I am having a slight issue, i have created a flash file 800 x 600,But i need to split it into half... i already have animations on both halfs which overflow to the off screen,Is there a way of cutting the content in half via width (400x600)? (im uploading the content into a system which requires it in 2 halfs and also if i have any content off screen is messes up...)
View 4 RepliesI was looking at this tutorial, this is exactly what I am trying to do with my website, but this is AS3, is there a way to change the code so it will function exactly the same but with AS2 code instead.
I have already contstructed my site with AS2, which then wont allow this code to work, Is there even a way I can have an AS3 index file that loads the movies with the AS2 and applies the same resizing to the movies that have been loaded.
I have a List Component being resized at runtime based on the size of the Stage. It seems to scale the content rather than just changing the bounds of the list. Is there a way to change its size programatically without scaling the content?
View 1 RepliesAny code for resizing a swf film and content. This is to make possible to see the entire movie as one resizes the browser window.
View 1 RepliesI thought that in the past I had seen a tutorial on this site teaching how to have a outlined box scale smaller and larger when a button is clicked, and the size of the box scales to a certain size depending on what loads inside the box. When this happens the outline does not change either. This all being done in most likely actionscript?
Well I have searched extensively and have not found it on this site, which I thought is where I had seen it. Anyway I was wondering if anyone knew of the tutorial or if they could tell me how to do what I have exlained above that would be really awesome!
I have a banner that is 468x60 pixels and I need to rezize it to 728x90 - this includes scaling all of the content over the timelines proportionally.
View 6 RepliesI have a SWF that pulls in movie files. I need a way to detect the size of the file that is being pulled in and scaling it appropriately..
Code:
import caurina.transitions.*;
var conn:NetConnection = new NetConnection();
conn.connect(null);
[Code].....
I have flash content online that is 1024x800 px but need it to resize/scale dynamically if the browser window is resized or someone with a browser height of less than 800 visits the website.
Been looking at stage.resize and event.resize but can't figure them out. Also have looked at swfobject and swffit (not actionscript I know) and can resize my content to a specific size using swfobject but not dynamically.
I would like to know how to resize flash to fit in browser/monitor sizes. This site http:[url]....is a perfect example. Notice how it opens with no scroll and fits to a window that matches your screen size.
View 1 RepliesI've just run through this tutorial and I've got my site centering in my browser as planned.However when I resize my browser window the text (I'm using a pixel font) is going fuzzy.Is there some way I can lock 'centerRectangle' to a rounded X and Y coordinate so that this doesn't happen?
Code:
function init()
{
[code]....
I have a main flash container move that loads in multiple swf files. I created a movieclip container in the main flash container that resizes and positions according to the stage height and width as follows:
Code:
swf_width=stage.stageWidth;
swf_height=stage.stageHeight;
new_container_height=swf_height;
[Code].....
This works fine if no graphics are off the stage in the loaded swfs. Otherwise if I have a scrolling menu and the buttons out width the containing mc it takes into account the masked content width and centers the movieclip accordingly throwing alignment off.
Is there a way to ignore masked content when getting stage width and height?
I'm working on my portfolio site and would like to resize the background only like this site [URL]For resizing a flash movie, I tried this script
Quote:
Stage.align = "TL";
Stage.scaleMode = "noScale";
//size bg_mc to match stage size
[code]....
It succeeds resizing but is NOT in proportion
1. editing the script thus the picture resizes with contrain proportions?
2. I'd also like to have it centerized during resize.
I'm working on a flash site, but I want the site to resize to the user's screen resolution...I'm new at actionscript and flash, but what is the most efficient way to accomplish this?
View 3 RepliesI am using % values for height and width properties of my components, so they would look some what similar in different screen resolutions. But when the aspect ratio changes or on Wide Screen monitors, my components are looking very badly as in not consistent and somewhat stretched.
View 2 RepliesI have finished my flash game, but when I used web Browser such as Chrome or FireFox to run it, it enlarged my game to full size of the browser. Is there anyway( in AS3 script) that I could prevent this from happening as well as hide the symbols that their sizes are bigger than my default size defined at the document property panel?
View 1 RepliesI'm using the code below to resize a mc so that it fits a full screen browser even when its resized. Its working fine but...
How do you make the mc (bga) resize in proportion. At the moment it squashes & stretches
// ***Stage aligned top left
Stage.align = "TL";
// *** Stop the stage from scaling with the browser window.
[Code]....
Just want to find out something... I have a .swf video file which I open with the normal Adobe Flash player 10. What happens is that when I open that file in a smaller screen resolution there's some parts missing (cuts it off around the edges).
How can I resize the content to fit in any screen resolution?
I have edited the pageflip script and file to suit what I need to do and my issue is not related to the usual addition of pages or content etc... but is to do with publishing the file. I have increased the sizes of the page from what they are in the original file and this is where the issue lies because when I come to publish the file as an exe the content no longer seems to fit the window when published and you have to expand the viewer. The instructions for quite a lot of the pageflip is there and pretty easy to decipher however outputting/publishing the file seems to be unclear.
Can somone please point me in the right direction for resizing the stage or changing the settings so that the published file shows all the content without the need to resize the window?
I posted this in the Flash MX2004 forum, but I hope I have better luck here.[URL] In that website, how do they keep some of the movieclip items locked on the edge of the screen? When you resize your screen, the items on the edges are the ones that moves correspondingly. And the fillers are near the middle part. Someone mentioned about adding a listener and act to a onResize command?
View 3 RepliesI'm new to Flash builder and I'm having this weird screen resizing issue. I'm setting up my .swf of dimensions..
Code:
[SWF(width="760", height="600", frameRate="32", backgroundColor="#000000")]
And I'm using...
Code:
stage.scaleMode = StageScaleMode.NO_SCALE;
But for some reason, which I don't get is that when I do no_scale, the .swf window resized to 760x620, and I have these 20 pixels at the top, which are less than zero in Y, if I leave that line out, my graphics on the screen (isometric tiles) look distorted but the screen stays at 600 px in height.
Consider the following Flex code:
private function fullScreenHandler(evt:FullScreenEvent):void {
if (evt.fullScreen) {
viewstack.selectedIndex = 2;
[Code].....
I have a viewstack with two containing canvases. Canvas 1 is used when in normal mode and canvas 2 which is used when in full screen mode.
To properly resize the objectInViewStack2 I need to know how large the screen is when in full screen mode.
My main swf is 960x600 and loads full screen. it is a projector or swf, local. I have the code on frame 1 to ensure full screen and show all:
stage.scaleMode = StageScaleMode.SHOW_ALL;
stage.displayState = StageDisplayState.FULL_SCREEN;
Then I load an external swf into a mc, and it goes full screen as expected. BUT the main swf that loaded that external one, at the time of load, suddenly gets scaled back down to its normal size: 960x600, on the top left corner of the Player Window (or the full screen), so somehow at 0,0. Whn I unload the external swf, I can put the code stage.scaleMode = StageScaleMode.SHOW_ALL; to get it back to where it was. But unfortunately I have some buttons from the Main swf that are supposed to be on top of the loaded one, and should stay where they are. But now they all move because of this scaling down.
the mc that is being used as a container for the loaded external swf is an empty mc located at 0,0. The external swf has the same size as the main one: 960x600
I searched and tried things but could not get it to stay in show-all mode when loading this external swf...
How do you prevent all of your text automatically changing the font size when a browser is made full screen? I have a number of fixed field sizes I want my text to stay within but when the browser is expanded to full screen it changes the fonts so the text no longer fits in the text boxes and it forces scrolling.
View 2 RepliesI'm new to Adobe Flash CS4. I'm making an animation of some fish underwater. I have 2 small fish motion tweened to follow a large fish from left to right. When I view the animation in full screen the small fish seem to be wiped off the screen at a certain point. The tween box continues to follow it's path but the symbol disappears. This only seems to happen with larger objects.
[Code]...
I have an AS2 image gallery with thumbnails and fullsize images and descriptions that load from external XML-files. I have found out how to take this gallery into true full screen. But when going full screen, I want only the full size image to scale up. Descriptions and thumbnails should stay the size they have when the flash movie is in its normal display state.
Attachments: Gallery.txt.zip (998 bytes)
I thought there was a simple way to make Flash content display full-screen on two monitors at once, but I can't seem to recall how to do it.
Searching on the topic is tough because so many people are talking about the ability to keep a full-screen video playing while working on another screen, which is not what I want. I need an app I'm developing at 2880 x 900 to be viewable full-screen across two monitors horizontally.
I've tried
stage.displayState = "fullScreen";
activate from a user click, but it fills only one screen.
I've tried it from within a projector and from a browser with allowFullscreen set to true, and using version 10.2 of the player.
I have a small problem with loading in a XML-file into an AS3.0 script The thing is the code is not giving errors but my screen is not displaying my content. What should I do ?
[Code]...
I am trying to print a HTML from my air app, however, this HTML should never be seen on screen. I am using HTMLLoader for this, as per some sample I saw on the web.
What happens, is that there is a print dialog, but it prints out a blank page.
If this is a window application, and I click some button to print (just the HTMLLoader) it gets printed.
Following is my code.
var mySprite:Sprite = new mySprite()
var loader:HTMLLoader = new HTMLLoader()
loader.loadString("ADDRESSThu Aug 20 21:37:20 GMT+0530 2009")
[Code].....
All my scripts are being loaded non-blocking, all are before except for one in but I tested removing it and the white flash is still happening on page loads.All my stylesheets are using link rel in the head. I'm out of ideas.
View 1 RepliesI'm displaying a 720x1280 image in a 720x1280 SWF. My screen is 1366x768.The visualization is awful since my image is cut off (although internally the image's size is still 720x1280 when I do trace() ).Everything is suitably displayed on Firefox.
View 2 Replies