I have an object in a Movieclip that I currently have a tween set up for. I set it up on the stage, not with actionscript.I need to dynamically change the duration of this tween. I have not found reference to a way to do this.I don't mind dynamically creating the tween if I need to, setting the initial duration in code, but I still have not found any reference to changing the duration dynamically.
View 2 RepliesI have motion tween made on the stage that follows a custom path. It's a bus going along its route. instead of dragging out the frames to get it to be the right length ( i have multiple bus tweens running) is there a way to export the tween for actionscript or xml and adjust the total duration of the tween as one would a normal tween created in actionscript?
View 1 Repliescan i tween dynamically a movieclip with a change in filters used(as the property parameter in tween). I want to work on blur filter for a movieclip with AS3.0
View 1 Repliesi have a tween function which fades in a display object over time.
when i set my tween duration to 0 nothing happens. isn't the tween suppose to animate in 0 seconds (or frames) to emulate no animation at all?
new Tween(this, "alpha", None.easeOut, 0.0, 1.0, 0, true);
I need to use tween alpha, but I want to change the duration of the tween with some buttons. Does anybody have any suggestion or example?I think that it is possible if I use variable for the duration and create a new Number by each button, but I don't know how. The tween is as below:var TweenPulseA:Tween = new Tween (right_mc, "alpha", None.easeOut, right_mc.alpha, 1, pd, true);
View 8 RepliesIs it possible to tween an object, but have it move along its path without any easing or duration, so it always moves at the same pace. For instance, if the path were looping around the screen, and zig zagging, or w/e it does; it would always go at the same speed, like 2 pixels a second. I use TweenMax.
View 2 RepliesI'm new to actionscript, but here's what I would like to do.I want to have a single animation and two sliders. slider1 will advance and rewind the movieclip,we'll call it "scrubbing", while slider2 will change the highest frame of the mc acheivable by the "scrub" slider1. Therefore if slider2 is at one end slider1 will not advance the mc at all, while if slider2 is maxed out then slider1 will "scrub" the whole movie.
View 1 Repliesis it possible to make the duration of a movieclip equal the duration of the preloader, i mean is it possible to make something like, the time the preloader needs to reach the 100% = the duration of the movieclip? i'm using AS 3.0 and flash CS4 just in case it helps here is my code for the loader:
Code:
loader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, loadProgress);
loader.contentLoaderInfo.addEventListener(Event.COMPLETE, loadComplete);
function loadProgress(event:ProgressEvent):void {
var percentLoaded:Number = event.bytesLoaded/event.bytesTotal;
[code].....
Am trying to use the Tween class to scale and move a movieclip. Now the movieclip is within the loader, so I need the motion to be controlled by the percentage loaded. Now the code to move the movieclip to its final position is:
var xscaletween:Tween = new Tween(mstone, "_xscale", Regular.easeOut, mstone._xscale, 220, 6, true);
But this is the final location, I want to be able to change the properties of xscaletween, yscaletween, xmovetween and ymovetween as per percentage loaded.As in, within this final boundary limit of the tween, I want, for example, xscaletween, to scale only till 140 till percentage hits 50. Is this possible?? If not is there a workaround?Or do I have to use new tweens within each percentage limit?
I'm querying the Rotten Tomatoes API for Upcoming Movies. For each movie returned, I'm creating an instance of MovieIcon (MC). I'm then adding this MC as a child of a Container MovieClip that's already on the scene. Each time, I'm incrementing the xPosition of each MovieIcon MC such that, they're positioned next to each other.My container MC has a mask applied to it, therefore any child objects that are positioned beyond the size of the mask, they're are hidden from view. How can I dynamically add a tween/easing animation between all these MovieIcon MC's so that when I hover over the Container MC, it 'scrolls' left or right, depending on the mouse motion?
View 1 RepliesSo i have a menu. The menu consists of 5 menuitems. When a menuitem is selected it has a gray background. This gray background will animate smoothly between the menuitems on selection. I have a movie clip of this node morphing through 5 keyframes to each menuitem. [URL] What i'm wondering is: Is there an easy way to dynamically tween between two frames, prefferably with some easing in/out.
View 0 RepliesThey dynamically motion tween the movement to each lot. I am trying to achieve the same thing. At the moment I have a map with a similar capability, but mine "snaps" to the selected area, rather than animating to the selected area.My file can be viewed at
View 4 RepliesI'm a few days into learning flash AS3 and I'm stuck. So i have movie clip that is made up of smaller clips, and I want to change the opacity of one of the sub clips. Here's my code so far
//MOUSE OVER EVENTS FOR PORTFOLIO ENTRIES
function entryOver(evtObj:MouseEvent):void
{
[code].....
I have a working AS2 banner that loads in an array of images into a movieclip using flashvars and then cycles through these (there's no limit on the array length).
Unforunately, the images couldn't alpha tween into eachother as the AS2 script needs to be seperated onto sperate keyframes in order to count through the array.
I've created another movieclip which loads in the 'next' image in the array, so that when the current image fades down, the next fades up.
So to break down:
bannerContainer_mc - loads current image
nextContainer_mc - loads next image
Unfortunately when the timeline loops to the start again, bannerContainer_mc loads in the image which was previously loaded into nextContainer_mc. This creates a 'jolt' in the animation as the same image is re-loaded.
Is there any way of perhaps caching nextContainer_mc at the end of the banner sequence, to save loading it again in bannerContainer_mc?
I have a flash project where different movie clips are loaded dynamically according to the data retrieved from an XML file. And they are positioned one after the other as if they were in a menu. Inside those movieclips there is a button that when it's triggered unloads the movieclip so it disappears from the menu/list. Apart from that, I would like the rest of the attached movie clips to tween and move upwards, so the list keeps its form. I'm finding quite difficult figuring out this function. I'm copying the code I'm using :
Code:
var numOfItems: Number;
var i: Number;
[code].....
I am currently using CS4 but taking a class that is using CS3. The problem is I am finding the "motion tween" is not creating a tween. What is the difference between the motion tween in CS3 and CS4.I can get the tween to work if I use the "classic tween" but the instructor is saying I must use the motion tween.
View 4 RepliesI'm getting an "1120:Access of undefined property module_mc" on this line of code, which is on frame 111:
[Code]...
modules_mc is created, I can see it. So I don't understand why Flash thinks it's not there..
I've found a really basic gallery and I'm modifying it. It did show a bar with thumbs on top of the stage with no full image shown at first. Clicking on a thumb, with a tween, the thumbs' bar disappear and the full image appears, clicking on the full image the gallery come back to the original situation. I've modified the gallery and now it shows the bar on the bottom, a full image is shown as the gallery appears and when I click on a thumb the bar stays at its place, in addition the shown image disappears to leave the place to the new one.
I want to add a tween when the full image changes, a fade out on the old image and a fade in on the new one, but I can't understand where and how to modify the code. I post a link to the gallery files, the one to modify is createThumb.as [URL]
I'm trying to create a Motion Tween where at a certain point the initial image it's replaced by another one.I've tryied to do "Swap Symbol" but the symbol changes in all the tween.
View 1 RepliesI have a dynamic tween within a function, which basically makes a movie clip visible,after it had been made invisible by another tween call.Code to make clip invisible:
function imgopen(){
var fholderDark:Tween = new Tween(this.mc_load1360.folioholdermc, "_alpha", Regular.easeOut, 100, 0, 1, true);
[code].....
How can I change the saturation and brightness of a picture using a tween ?
View 1 RepliesI've created a symbol and motion tween and given an instance name to the tween (lets call it mt1) on Layer 1, frame 1 - frame 10. On layer 2, frame 1 I create a button and stop and add the MouseEvent hander and function. Can I, from the function on layer 2, alter the end point of the motion tween on layer 1 via the function? I've tried, but unsuccessfully. Can't seem to access the tween properly. Or I am way off base. Here's the Actionscript frame 1, layer 2:
[Code]....
this might be an easy question but i have not found the answer. i want a MC to move vertically upwards and then stop. i have the code below but this tweens downwards. i tried changing the -30 value but it doesn't seem to change the starting point. import mx.transitions.Tween; import mx.transitions.easing.*; var xPosT:Tween = new Tween(kText,"_y", Bounce.easeOut, -30, 56, 3, true);}; xPosT.onMotionFinished = function() {};
View 3 RepliesThe _currentframe property is readonly, so how do i tween between keyframes in a movieclip?
View 3 Repliesimport fl.transitions.Tween;
import fl.transitions.easing.*;
var homemanTween:Tween = new Tween(homeman_mc, "x", Elastic.easeOut, 1000, 50, 3, true);//frist tween
var adobeTween:Tween = new Tween(adobe_mc, "alpha", Regular.easeOut, 0, 1, 3, true);//second tween
how can I animate the 2nd tween after 3 seconds when 1st tween stops.
I have a Movie Clip which consists of a text-box with some text in it.I am trying to tween this movie clip so it either moves randomly throughout the animation or have the movie clip bounce off the edges similar to a standard screen saver you might see. While slowly changing it's text through many different font families Is it possible to have a movie clip tween randomly through an animation and is it possible to change the text to many different families in a slow transition.
View 1 RepliesIs it possible to add dynamically an button or graphic symbol into some area ?Let's say i have two buttons, and in particular case i would like to display first button in that area and another time i would like to replace that button with second or another graphic.
View 2 Replies[code]....
need a way to change from tile0 to tile1 through variable [code]....
How do I go about changing my movie height on a certain frame on the timeline?
View 10 Replieshow to change the 3D centerpoint dynamically? In the flash IDE you can use the 3D rotation tool and easallydrag the 3D centerpoint. You can see the new position in the transform panel.I read a lot of forums and website.. and dit some coding, but with no result.I tried to do it this way:
var pp1:PerspectiveProjection = new PerspectiveProjection();pp1.fieldOfView=35;pp1.projectionCenter = new Point(-mybitmap.width/2, -mybitmap.width/2);mybitmap.transform.perspectiveProjection = pp1;
[code].....