaying a video that was encoded with Sorenson spark (an older codec) and we wondered if it had to do with the file itself, the headers, anything of that sort. But the fact that the skin and buttons work fine once entering and exiting fullscreen - that is perplexing.
View 1 Replies
Nov 28, 2010
I'm obviously doing something fundamentally wrong here, but in CS4, to make an .as file, I just chose to make one and started inserting code.
In CS5, when I chose to do so, or try to open a previous .as file, all my coding is greyed out.
How do I access my code, or add new code?
View 3 Replies
Sep 8, 2010
I am importing a series of mockups of a website into Flash CS5 as symbols, and it already has elements drawn in Illustrator CS5 that I want to use as buttons. I want to place those symbols into the Timeline and just use simple AS3 to make it go from one mockup screen to the other to make it into a slightly more functional mockup. 1. How can I take the mockups done entirely in Illustrator and make the buttons functional?
View 2 Replies
May 4, 2011
Is the a problem with flash cs5's pencil tool because the smoothing button is greyed out is it my syatem ?
View 2 Replies
Feb 5, 2010
I'm attempting to use CS4 (PC/Vista, if that matters) to create a SWF file that will basically act as a "library" of commonly used symbols. This SWF would be loaded at runtime by other SWFs, which could then use the symbols within it, including all art and code assets.
[Code]...
View 4 Replies
Oct 29, 2011
I'm trying to disabling a button I have, but what only happens is that the states Down and Over are disabled, but the button still does something when I click it.
ActionScript Code:
//The place where I set the event
playerOneField.player1JoinButton.addEventListener(MouseEvent.MOUSE_DOWN, handleClick);
[Code].....
View 1 Replies
Aug 2, 2008
I'm making a VERY basic Jeopardy game, and I need buttons to be disabled after being clicked on once.
Oh, and I'm working in CS3, but I'm using AS 1&2 because that's what I learned... I have no idea how to use AS 3...
example: frame 1 has btn11 in it. btn11 when clicked takes the person to frame 2. when done with frame 2, they click on return.
the return button (btnReturn1) has the following AS
on (release) {
gotoAndStop ("Round1",1)
btn11.enabled=false;
}
the problem is that it works at first - the button disables when I get back to frame 1, but the next time I click a different button then return to frame 1, the first button I disabled isn't disabled anymore.
my actionscript so that my disabled buttons stay that way no matter how many times I come and go from the frame? or if you have a better way to do it, that'd be great. basically, it's like the jeopardy screen, and after "songs" for 200 is clicked, I don't want it to be clickable again at all.
View 1 Replies
Jul 3, 2010
I want to generate a button sequence on ButtonBar with some disabled buttons:[code]
View 1 Replies
Nov 16, 2004
I have this movieclip with buttons residing in the main timeline. This movieclip is set with an _alpha = 0. How do I disabled this movieclip/buttons in the main timeline as well? The movieclip will be visible only if another button(not within this movieclip) is pressed. I tried using the following but it doesn't work. movieclipInstanceName.enabled = false; How do I go about doing it?
View 7 Replies
Nov 16, 2004
I have this movieclip with buttons residing in the main timeline. This movieclip is set with an _alpha = 0. How do I disabled this movieclip/buttons in the main timeline as well? The movieclip will be visible only if another button(not within this movieclip) is pressed. I tried using the following but it doesn't work. movieclipInstanceName.enabled = false; How do I go about doing it?
View 7 Replies
May 27, 2011
I have an iPhone4 plugged in via usb.I an create ipa files and put them on the phone using iTunes.I would like to be able to use the test/debug on device via usb, but in the menu, it's disabled.
View 8 Replies
Aug 22, 2007
I have a series of buttons that when rolled over I want some text to highlight.First, I need to know if the text has to be a symbol with an instance name to get this done.Second I can't find the code to even begin making my buttons change another symbol
View 1 Replies
Mar 16, 2010
I have a main movie that contains some combo boxes. Some of them may be disabled.By pressing a button I load another movie using loadMovie. The loaded movie also contains combo boxes.When the button is pressed, the clip that shows the combo boxes is removed from the stage and the loaded movie is displayed. By pressing another button, the loaded movie is unloaded and the clip with the combo boxes is displayed again.Well, once the other movie has been loaded, when I go back to the clip with combo boxes, the disabled combo boxes have a small gray button covering the black down arrow.I have determined that so long as the loaded movie contains combo box in the library, the problem occurrs, even if there is no actual instance of it.The combo boxes that are not disabled are not affected. The combo boxes are disabled by setting "cb_name.enabled=false".If the combo box is enabled, it displays correctly, but if disabled again, it goes wrong again.My project is targeting Flash 8, so it uses AS2.I'm using Flash CS4.
View 5 Replies
Jul 2, 2009
how to move an object built from multiple symbols (including movie clips with interactivity) in a timeline other than the root? I tried putting them all in another symbol, but then the interactivity was lost.
On a boad scope, what I'm trying to do is animate a "digital multimeter" out of the way when not in use, and vise versa.
View 5 Replies
Jan 25, 2009
I was going through the chapter 9 topic of animating 3d elements in Todd Perkins Flash CS4 professional essential training on lynda by opening the file and following along by clicking into the movie clip, but doing so caused me to go into symbol editing mode. When he does it on the video he goes straight into the movie where you can see the other elements on the stage. I right clicked on the movie clip and noticed that edit in place is greyed out. Why can't i get into the movieclip so i can edit the animation while seeing the other elements on the stage? I've researched everywhere and i'm confused how i can be going into symbol editing mode directly from the stage. It is late on a sunday night and i am now questioning my sanity.
View 2 Replies
Jul 2, 2010
I'm trying to debug my movie, but the variables in the debugger are greyed out and I can't expand them. It also doesn't show the progress through the code. I think it's related to having loaded an external swf.
View 1 Replies
Nov 11, 2009
I imported to library a jpg (of a book). I simply want it to "grow" abit. I converted it to symbol, placed it in a keyframe. Made a new key frame at the end. But when I try to insert a shape tween, that choice is greyed out.
View 3 Replies
Feb 21, 2012
When I open a document in Flash CS5.5 that was created in CS5, for some reason the buttons appear invisible when the document is published.
Buttons are also appearing invisible when they have been brought in from the library of another CS5.5 file.
View 1 Replies
Apr 18, 2011
I am trying to assign a sound class, but found it was greyed out.
View 2 Replies
Oct 29, 2008
I used this tut to create a menu. [URL] And my question is; Can I make the slider to move after a movie clip symbols instead of button symbols? That way my menu would be animated.
View 1 Replies
Oct 26, 2010
I'm working through a book called Foundation Game Design with Flash, and I'm finding the Flash IDE confusing. I've been programming for several years, so working with AS3 directly is far easier than trying to understand symbols and nested symbols and the difference between graphics and movie clips and scoping issues and all that -- when tied into the IDE.
How many of you who are making games in AS3 also use the Flash IDE? Can anyone recommend a resource that is AS3 heavy and Flash IDE light? I don't care how much time I may or may not save by using things like the timeline, I just want to understand what I'm using.
View 9 Replies
Feb 13, 2012
Is there any way to do that, well bone tool is for AS3 only.. so how would you connect symbols with other symbols?
View 5 Replies
Aug 18, 2010
making characters at the following link:
[URL]
The animator said that he has created two symbols: one for the body, and another symbol inside the body symbol for the head.What I don't understand is how he translated the layers over into the head symbol. When I click on the head symbol, all of the layers disappear and I cannot edit an object individually within a layer.
View 1 Replies
Sep 6, 2010
when I enter a symbol by default everything around that is not part of that symbol becomes faded - is there a way to disable this?
View 4 Replies
Oct 9, 2010
In CS5, I want to create a simple series of still images that display in the Timeline for about 5 seconds each. Is there an easy way to do either of the following:
1. Change the Timeline to display in seconds instead of frames?
2. Specify how long something should appear prior to the next symbol showing up in the Timeline?
View 2 Replies
Dec 19, 2010
I have an .fla I created a while ago. In it is a movie clip in my library which I now want to use in a new .fla. This movie clip is reliant however on an image which is also in the library. I have tried selected both the image and movie clip, copy them, and paste them into my new library, but this doesnt work. I have tried cutting... I have tried duplicating and copying the duplicate. Nothing seems to work. Is there anyway of getting a symbol from one library into another?
View 3 Replies
Mar 2, 2011
i am using CS4 on a PC, and I have created my motion guide layers as I normally do, created a path, but when I scrub the playhead, the symbol just goes from point A to point B without follwing my guide. Also they are not snapping to the guide. I have not done a motion guide in a while, what am I missing here. Also where is the pallete to turn on object orienting?
View 1 Replies
Sep 20, 2011
Is there a way to search for symbols by the class they are using? I have a large projectand at times (specifically when refactoring)
View 2 Replies
Oct 28, 2011
I watched a tutorial where they added bones to a "Symbol" but when I try it it doesn't work.What I did was I imported a bitmap image and converted it to a "Symbol" but it wouldn't take the bone tool. How do I do this?
View 1 Replies