When I debug it simply refuses to stop at the breakpoints, thus making my work flow miserable. I did some searching on Google and seems this has been there since version CS3. I never found a solution for this. I reinstalled on top of the current installation and nothing happened and then did a complete installation and still it's the same. Check the video.
May I ask how to add breakpoint and debug AS3 in Flash CS3?
View 3 RepliesI'm using an Ant build script for my project developed in Eclipse 3.4.2. It's actually a Flex 4 project (using Flash Builder Eclipse Plug-in).Everything worked ok. But someday something happened and now the executions of Ant build script is silently terminated each time I run it.
When trying to debug Ant script the IDE stops for a moment on a breakpoint and then skips it.Standalone Ant execution (using command line) works well for my script.
In CS5 I get the above message. I need to debug so it's very important. Anything I need to do?
View 2 RepliesI have both CS3 and CS4 web preium installed on my system. Ihave started working in CS4 and found that the debug window willnot work. I created a new Flash CS4 fla and added some breakpoints.It seems to run without stopping at the breakpoints and displayingmy trace statements. I have a ticket into support but no one hasanswered it yet. I remember this happening when I installed CS3 webpre but can't remember what I did to fix it. Is a uninstall of allthe products neccessary? Or should I just uninstall Flash.
View 9 RepliesJust purchased Droid Charge. Trying to use it with Flash 5.5 on Windows 7 to debug an application.Computer recognizes phone USB connection (so I can transfer files...)(Menu/Settings/USB settings/Mass storage enabled)I have USB debugging (Menu/Settings/Applications/Development) feature on the phone enabledI have Unknown Sources (Menu/Settings/Applications) feature on the phone enabledWhen I Publish from Flash 5.5 I get the following message: Could not find an Android device to connect to. Please ensure that you have the phone connected,the correct drivers installed, and the phone has USB device debugging enabled.
View 6 RepliesI have a swf that I need to attach the flex builder debugger to. I have full access to the source code, and can make a debug build of this swf.
However, this swf is being loaded by a non-debug build of another swf which I don't have source code to, and can't make a debug build with.
I've tried mocking this up with two very simple swfs, and while it works fine when both are debug builds, when the outer swf is a non-debug build, while I can get the debugger to connect, I don't get trace messages, breakpoints don't work, and it seems to lock up the flash app.
I have flash installed on my mac 10.6.7 and it's version is 11.1.102.55 (Non-debug).How do i convert it into debug.
View 1 RepliesI've logged this bug but wanted to post it to the boards in case anyone else is having this same problem. It's been going on since I purchased Flash CS3 pro and has been really crippling my development workflow because I can only get the debugger to work maybe 1 in 4 times.
[Code]...
I'm an application developer, and my standard usage of Flash is as follows: I'm creating an executable application, which contains a ShockwaveFlash object instance, which in turn is displaying a Flash Movie Clip - also created by myself. The executable application and the contained Flash clip are communicating via the ActionScript ExternalInterface (using XML strings) and the FSCommand.
I'd like to be able to debug the ActionScript code of the Flash file while I'm running/debugging my executable application. For that, I need to be able to start a remote debugging session from the Flash object running inside my executable. Problem is, I did not find any way of doing this.
When I publish the Flash SWF file with "permit debugging" checked, I'm able to start a remote debugging session when I'm displaying the file in a player or a browser (the "debugging" option is shown at the right-click menu of the Flash object), but I'm not able to do the same with the object inside my executable (the "debugging" option doesn't exist on the menu).
Environment Details: The executable application is using the ShockwaveFlash COM file to create the ShockwaveFlash object. The executable application is created using VB.NET, Visual Studio 2008, .NET 3.5. The Flash SWF file is created using Adobe Flash Professional CS4. I'm developing under Windows XP (SP3).
When I first downloaded Flash CS3 Professional, I was able to enter an exceedingly useful debug mode by compiling using ctrl+shift+enter instead of ctrl+enter. I could toggle break points, step in, step over and view values stored in variables at a whim.
I must have accidentally toggled some option somewhere, because this interface no longer shows up. Instead, the only extra interface I get is the output menu with the following text "Attemping to launch and connect to Player using URL <file path> [SWF] <file path> - 71984 bytes after decompression" and while the swf does halt if the as3 code reaches a break point, it doesn't tell me which break point nor give me any options to progress the flow (not even through the pull down menu I have to utilize in order to end the so called debug session).
I installed the update to Flash 8 that allows for remotedebugging, and I had it all set up and working over the past weekor two. But, all of a sudden it's not working for me anymore.I wasable to access it by right clicking my movie from within thebrowser and selecting "Debugger", but for some reason the optionisn't available anymore. I've rechecked my settings according tothe livedocs, and ensured the swd file is in the same dir as theswf, but no dice.
View 2 RepliesI have an iPhone4 plugged in via usb.I an create ipa files and put them on the phone using iTunes.I would like to be able to use the test/debug on device via usb, but in the menu, it's disabled.
View 8 RepliesI am unable to debug a swf (Test.swf) loaded with Loader (from TestLoader.swf) if Test.swf imports a class from another swf (OneLoop.swf).If I set breakpoints in Test.swf, they will not be hit when debugging TestLoader.swf.I have attached a Test.zip file which contains the necessary FLA and AS files to demonstrate the bug. To reproduce the bug.Load up Test.as, OneLoop.fla, Test.fla, and TestLoader.fla.Then put a breakpoint on line 17 of Test.as (removeEventListener)Then Publish OneLoop.fla.Then Debug Movie on Test.fla.You will see that the breakpoint stops at line 17.Then Debug Movie on TestLoader.fla.You will see that the debugger will stop at line 18 (where I throw an Error), but failed to stop at line 17.I'm using CS4 Pro 10.0.2.This problem only occurs when I import a class from the third swf.Does anyone else know how to fix the problem (without removing the imports or merging the FLAs )?
View 6 RepliesI am running into an annoying problem with Flash, particularly when I run my program in Debug. Basically I have an AS3 project at some location on my computer (c:/.../Flash/Project/project.fla) with a main script for it (c:/.../Flash/Project/code/projectMain.as). If I try to load in SWF files or JPG files from other places on my computer, I get problems. For example if I try to load files like:
[Code]...
It seems to load them fine. When I click on the movie though, I get this in the output: *** Security Sandbox Violation ***SecurityDomain 'file:///C/.../file.swf' tried to access ncompatible context 'file:///C/.../project.swf And the whole thing stops working. I have read about the security sandbox and allowDomain calls and all that, but I don't see how the domains are different. I am not deploying this to any server or anything, just trying to run the debug swf. I have access to local files by default, right?
I'm learning the Flex command-line debugger, and I haven't been able to find information on this particular use case.I'd like to add a breakpoint to a specific line in one of my class files. I can add breakpoints at the start of a function in a class, but I can't figure out how to set it at a specific line (e.g. line 117 in Foo.as)?When I try to set one for a file on a given line, I get one at a different location:(fdb) break Foo 111Breakpoint 1 at 0x######: file Foo.as, line 115I've verified the line # I'm specifying is valid, so I don't think the FDB is trying to compensate.
View 1 RepliesIs there any statement in Actionscript 3 which acts as a breakpoint when executed? That is, something like JavaScript's "debugger" statement. I need it when developing AS3 applications without an IDE. Setting the breakpoint manually in fdb is rather tedious.
View 1 RepliesHow can I toggle a breakpoint directly from code? I want to have something like this[code]...
View 1 RepliesIs there any free or open source software that does a great job at debugging as3 applications, like flex does?
View 1 RepliesI am developing an app in Flash Pro CS5.5 to be deployed on the NOOKcolor. I have everything set up for the computer to recognize the NOOK through the USB (was able to reboot the device by using the command prompt window). I can move files onto the device via USB but I want to be able to debug from Flash. I am successfully able to do this with a Droid 2 phone. Is there something on the NOOK that has to be set up for Flash to recognize the NOOK as an android device that it can debug on?
View 3 RepliesWhenever I debug my AIR app it keeps suspending at a certain line of code...it doesn't give me a reason why, it just says Main Thread (Suspended) No error, no breakpoint at this location either. If I comment out the code so that, that line does not execute, it just does the same thing on a different line of code.
[Code].....
I've migrated to FDT from flashdevelop and kind of have a hard time getting things to work the way I'm used to. In Flashdevelop, you could easily choose if the compiled swf was a release or debug version. In FDT however, it seems like there is no way to compile a version that has debugging information without it automatically opening up the debug perspective with a ton of debug windows, a profiler and actually entering debug mode.
As an extra plus, I keep getting a message saying "This feature is only available in FDT Max", although from what I know the debugger is included in the free version. Is there a way to do what I'm trying to do or should I just get used to this new way of working?
We have Flash CS3 and CS4.When I open a simple file with a trace it will show in CS3,but the output window in CS4 keeps empty.[code]...
"Adobe Flash Player 10 couldn't connect with debugmode or anlalyse" (translating it from Dutch)
Is there a way where I can save and debug a file in flash cs3 with combo keystrokes?I'm running cs3 on a windows computer and I usually do ctrl+s to save and then do ctrl+shift+enter to debug... and I was just wondering if I can combine these 2 actions with one combination of keystrokes.
View 1 RepliesI have a Flex 4 application which connects to ASP.NET webservice based on FluorineFx. It is authenticated by cookies via RemoteObject.setCreadentials()
Both applications connect to FMS server and talks to each other via RTMFP direct connection (P2P).
I want to debug both instances of this application in Firefox and Internet Explorer at one time by single click (F11).
Now I can debug only in one browser by running Debug in Flash Builder 4. I have created double browser runner with bat file registered as default browser in Preferences > General > Web browser that looks like this:
start "IE" /b "c:Program Files (x86)Internet Exploreriexplore.exe" -private %1
start "FF" /b "c:Program Files (x86)Mozilla Firefoxfirefox.exe" -private %1
But this connects the debugger only to firstly run instance of the application in Internet Explorer.
How can I attach to and debug both instances?
I've been working in Flash BUilder 4.0. I installed Flash Builder 4.5, and switched to the workspace I had used for 4.0. Then we were told to go back to 4.0, and now I can't run or debug. I can build, but then I have to double click on the .html file to run. Right clicking doesn't bring up run or debug, and the run and debug icons are not in my toolbar.
View 3 RepliesI saw in some projects that ppl has their own "Debug class".So, instead of typing: trace("look at this!") you type Debug.trace("look at this!").The only advantaje I saw was that you can disable every single trace call with a single parameter in the Debug class.. but, thats all.
View 2 RepliesI'm writing application in Adobe Flash Builder 4.5 using AIR 3 SDK. I want to debug throw swf files which downloaded from the internet.My project consist of:
1. MainProject (Android Mobile app proj)
2. LibFile (flex project)
3. ExtraGame (web app using LibFile).
So, when I build .swf file from LibFile+ExtraGAme, load it from internet and run it from MainProject in different Application domains - I can't debug in ExtraGAme project. So how can I debug such projects?
When the loader finishes, it send the data to a plotter function. the plotter function clears the graphics in a shape called graphLine.It then draws a line from one plot point to another using the lineTo function.Basically ever 3 second it makes this request and redraws the screen and updates the value of a textfield to the current y value. In flex builder 3, it works great in debug mode. The screen updates just fine. However, when I make the release build and test it out in a browser, it loads the data fine, but will not draw it until I stop the graphing process.Here's the code for the graphing function
Code:
public function graphData(data:Array):void
{
[code].....
How do you debug flash in the browser?When I run my swf from my hard drive, it works perfectly. When I run it embedded in html, there is an error. I don't know how to debug this kind of problem.URL...
View 2 Replies
