Actionscript 3 :: Addchild Within Child And Clear The First Child?
May 25, 2010
Within the main timeline I have a menu, which is a MovieClip. This menu is comprised of about 17 "buttons", each of which point to a different section of the site. When a "button" is clicked (2 examples: menu_bag_button, menu_trashbag_button), the menu will animate, moving left, and 2 library items (bag_container and close_btn) should appear to the right, both within "framecontainer".Then, while the menu is on the left, this specific button must not repeat the menu animation, thus I did an if statement finding which frame it is on, and if it's on the left, it simply clears the framecontainer and loads the content again.
The problem is that when another link is clicked, it needs to do one of two things: if the menu is in the center with no content loaded, it needs to animate the menu to the right, and load the content/close_btn into "framecontainer"; or, if the menu is on the left, it needs to clear "framecontainer" and load the corresponding content.I've tried a lot of things but since all of these buttons are within "menu_mc", the actionscript has to point to the root, THEN to"framecontainer" and everything gets convoluted.Here is my current code. It functions fine, except for the fact that it doesn't clear content, so it continues loading the frames so that one is closed, there is still other content behind it:
import flash.display.*;
import fl.transitions.*;
import flash.events.MouseEvent;[code].............
View 1 Replies
Similar Posts:
Mar 10, 2010
var viewStack:ViewStack = new ViewStack();
viewStack.percentWidth = 100;
viewStack.percentHeight = 100;
[Code]....
Its only displaying canVas3 contents not canVas1 and canVas2
View 1 Replies
Mar 25, 2009
I have a picture on the stage that has multiple items that have hotspots/links over them that should open a child swf on top of the background and show details about the items. then have a button in the child swf itself that removes the child from over the background so the user can click on another item etc.I found this code in someone's post and I am trying to modify it so that works for multiple swf files...it currently works for a single swf.I wan to pass the name of the button in front of the .swf in the URLRequest to have the same name as the instance name of the referring button. But I can't figure it out. Here is the code I am using on the stage
View 2 Replies
May 14, 2010
[code]I've marked two locations where this fails in the function pause(). I'm new to Flex/Actionscript/Flash. From what the error says, I assume that from the function, I cannot clea/remove the child loader, because it has a different parent. If I am correct with that, how do I know what the parent is?[code]
View 10 Replies
Jun 11, 2009
I have a package that scales a pic up when the pic is moused over. Also in the .fla that references that package, I have code that loads the pics into movie clips on the stage(using XML).
My problem is that when I mouse over the pic it goes behind the other pics that are next to it. The moused over pic needs to appear above the surrounding pics. I know this is an addChildAt / indexing issue. I'm just having trouble working it into my code.
Actually, the package code (PhotoScaler.as) has a line that is supposed to make the moused over mc go above everything else, but it doesn't work when I add a pic to the symbol
Here is the Package code:
Code:
package AS3code {
import caurina.transitions.Tweener
import flash.display.MovieClip;
import flash.events.MouseEvent;
[Code]....
View 2 Replies
Sep 1, 2010
I'm adding various movieclips to the stage with the following code:var invis_obj = new invisible_li_mc();addChild(invis_obj);However, when I try to access the movieclip such asinvis_obj.buttonMode = true;I get nothing however, something like invis_obj.alpha=0; works fine..
View 7 Replies
May 26, 2010
Everywhere I've looked has instructed me to download plugins and addons because they're "superior." I'm just looking for a simple fade in/fade out when a child is added/deleted (if fadein is all I can get, I'll take it.) Here is a function I'm calling...
[Code]...
View 2 Replies
Dec 13, 2009
I am trying to use addChild to create a child movieclip of one created in another Class. It creates one fine in the testCanvas class but when I want to add a child clip with mctestObject I get nothing.
Code:
package
{
import flash.display.MovieClip;
import test.mctestObject;
[Code].....
View 3 Replies
Jul 21, 2009
"TypeError: Error #2007: Parameter child must be non-null.
at flash.display:isplayObjectContainer/addChild()
at newLFXsite_fla::MainTimeline/onClick()"
so i get this error every time i click on the about page after the homepage appears on screen, from what i know im doing everything right, but i guess theres something wrong that i cant see.
[Code]...
View 2 Replies
Oct 5, 2009
My issue is this: When I call MC1.addChild(MC2), it moves MC2 a few pixels from the location it was originally. I don't want it to move MC2,
View 7 Replies
Oct 23, 2009
I am trying to get a circle shape and a text-field sit inside a square sprite, using addChild() method. Both the children seem not to agree sitting in the lap of their parent; and are sitting at a distance, instead. If I create a square symbol on the stage and run the application, everything is fine.
[Code].....
View 3 Replies
Jul 28, 2009
The code below is called after a thumbnail is generated and available. It is supposed to add the thumbnail to a MC along with the file name. The first go around (after a file is uploaded and converted) works, but the second time around the 2nd MC is generated and placed on stage with the correct file name and thumb image, but the first thumbnail image isappears (the file name stays).I don't understand why.
Code:
function initlistener(e:Event):void{
myURLFILE = "myURL";//reset URL
[code]......
View 2 Replies
Jan 23, 2009
Using Child Navigation to load main time line.I am new to AS3 and have done pretty well but have been caught up this area.I have been loading swfs into a loader (imageLoader) which has been added to the stage using addChild. Then with buttons and functions I load other swfs into the same loader which replace each other. I now have an swf "testProject3a.swf" loaded into (imageLoader) which has icons for navigation and when each icon is clicked I need it to load another swf into (imageLoader) and replace it's self "testProject3a.swf" with "portalB.swf".I've tried adding removeChild code to the loaded swf but it removes the original (imageLoader) and the other buttons have nothing to load into.[code]
View 3 Replies
Aug 21, 2009
in my last flash website i built, i created a gallery, my way of creating pages in flash are to have a movieclip as a page, so to make it easier to switch between the paged (page switching functionality is purely done in AS3). the gallery was a problem however, i needed the pictures to appear as popups, however to add the child from inside the movieclip, any masks i use would prevent the popup from leaving the immediate area of the page. so to get around this problem i basically used: MovieClip(root).addChild()
in my opinion this was a mistake, because it created other problems. the problem was that the popups are still connected to the page, even though they are outside of it, which meant that using removeChild() to switch from the gallery, meant that any popup that were still active, 'DIDNT' dissapear, and worse than that, because the page was removed, the popups lost any AS connected to them, which meant the couldnt be removed at all.
[Code]...
View 2 Replies
Aug 23, 2010
i have problem with swfLoader in flex, when i close following code in click method i can easly add many swf to main application
<mx:VBox id="content" width="100%" height="100%" ></mx:VBox>
public function doIT():void
{[code]....
when i close adding those swfs in loop i have the same error, it looks like child apps couldn't access certain objects that were instantiated by another child app, so what can i do?
View 1 Replies
Aug 18, 2010
I have a movieClip with one frame on the timeline containing one child whose instance name is "myContent"I am using this function to swap "myContent" with any number of possible class instances.
Code:
function setContentAsClass(c:Class)
{
[code].....
View 2 Replies
Mar 19, 2011
I've used this site as a resource leading up to this, not particularly sure if I worded this correctly I have a class "Block" which is just a square (will be something else later on in the process) I want each block to have controls to add an additional block in either direction so I have another class BlockButtons which has my buttons for each direction.
And another class GlobalVar where I keep all my variables for funsies
[Code]...
View 1 Replies
May 10, 2010
I have a component mxml file in which i have a view stack, on click of a button i navigate to the first child, now i need to navigate to the second child during onclick of a button present in the second child. All the childs are component files included within the view stack. How could this be done, Sample code is present below,
[code]...
Now in my offering.mxml file if i try to access navigationViewStack i am getting an error stating 'Access of undefined property navigationViewStack.
View 3 Replies
Mar 11, 2010
I've seen some discussion on how to load a child swf using swfLoader and accessing it's variables but I am wondering if it is possible to do this without adding any code to the child swf.Either accessing public vars or listening for funciton calls would work fine
View 2 Replies
Dec 14, 2010
i'm new to AS3 and i was wondering what is the best way to remove a child at a point. i tried Holder.removeChild(Holder.getObjectsUnderPoint(new Point(exampleX, exampleY))[0]); however that returned ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
View 2 Replies
Dec 16, 2010
I have an Movie Clip in Flash that have subobject of button type which has subobject of input text and movie clips. Right after creation core Moveclip all subobject are set to null, when I expect them to be valid objects.
[Code]...
MC_Core_design was created in Flash and exported to Actionscript. I've done this for button_1 class aswell. The code was written using Flex. When I comment out both lines that result in error I get correct view of the core Movie clip with all subobject. How can I set subobject properties right after object creation?
View 2 Replies
Jul 22, 2009
a quick low down would be its a gallery on the second frame and I breaks when coming back tot he first frame, all tweens die and such.
the errors are:
TypeError: Error #2007: Parameter child must be non-null.
at flash.display:isplayObjectContainer/removeChild()
at index_779_fla::MainTimeline/imageLoaded()
[code]....
View 1 Replies
Aug 21, 2010
I have an issue where removechild won't infact remove a child. I think its something to do with my dropTarget.parent issues. The concept of the code is that you drag a source onto a destination. When you drop the source onto the destination you will get a text field that says "Hello" or "Goodbye". The objective i want to achive is that once i drop a source onto the destination, removechild will remove any previouse textfields added. This is proving difficult.
[Code].....
View 3 Replies
May 12, 2010
I have created 2 sprites each containing a dynamic text field child. I then add this as a child of the stage. (I have done this in order to make the text clickable with a hand cursor on mouseover)It loads in fine, I just run into problems when trying to REMOVE it the sprite containing the text."ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller."Sections concerned in red:
Code:
import fl.transitions.Tween;
import fl.transitions.easing.*;
[code]........
View 2 Replies
Feb 19, 2010
public function GlobalSolutions()
{
Navigation(' Home ', 'index', 235, 0x97F9EC);
Navigation(' Office Supplies ', 'Office_Supplies', 295, 0x97F9EC);
[code]....
I want to remove the appropriate child (e.currentTarget) and create a new child in its place with the next line, but it doesn't work. What do?
View 13 Replies
Oct 14, 2011
I have a parent swf with three buttons: next button, back button, ticker on/off button.I have three child swfs, each with a ticker mc. When I click on ticker button on parent swfit dispatches a custom event which brings ticker MC on stage and thus ticker becomes visible (ticker off button displaces it out of stage by changing the value of ticker_mc.y).
the problem I am facing is when ticker is on and I click next or back button to load next or previous child swf, the ticker goes off. How can I make sure that ticker is on all the time and closes only when I close it. How can a loaded child swf 1 communicate to next child swf, child swf 2, which is currently not loaded, that since the ticker is on on swf 1 so you please keep the ticker on on swf 2 as well?!
I think I know the problem. I have put a default value of ticker_mc = 160 (makes ticker inactive) on every child swf. So, the ticker becomes inactive everytime I load a new child swf. If someone could guide how can I do this, my problem will be solved: When first child swf is loaded, the default value of ticker_mc.y should be 160. I want to hold this value in a variable. When I click ticker active btn, position of ticker_mc changes to 194 so the value of variable should change to 194. When I click next btn, the variable value (160 or 194) should be sent to next child swf and ticker_mc.y should be equal to variable value.
This is the code so far
"Next button"
go_mc.next_btn.addEventListener(MouseEvent.CLICK, playNext);
function playNext(e:MouseEvent):void {
if (swf_no < (clips.length-1)) {
[code]....
View 1 Replies
Nov 23, 2011
mHook -> mBottom -> hItemButton -> itemButton[a] -> itemButtonExp[a]
so i press another butoon, and retrieve a number 2, how do i access itemButton[2].itemButtonExp[2]? Coz i need to change the text field in there?
in AS2 i can access it directly by changing itemButtonExp[a].text, but how do i do it in AS3?
View 3 Replies
Aug 19, 2009
I have a main movie (main.swf). I load child1.swf and child2.swf into it with URLLoader. Is there any way to make a button to child1.swf which would take a user to some frame in timeline of child2.swf?
Something like
parent.child2.goToFrame(5);
I have tried different combinations without luck...
View 8 Replies
Aug 19, 2009
how to remove all child of a movieclip if no of child are not known
View 2 Replies
Dec 9, 2010
I have a main.swf. I have loaded two child-SWFs into it, child1.swf and child2.swf.... There´s a videoclip inside child1.swf, can I stop that video from child2.swf?
View 2 Replies
