Professional :: Text Not Displaying Correctly On Publish?
Aug 4, 2010
I recently hired a programmer to design a flash health calculator for my website. It works great and text shows up correctly when viewing online and standalone. The problem starts when I try to edit the file. I wanted to change some text in an action layer. That seems to work out fine but when I try to publish I get garbled text.
I should also mention that when loading the file I get a Font Mapping dialog box stating "The document 'x' contains one or more fonts not available on your system. The text will display and publish with the font mapping below:". I have tried to select various fonts in this dialog box but still get garbled text.
When I publish I also get this on the Output box: "Fonts should be embedded for any text that may be edited at runtime, other than text with the "Use Device Fonts" setting. Use the Text > Font Embedding command to embed fonts."
View 3 Replies
Similar Posts:
Jul 27, 2010
After making changes to a perfectly working fla it won't publish correctly,meaning:1. When previewing all the components jump (as usually happens when there isa compile error) but no error is displayed in the log.In this case when used with the whole project, the project doesn't load,even though the corrupted fla is not the first loaded (non of the fla loadsbesides the preloader).2. When previewing and running with the whole project the labels on thebutton components disappear, but only the ones that are dynamically changedby an external as file.*there are other similar bugs as well like unable to enter the table in thegame etc.The changes I make before it happens:- changing the size of a shape inside a movie clip.- changing the size of a movie clip.- changing anything in an already existing code (like changing the size of afont).- adding new basic code anywhere (like trace code).
- changing button skins.Basically, any change I make corrupts the file but not consistently,meaning, I can make the same change twice and the file will break only one of thetimes, or, I can make several changes until it breaks.It also happens on every computer but also, not consistently, I can work fora while, making the same change, deleting, making the change again etc, onlyon the fifth or sixth time the file will break. On a different computer itcan take only two or three times.The corrupted file start working again after I change the name of the foldercontaining my project or move all the files to a different folder anywhereon my computer. After a short while the file crushes again.
View 1 Replies
Jul 2, 2010
I was coding an AS3 file and it worked great until I started writing a class to extend the textfield class. After that, every time I tested my movie, the text field is created but nothing showed up. After some troubleshooting, I discovered that the text was actually in the text field, but was outside of the bounds of the text field and the field's height cannot be resized through code or with multiple lines of text. I found this out because I could copy the text and paste it into a text editor (and no, the text isn't set to white). Everything works properly with dynamic text fields created on the stage, just not when created in actionscript. I have tried embedding a font and using the default with no luck. The code even works on a different machine!! The same problem occurs in AS2. I have tried dumping the class file I created, reinstalling Flash, the Flash Player, and even uninstalling my font management program and still nothing.
[Code].....
View 7 Replies
Jul 7, 2009
Okay, I'm making a Flash news blog thingy using xml (obviously).
I have the title, date, etc. dynamic text boxes(with the font embedded and instance names and whatnot) on a bar for each item which are all on a new's box which is on the stage. [code]...
View 2 Replies
Aug 28, 2011
When I create a TLF text area that is editable at runtime (which means that it can get a user input at runtime) I set the text direction to the 'right-to-left' definition in both the 'container and flow' and the 'paragraph' sections and set the language for Arabic or Hebrew at the 'locale' setting. I also set the text alignment to the 'align to start' mode. Now at runtime there's a stange thing. When I try to click with the mouse cursor on the editable TLF text-box, it's not displaying the text icon cursor and don't allow me to insert text inside.
But when I move my mouse cursor over the right side of the editable TLF text box, it change his appearance to the familiar text cursor which indicate that if you click here you will be able to insert text input inside. So my problem is how can I make it that only when I will hover over the TLF text box itself, the mouse cursor will be changed to text cursor icon and when I will hover beside its right side, it will remain at the normal cursor mode.
View 1 Replies
Jun 2, 2009
So i've created an interface for a lobby display. It's running on a 52" LCD (1280x768). I have the computer hard wired to the display (HP Laptop with standalone flash player) and have the same resolution settings set on it. Now, I built the interface on my Mac desktop and have the stage set to 1280x768.
The kicker: When i run it on the display, there's a lot of extra vertical space at the bottom. When i change the resolution to 1280x1024, it fills the screen vertically properly, but then shortens it horizontally.
View 3 Replies
Nov 4, 2011
I usually program with C#, PHP, html etc.trying to learn Adobe Flash now so i downloaded the trial version which has 30 days trial.tried to create and follow the tutor for click ball which all of the code is the same but it doesnt work.
I triple check the code and its all right but it still not working.so i commented out all of the code and has a simple code of changing the text of the label.i set the text to "abcdefg" and but it only show "cdef".i expanded the width of the label so width is not the issue. trying to search for the limitation of the trial but i dont see any.trying to test this before i buy it.it does change but not changing correctly.i try to set to another value it always show partially only.
View 3 Replies
Jan 16, 2011
So, I have some basic actionscript code. It's a legacy site, so I'm using AS2. The line of code simply does this:
myField.text = "some text"
So, I select the text field on the stage, then ensure the font is embedded. All the glyphs I want are checked, but then when I compile and test, the fonts don't show up when the code is executed. Instead, the textfield is blank! What happened?! Where did the text go?
I should mention that the .swf which I compile is loaded into another parent .swf during runtime. If that parent .swf does not contain embedded fonts, is that why it's broken?
View 1 Replies
Apr 27, 2011
Whenever I test or publish a CS5 movie that uses TLF text (no matter which font), the .swf displays all elements but the text. There's simply nothing there. I'm on a mac with Snow Leopard, 10.6.7. This only happens as soon as I pass the 1000 frame limit (before, everything displays fine). Reaching wit's end here. Anyone know what causes this, and more specifically, how to solve it?
View 1 Replies
Jul 13, 2009
I have a PC fiash file with static body text that is New Gothic font. The published swf looks great on the PC, though when testing on Mac, none of the text appears. I thought that with static text fields, the font is automatically embedded?
how I can get the font to display properly on a Mac?
View 3 Replies
Feb 11, 2009
I recently started using FF_Hero on a project but I noticed that the bottom 3 pixels are not displaying effecting g,y,q. It has nothing to do with the text box size. Non pixel fonts work fine...is there a work around?
View 3 Replies
Mar 24, 2009
I have a simple class which contains a TextField. The textfield is populated with data from an XML file.
i am using the code:
txtField.htmlText = xmlElement.node.node.text();
txtField.setTextFormat(txtFmt);
If i don't use any HTML tags, it displays fine. But if I add tags, such as <a> or <b>, etc... the text within the tags does not display. For example, if in the XML text i have:
<node>For more information, <a href='http://www.link.com'>Click Here</a> to see the information. When I run the flash move, it displays: For more informationto see the information.
If i remove the <a> tags, it displays fine.
View 2 Replies
Jul 19, 2010
I downloaded a XML based website flash template and made some modifications to it. With this template there was few fonts included in separate folder (I had to install them to view swf and edit fla correctly) after all my mods done I published it to swf file and opened local file with browser, everything was working perfectly at this moment. Then I asked my friend if it could upload it on his server to check if this website looks the same on the web. I noticed that text (which is written with custom font that was included) is either missing or misplaced
View 5 Replies
Jul 27, 2010
I'm edit a flash file that uses about 11 different fonts. When I toss it into the editor and publish it some characters are missing from the product, such as W's and M's. I've installed the fonts that were included with the flash file into windows7.
View 4 Replies
Nov 3, 2008
I have a simple litte banner I did with flash (version 9.0). Just a few images and some text that I fade in and out with a motion tween. When i publish this to an animated gif, the text turns into blobs on the screen.
View 6 Replies
Nov 14, 2009
I've attached 2 screenshots. The first shows the flash stage at its default size - as you can see my font is all distorted and weird looking but when you zoom in (image 2) it's exactly like it should be. What would make it look like this when the stage hasn't been zoomed out or anything, it's just from pressing cmd and enter from flash?
I embedded it by putting it into the fla's library.
View 3 Replies
Nov 17, 2010
I have a 843 pixel x 181 px SWF file that is in a Dreamweaver CS4 HTML table. It plays but the Flash files actual location on the web page is off.It is shifted about 1 or 2 pixels down and 1 or 2 pixels to the right on IE 8, Firefox 3.6.12 and Safari 5.0.1 on the PC.[url]...
View 5 Replies
Jul 8, 2011
I am experiencing some rather quirky behaviour with datagrid itemRenderers. First, I create an ArrayCollection as follows:
[Bindable]
private var myBooleans:ArrayCollection = new ArrayCollection([false,true]);
And afterwards I bind it to a datagrid:
<mx:DataGrid dataProvider="{myBooleans}" width="100%" height="100%">
<mx:columns>
<mx:DataGridColumn
xmlns:mx="library://ns.adobe.com/flex/mx"
[Code].....
When running this, the datagrid only shows a row with the correct itemRenderer if the boolean == true. For the row where the boolean == false, it will display an empty row.
I would also like to add that wrapping the boolean in a wrapper object will not cut it for my use case since I will receive an ArrayCollection of unwrapped booleans through an RPC call.
View 1 Replies
Aug 9, 2011
I have a flex AreaChart with a custom dataTipRenderer:
<mx:AreaChart id="numParticipants"
dataProvider="{UsersModel.graphData.data_points.point}"
seriesFilters="[]" right="10" left="10"
[Code].....
View 1 Replies
Apr 12, 2011
This is what i am trying to do: -User enters Array Values and Labels, it should sum up the values and will push a record i.e. Total, (Sum of Values) -Example user enters Jan, Feb, Mar in Labels and 10, 20, 30 in Values, so the out put should be
{title:Jan, data: 10}
{title:Feb, data: 20}
{title:Mar, data: 30}
{title:Total, data: 60}
View 0 Replies
May 24, 2009
I'm just getitng started learning Flash CS4(fully updated). I was going through the Flash Downunder tutorials, and creating an interactive player with slider bars to change the 3D X and Y rotation.[code]I get no compile errors (using ActionScript 3.0, BTW) But when testing out the video with Flash PLayer 10 In the publishing settings, the video shows up blank. I thought it may be an issue with windows, but when trying the SWF on a WinXP machine, the same issue occurs.I tried using Flash player 9 in publish settings, and the video plays, but I need to use player 10 to use 3d rotation settings.I'm not sure if this is just a bug with Player 10, or if I'm doing something wrong.
View 11 Replies
Jan 19, 2010
Encoded umlaut characters from xml are not displaying correctly in flash.
Here is my XML part
<answer>
<text>%C3%B6%C3%BC%C3%A4</text>
</answer>
AS3 part
[Code]...
View 9 Replies
Apr 29, 2010
I made a number of Flash Movies during the week on my MACbook using CS4. Today when I open the files to continue building, I do a control movie and/or export movie and all my images display and move as designed but ALL TEXT is invisible. these same files worked fine yesterday. Aside from a shut down, with no issues, at the end of the workday nothing has changed that I can forsee.
When I publish an FLA, I get this message prompt:"Some characters could not be converted to outlines because an appropriate outline font is not available. These characters will disappear in the swf movie file. The characters that failed will look jagged if you choose Anti-Alias Text in the view menu."obviously I tried resetting the preferences and editting the anti alias preferences.. it is happening to all FLA files going back years and versions.
View 10 Replies
Mar 7, 2011
I am making a spin wheel and the hitTestObject doesn't seems to be displaying correctly Basically, there is an arrow (the finger that locate where the wheel stopped) and the wheel itself. The wheel is divided into different segments, and each of these segments can be control by the code. Here's the problem though, my arrow is at the top of the wheel and it only touches 1 of the segment, but whenever I use the hitTestObject method with the arrow and the segments, it somehow detect several segments instead of one. These segments are not overlapping one another so I don't understand why it is detecting several hits instead of one.
View 3 Replies
Jan 11, 2011
I have a problem showing up a SWF file (Flash) in an ASP MVC file.I have problems adjusting the height to 100%. If this is showed in Firefox or Opera the result is the picture you see below (everything works fine under Chrome and IE).[code]
View 1 Replies
Jan 16, 2010
I've created a series of calculations, and I've got that part down. Now, I just need it to show up in the movie.
I've created the dynamic text box in Flash (CS3), but when I hit test, it won't show up.
After all the calculations, I should have a figure that I call totalmoney. My dynamic text box is called total. The user doesn't need to hit anything for it to appear. It just appears as part of the movie.
Here's my code:
stop();
var startDate:Date = new Date(2010,0,12); // use your startyear, startmonth, startdate in the new Date() parameters.var currentDate:Date = new Date(); // assuming user's clock is correct and in your timezone. else use server
[Code]......
View 5 Replies
Apr 7, 2011
I have a button that when clicked it displays a few lines of text. Some of the text is large, bold and some of it is normal and smaller size. The first time I click the button the text displays properly but if I click on it a second time then the text is messed up. I am new to flash and have tried several different things.
View 3 Replies
Nov 30, 2010
I have a dynamic text field that is not displaying foreign characters properly. They appear as boxes.
Here's what I've tried.
Under properties for the text field, I clicked on the embed characters button. In there, I pasted all the special characters I would need and clicked okay. Shouldn't this be enough for the text to display properly?
View 3 Replies
Feb 26, 2012
how I export the thing (as an image, or a movie, and in any format) I can't see the text. This is especially frustrating because text forms the entire basis of my animation.Tried converting text to movie clips, no difference. The weird part is, I was able to test the thing early on with no problem-- text displayed and everything. I should add: I have used MULTIPLE fonts... and I think this was about when things started not working.I'm working on a deadline and if you know how to fix this, it would make a big difference to my life.
View 1 Replies
Oct 28, 2011
I'm having an issue with the PDF displaying outside the viewable area of the mx:HTML control in Flex. When the application starts up - the mx:HTML is set to a certain size, but can be enlarged if the application is maximized. These are the following conditions to replicate it: Issue only happens in Windows (Windows 7, not on Mac) Issue only happens with Reader X installed (not with previous versions) Issue only happens when running the built app, does not happen in debug / development mode from FlashBuilder
[Code]...
View 1 Replies
