Pulse Particle Always Going To The Top Level/layer?
May 10, 2009
I'm using the Pulse Particle component to place a random starfield into my client's animation. Problem is as you'll see in this simplified example, I have the particle layer next to the bottom but when you render out the movie, the particles go right to the top layer, no matter what. I tried both this timeline effort and then I tried placing it with AS3 using the addChild method. Neither worked at all. How can I tell this component to only populate to the proper layer/level so the objects above it are seen without any particles?
I have a particle generator class and I want to create a hitTestObject function on another object to check for any collisions with the particles produced.I bascially have a character already on the stage called character_mc and I want to be able to collect the particles, that means when the character touches a particle, the particle disappears.
I'm creating a simple shooter game and I've replaced the mouse cursor with a custom one. It works good but my monsters appear above the cursor. How do I make the cursor always remain on the top most level/layer?
Is it possible to make this a mask? The system contains one movieclip of a circle called ball, also a class called ball and a class called particle. I want the particle system movieclips to display an image...I'm sure this is possible...just have not been able to find a way. A little backround, I'm a completely selftaught n00b when it comes to AS3, but I'm grasping it fairly well... the tutorial is on this website, called A Simple Particle System Using Actionscript 3.
Is there anyone who know how to make a pulse effect. I mean something like a circle on the stage that is growing big and then if it has some dimension it will grow small, and to do that infinitely.
Im new to AS3 , I am taking a class and im kinda having a hard time in it, i have an assignment to do which consist on making an object pulse using a timer , basically the object has to grown and go back to its normal size, like a heart when pumping. some kind of illustration like that, i have to do that and at the same time use a class to make it rotate.
could someone point me in the right direction of how to pulse the opacity property. Math.sin on something and offset and scale the wave to run from 0-1 ?
I have two layers in my FLA both with empty movie clips as follows:In mc_Empty1, I attach a faded background movieclip as I wait for mc_Empty2 to load a SWF. Once the SWF is loaded into mc_Empty2, I want to remove the faded background movieclip from mc_Empty1. When I load the SWF from the main timeline, the onLoad() function works and removes the faded background from mc_Empty1. However, when I load the SWF from mc_target, the SWF loads, but the onLoad() function does not. Here's my AS2 code:
//Loading SWF from main timeline mc_Empty1.attachMovie("mcFadedBg", "mc_FadedBg", 1); mc_Empty2.loadMovie("My.swf");mc_Empty2.onLoad = function():Void{ trace("loaded"); //This works removeMovieClip(mc_Empty1.mc_FadedBg); //This works}
[code]....
I know I'm targeting properly because the SWF loads as it should, but the onLoad() function does not.
This is making me a little kooky today. I thought I could defined a library path in PREFERENCES > ACTIONSCRIPT > ACTIONSCRIPT 3.0 SETTINGS then that library would be available to all AS3 FLA files, but that doesn't seem to work for me. If I use the PUBLISH SETTINGS and define the library path everything is fine.
Is there something that I could have done to disable the application level class path functionality? I guess I'm trying avoid having to set the library path for every new FLA I'm making.
I'm doing a bigger aplication in flash (as2).Image, there is a main "home" flash with several menu buttons.Clicking these buttons, I load external swf into an empty container in this "home" flash.[code]clicking buttons in this second level, will load external movies into an empty container in this SECOND LEVEL swf.This works fine, but now, coming to the THIRD LEVEL (don't think there will be more in the future) problems come up, some scripts won't work.Now (I'm a as2-beginner) I think, loading external swf ALLWAYS into containers in the first "Home" flash should solve the problem.But I don't know, how to load an swf from the third level into a container in the first "home" level.In the "home" level, I have a "close" button, that will unload the container content.I need to go to a certain scene "content_2" in the home swf, too.
i have game im doing, and i want it to jump to level 2 upon completing the first level, but the problem is, the level 2 is a seperate swf, i've tried to use
I have a file1.swf which loads file2.swf into it. Within file2.swf i have a button that when clicked needs to remove file2.swf and load file3.swf into its place.
I am doing some research on creating clcikTags. I read a few places that the clcikTag should be on the top layer. That has been fine, but now I want to loop it and I usually put my actions in the top layer. Will this cause a problem? Am I better off just putting my loop action on the last key frame of the clcikTag layer?
Im creating a program that is designed to allow the used to select 3 pictures (movie clips) and print them off on a single peace of paper.
The program works by allowing the user to select 3 graphics (the graphics are actually instructions for various exercises) and then moving the desired movieclips onto the stage. This all happens on a layer named "Content"
So far the program will allow the user to select the movieclips and will move them into place on the Content layer as well as move smaller versions of the pictures into a preview box the only thing it does not do is print. (the most important bit)
Is it possible to create multiple layer masks over a single layer using Actionscript3?Below is the flash effect I wanted to create with masks.First it starts from A and goes to B and C simultaneously.Then from B it goes to H and D simultaneously (the same applies to C).This is how the end result will look like.ps. I need my background to be transparent. I'm embedding it into a web page later.
I can't seem to go to a master edit file that is supposed to show both the body (layer 1) and wing (layer 2) of a flying bird animation. Is there a way to merge these two since I'm planning on shrinking it down and making a lot of birds?He merged the two layers at 14:24 of the video without even explaining how he went to this so called "Edit Master Movie Clip" that seems non-existent on Adobe Flash CS4.
I want to create a simple mask. A white oval on a second layer on top of a bottom layer that just has a word of type. I want the oval to travel from the upper left down to cover up the type. When I create the second layer, create the oval, and choose a distant frame for the "end" of the oval's positioning, my type in the first layer disappears as soon as I press F6 on that second layer. Why? Why is it nuking my first layer?
I have a container MovieClip called Drags where I can drag stamps (other MovieClips)--they are added to the Drags container via addChild. I have a second container MovieClip above that one (display order-wise) call Paint that contains a bmp, and some sprites used for adding a layer of paint.
My question is this: I need to be able to click on the Paint layer when I am above a draggable MovieClip and trigger the MouseEvent for the correct object to drag it around, but the item must always remain below the Paint layer.
I'm trying to do a little comic comedy type video in Flash. I've done an outline sketch with the pen tool of my first character, now I want to color it BUT I want to keep the colors and the outline sketch separated on two different layers. Is there a way I can select the path (outline) on layer A and then colorize it with the bucket tool on layer B? The problem I'm having is that every object I select it automatically jumps to that corresponding layer.
One reason why I want to do it this way is I still want to continue working freely on the outline sketch since it's not fully finished, so that I just can blend the colors out and keep working on the outline, at the same time I want to color it while I go just to see where it's going and to make sure that I'm not wasting my time unnecessarily with trying to do a outline just to find out that it won't work out at the end.
how to do a comic type animation, how to create the characters, how to make them move and talk? It can be a free or paid resource.
If anyone would please post everything they can about particles and particle systems, including tutorials, source files, links, movies, comments, help, and code, I am trying to learn about particles and particle systems, but I can't fin anything that meets my needs. Please post whatever you can!
i always loves to create aura/particle effects in flash while creating some website, I always use after effect to create them, but it's a little heavy side.I was wondering is there any way to make it lighter in weight so it could faster the loading time?URL...
I am new to actionscript but I am fairly confident in messing around with it. I have been trying to make a particle engine for two days now and I'm at my wits end.
What's funny is, the particle engine works fine. i have piggy backed off of somebody elses particle engine and modified things to how i need them (And stripped it of a few unnessicary things..) what my problem consists of, is I am trying to make the particles go behind another movie clip. this movie clip is a frame (to make it blend in with the webpage it is displayed on) and it must always stay on top depth no matter what to give that affect.
Code: package { import flash.display.*; public class Particle
[code]....
This creates a constant stream of particles flowing from one point on the screen. I don't want the particles to constantly flow out from one point - I want to create a button that causes a set number of particles to explode out from it when it is clicked.
I've got a bunch of modules called "c4" labled red1,red2,red3, etc. And a laser made from particles, with angle controlledby bckspace and enter keys:
onEnterFrame = function(){ for (m=1;m<4;m++){c4 = this["red"+m]; if(robot_mc.laser_mc.lasereye_mc.hitTest(c4.cap)){c4.gotoAndPlay("fram e2"); }
[code]....
The problem I run into is having the collision work with the beam, as opposed to the bounding box that begins with thelasereye_mc. Is there a way to get the c4 to react with the beam, instead of the bounding box around the beam? Or a way to get the photons to interact individually? Also, is there a way to load a particle system through an onEnterFrame without it overloading/oversaturting ?