I have designed a 768x90 ad in After Effects. My goal is to use that video as a clickable flash ad.
So far I have exported it in the form of an XFL but I really cant figure out how to do the rest. I need to make the whole banner clickable and ready for placement on a website.
I'm new to Flash (CS5.5) but have self taught quite a bit. I created a simple "slide show" model of images which fade in and out to other images—it's a holiday greeting card. How do I save/export/publish (not sure of the correct terminology) this .fla file so that my end result is an image that I can insert (as an image) into an email (outlook) and send. The recipient should be able to click on the image and activate the movie.
View 3 RepliesI created 3 buttons in flash (biography, music, contact). Whenever you hover over them,they animate. Is there a way to make these clickable objects in Dreamweaver? I've searched and found out about the 'invisible button', but this doesn't work for me because it takes away the animation I created.
View 2 RepliesI'm using the code below to place an ad inside a mobile game that I'm building. My problem is that the ad appears in the top left corner of the stage and I need to be able to move it centered near the bottom. I got this code from a book and I understand about 70% of what it's doing.
// Smaato Advertising Code for Start Screen
var request:URLRequest = new URLRequest("http://soma.smaato.com/oapi/reqAd.jsp");
var variables:URLVariables = new URLVariables();[code]....
I've set up a test page in Flash:-
function loadXML(loaded) {
if (loaded) {
_root.resource = this.firstChild.childNodes[2].childNodes[0].firstChild.nodeValue;[code]...
how do I make 'link' clickable in the flash file?
My client is complaining that the site that will be hosting her banner is refusing to add the forwarding link to her banner (that upon clicking will redirect to her website). I'd like to know how I can add this function to the Flash CS5 banner I have designed. Also, I have a clicktag on my banner if that makes a difference.
View 3 RepliesI'm to make a clickable map divided in regions, where it is possible to see some info when you rollover the precisely defined regions, and when you click on that region > go to a specific website. Is it the best way to make this in Flash or are there other or easier ways?
View 1 RepliesJust got started with Flash again after several years of not using it. I am familiar with the layout when I set it to "classic" but for some reason I can see the timeline area, but it is grey and I cannot create any frames or click anything in that area.
View 1 Repliesi want to draw a map of a campus. then when you click on different buildings, the building pops up big (possibly with text alongside it)any links to a tutorial how to do this?
View 8 RepliesI have added an on click event to a child object which is not always displayed Its pearent object also has on click events. There are two problems.
1) Whenever I click on the child object the pearents onclick behavior also runs. I do not want this to happen.
2)The child object can be clicked on even if i set its alpha to 0, or set its display property to false or send it to the back of the stage. This means its behavior can be invoked by the user even if it is not visiable I dont want the child object to be clickable when it is not dispayedI dont want the pearent object to be clickable through the child object
what i am trying to achieve:i need to create a navigation MC that, when rolled over, opens up to reveal a few buttons. (and when rolled off closes the navigation MC - basically a "play backwards" MC)
[Code]...
I have a TileList with movie clips as elements. The MCs contain buttons, but I can't click on the buttons and other elements because TileList is "over" them. How to make buttons clickable? Also, I don't need highlighting in the TileList on rollover and click. How to remove this effect?
View 1 RepliesI am trying to make a brain anatomy game in flash CS3 and I am having some difficulty getting the buttons to respect certain proportions. Allow me to elaborate.
[URL]
And then I bring it into photoshop and make a different layer for each different structure (in the screenshot I only did it for one structure but you get the point)
[URL]
Now what I would like to do is import my .psd file into flash and make every layer a different button. But I don't know of a way to view layers of a .psd file in flash. But here's the bigger problem. As you can see, it makes the "clickable" area for the button a rectangle shape.
[URL]
Whereas I would like for it to be the shape of the specific structure. If the clickable area is a rectangle then there is an overlap onto other structures which is not at all ideal. Especially when I get into smaller structures. What I want is for the button to be exactly like the layer in photoshop.
I have a .png image of all 44 US presidents, I'm trying to figure out how I could break it apart so that each president can be clicked on. I'm a fairly experienced actionscript programmer, have done some game development work in the developer role but never in the design/UI role, thus I'm not great (or even good!) at some of the beginner stuff regarding UI. I was thinking I could use the lasso tool to select an area, then somehow make that selection into a grapic or movie clip symbol, but I can't seem to get that to work and I'm wasting a lot of time experimenting!
View 1 RepliesI have a movie clip (scrollBar) in my site that contains a line of other movie clips moving across the stage (scrollContent1-4). Only two of these are visible at a time, so I have lined them all up, repeated the first two at the end, and have the animation looping.
I want each of the scrollContent1-4 clips to be clickable. It's all fine on the first loop, but once the clip reaches the end and returns to frame 1 the clips are no longer clickable.
So I am working on an interactive piece that requires the use of pre rendered 3D animation clips with transparency. what I was curious about is... Would it be better to export the video as a series of PNGs (the longest is about 600 frames long) and import those into my movie clip or should I export the video as an FLV that is close to 400 Mb in size? Or am I completely missing a a better way to get this pre-rendered animation into my piece as a clickable movie cllip with transparency?
View 2 Replieswhen the embedFonts is removed, it works perfectly as expect. Otherwise when an image is clicked, it selects the whole text around it.
testtext.htmlText="Curabitur dolor eros<a href='event:test'><img src='003.jpg'></a>eget odio.</p>";
testtext.embedFonts=true;
did anyone come across this before? is there another way to make an image clickable inside a dynamically loaded xml text?Alternatively can anyone suggest a method to style dynamic textfields instead of using html?I've tried with many different fonts, and many different stylesheets, its still the same.
I have created a booklet in InDesign cs4 that includes page turn transitions. I have saved it as a SWF file and it works perfectly on my PC with the ability to sweep through the page turns. My issue is now, what type of file can I export the SWF file to so that I can view it on an iPad and am still able to have the page curls?
View 3 RepliesI have a problem with SharedObject. I created SharedObject using AS2.0 it's working fine.... my question is can it possible to store the variable values in an .txt file where the flash file is saved... basically the SharedObject will store the vallues in localdrive with file extention. not only using SharedObject if any other way to store the vaules in .txt file will be helpfull for me... my requirement is to store the the position of the swf file and when the time it reopen, it should start from previous position.
View 2 RepliesI changed a layer entry of my Flash file by moving around various elements within the layer. I sitll have the original file, too. I'd like to put it back exactly like it was in the original file. How do I replace the changed sprite element from the new file with the original from the old file?
View 5 RepliesIs it possible to publish my .fla file to .exe without the File menu and the default Flash icon and Flash tile appearing.
View 1 Repliesi want to know how i can put a flash file inside a flash wbsite. i have found a tutorial [URL] that says something like that but in this tutorial if i understand correctly it creates a new flash project and add another swf inside. i have my website created and i just want to add video gallery, image gallery etc that are already swf. how i can do that?
View 1 RepliesI have been working on a project for a week and suddenly it crashed during save (nothing strange had been imported or anything i just saved after moving content around) and now i cant open my file again. I contacted adobe support who claim that since the problem is related to the file this is not their problem, what a load of HORSE ****, who should i contact about this dell if its an FLA FILE!? I have already renamed the file to flash.zip then opened with WinRar and repaired as a new zip file to a different folder (which removes the corrupt content which is document something.xml) then i tried renaming this folder back to flash.fla however the file still does not open.
View 4 RepliesI'm trying to find out if it's possible to use a .ICO file instead of a .PNG or .JPEG file in my Flash project. Is this even possible? The reason I'm asking is that the project I'm putting together uses ActionScript 2.0 code (not sure if that makes a difference or not) and displays a bunch of images for a bunch of different applications. So instead of creating a .PNG file for each application, since I've already got .ICO files on hand, I'd rather use those (saving me a ton of time).
View 4 Repliestrying to work out why Flash is publishing an unexpected swz file with one recent project. From what I can tell this is an optional run-time library used to reduce file size. My problem is that it is causing all sorts of text formatting grief when I try to import my swf into Adobe Captivate. how I can publish a swf without generating a swz? Why on earth has Flash opted to generate this unexpected file in the first place (assuming user error, but can't work out what I've done)?
View 3 RepliesOn website [url].... you will see a big flash screen and on right 4 small flash images in a small box. How do they make small image clickable to another page? Also how do they have square follow image?
View 1 RepliesIs it possible to load a SWF into another blank SWF file and make it clickable? I have a (parent) flash which has a clickable transparent button on it and i am trying to load another external flash into this to make as clickable.
The external loading is working, but its not clickable. Without the external flash, the parent is clickable.
I was sent an swf ad for my website and when I mouseover it I get the click hand symbol but when I click a page loads with an error saying that the page cannot be found.
I tried to place an a href tag around the entire swf file but I get the same error. Is there a way to fix this without having the flash file?
I'm building a specialized viewer application which loads external SWFs.
var content:Sprite = ...
content.addChild(loader);
I listen to my top level content Sprite MOUSE_OVER and MOUSE_OUT events.The over handler hides default cursor and displays a custom (zoom) cursor.Out handler changes cursor back to default.What I want to achieve is NOT showing the zoom cursor when the mouse is over a clickable item in the externally loaded SWF like a button or textlink.The current code works perfectly for AVM1 swfs.The problem lies with loaded swfs using AS3.For these the content MOUSE_OUT is fired and instantly MOUSE_OVER is fired as well, so the cursor remains wrong.What this probably boils down to is: How to check the mouse is over a clickable child of content?
I asked a conversion question on the Apple forums since I wasn't getting any response on here I am trying to get my flash files over to iMovie without losing quality by converting to a quickmovie file. I was told on the Apple forums to look into a mac file converter. I asked this on there and now I'm asking it on here, hoping for a response this time. Does anyone agree with this method and if so, which file converters are best and are there any good free ones?
View 1 Replies