ActionScript 2.0 :: Tween The Position Of Dynamically Loaded Movieclips?
Aug 7, 2008
I have a flash project where different movie clips are loaded dynamically according to the data retrieved from an XML file. And they are positioned one after the other as if they were in a menu. Inside those movieclips there is a button that when it's triggered unloads the movieclip so it disappears from the menu/list. Apart from that, I would like the rest of the attached movie clips to tween and move upwards, so the list keeps its form. I'm finding quite difficult figuring out this function. I'm copying the code I'm using :
Code:
var numOfItems: Number;
var i: Number;
[code].....
View 2 Replies
Similar Posts:
Aug 1, 2011
I use the following code to load some banners: a "banner" is a clickable PNG image. I get the URL it must point to through a parameter of the AdLoader class.
package
{
import flash.display.MovieClip;
import flash.display.Loader;
[Code].....
In practice, I create some MovieClip containers (loader_1, loader_2, etc.) and in each container I want to load one image.
What happens: when the images are loaded I want to position each image at the y+10 pixel of the preceding, so if the first is at y:0 and its height is 140, I want the second image at y:150 (and so on). I can't understand what it happens but sometimes the code works, while most of the time it doesn't.
View 1 Replies
May 14, 2009
I have a working AS2 banner that loads in an array of images into a movieclip using flashvars and then cycles through these (there's no limit on the array length).
Unforunately, the images couldn't alpha tween into eachother as the AS2 script needs to be seperated onto sperate keyframes in order to count through the array.
I've created another movieclip which loads in the 'next' image in the array, so that when the current image fades down, the next fades up.
So to break down:
bannerContainer_mc - loads current image
nextContainer_mc - loads next image
Unfortunately when the timeline loops to the start again, bannerContainer_mc loads in the image which was previously loaded into nextContainer_mc. This creates a 'jolt' in the animation as the same image is re-loaded.
Is there any way of perhaps caching nextContainer_mc at the end of the banner sequence, to save loading it again in bannerContainer_mc?
View 1 Replies
Apr 19, 2005
I'm trying to get a dynamically loaded swf to load into an empty mc behind a particular mc on the stage. I used actionscript to create an empty movie clip using the createEmptyMovieClip command. But, how can i get it to create it, then load the external .swf into it behind a exsisting mc on the stage?
View 1 Replies
Aug 18, 2010
I'm trying to name the instances of MovieClips that I dynamically load.
I tried doing this:
comp = new Comp();
// and also tried doing this--> var comp:MovieClip = new Comp();
comp.name = "comp"; // comp is the name I want the instance to be
[Code]....
View 3 Replies
Mar 31, 2010
How to load a series of images locally from a folder and create a movie clip for each one dynamically?
View 2 Replies
Jan 3, 2007
I have a script that loads images and text from an XML file into movieclips.The following code is what creates the movieclips that contain the elements:
Code:
var thumb_mc:MovieClip = _root.mc_conteudo.createEmptyMovieClip("thumb"+(1+i), _root.mc_conteudo.getNextHighestDepth());
var img_mc:MovieClip = thumb_mc.createEmptyMovieClip("img", 0);
I can't seem to find a way to target the thumb_mc or the img_mc so they have rollover effects and actions (they are created for each set in the xml file, so there are multiple mc's)mc_conteudo is the content mc that scrolls.The swf is here: http:[url].....
View 13 Replies
Mar 3, 2008
I am using attachMovie in a for(var i=1; i<50; i++) loop.Everything loads fine, but I am having difficulty referencing the dynamically created instance names.I don't want to reference individually ie movieclip1, movieclip2 etc.but more by movieclip[i].Basically - if movieclip instance 1 is rolled over I want to display image 1, and so on?
View 2 Replies
Jan 21, 2009
I've created a drop down list and populated it with dynamic buttons. (I made a DropDown_btn class with a dynamic text field in it and then filled the button text from an xml file). On rollover I tint the button blue and then set the tint back to black on rollout. When you click on the button I'd like it to stay blue until a different button is clicked.
I thought on CLICK I'd run a function like this:
ActionScript Code:
function removeRollover(evt:MouseEvent):void {
evt.target.transform.colorTransform=c;
evt.target.removeEventListener(MouseEvent.ROLL_OUT, btnOut);
evt.target.removeEventListener(MouseEvent.ROLL_OVER, btnOver);
}
...and then I need to addEventListeners back to any button that doesn't have them and set that button back to black. I could do this by looping through an array of the buttons but I can't figure out how to access them as objects.
I also gave them each a property of "buttonValue" when I loaded them so I can access event.currentTarget.buttonValue (which in this case is a number from 1-5) but once again I can't figure out how I might leverage this information.
View 2 Replies
Apr 29, 2008
I'm trying to place 5 instances of a horizontal line (mcLine) starting at 78% from the top of the Stage. This all works fine, but I want to be able to have these dynamically created MovieClip instances register mouse events and they don't.First the setup of the mcLine instances:
var nFirstLineY:Number = (Math.round(Stage.height*.78));
var nLineSpace:Number = 22;
var nWaitTime:Number = 1000;[code]...
If I place instances of the mcLine MovieClip on the stage and name them line_1, line_2, etc., the function LineVibrate works, but when I try to add the instances at run time as above, the LineVibrate function stops working.
View 4 Replies
Mar 22, 2010
i'm new to action script 2.0 and i want to create a movie clip dynamically whose position and dimensions are changed in each frame as loaded from xml;
[Code]...
the position and dimension are changed but the problem is the last dimensions are not removed and it get bigger n bigger
View 1 Replies
Mar 17, 2011
I am working on to slide a movieclip across the stage.The movie clip is five times the width of the stage and I am using the Tween Class to move it across the stage when a button is pressed.The interaction I want is that when the button is pressed the movie clip moves a certain amount.If the button is pressed again it moves further.The script I have come up with though is taking the movieclip back to the original position of the movieclip and then moving it as opposed to moving it from the position it reached after the first button click.I have tried a few things but nothing is working.The script I am using at present is:[code]
View 5 Replies
Oct 27, 2009
I am trying to understand the thinking behind motion tweening using AS3 (rather than doing it on the timeline).I am trying to create a simple platform game, and while this is simply a learning project, I have an movieclip instance on the stage, and using basic x+5 logic I can get the instance to move left and right on the stage accordingly.Trying to make the instance 'jump' is a bit trickier. This is the code I am using:
ActionScript Code:
import fl.transitions.Tween;
import fl.transitions.easing.*;
import fl.transitions.TweenEvent;[code].....
I thought this code would move the instance from it's current y-position and tween it to it's highest jump point. From here I planned to use a MOTION.FINISH event to tell it to tween back to it's original position.Something strage happens though, rather than tween from the current y position and move up, the instance instantly transforms it's position to y+100 and then tween back to the original position. So it kind of turns out that it is the second part of the jumping action that I want to create.
View 2 Replies
Jan 23, 2010
I have a tween set on a timer:
var manTimer:Timer = new Timer(1000,14);
manTimer.addEventListener(TimerEvent.TIMER, moveMan);
function moveMan(e:TimerEvent):void {[code]....
I just need to make the tween's position relative to it's current position, as opposed to starting at the stage's 0 position then moving the the stage's -40 position. It needs to start at its current position the move -40 from that position.
View 1 Replies
Mar 28, 2010
tween from one position to mouse position
View 1 Replies
Aug 6, 2010
I m trying to make sense of how to load a swf into a parent MovieClip and allow them to communicate.I ve attached two zip files � one which works fine and the other doesn�t. Unfortunately (for me), the one which doesn�t work is closer to my current project.I need to load movieclips into the parent movieclip. The parent movieclip has controls which rely on values parsed from the child movieclip.In the parent movieclips I wait until the loading is complete and so the values should be passed. However, the values aren�t passed unless I use a button (or timer), to pass the values (see the working exampes).The code which doesn�t work is:
Parent movieclip:
ActionScript Code:
stop();
var myLoader:Loader = new Loader();[code].............
View 5 Replies
Feb 18, 2009
Why do my object movement is different if I use a tween to move it ?
I'm inside a for cycle, and I use arrays for all my variables.
[Code]...
View 0 Replies
Nov 26, 2009
I've got a movieclip which I am tweening around the stage to various positions, depending on what buttons the user presses.My problem is, that currently each time the user presses a button, the movie clip shoots back to it's original position (placed on the time line), then tweens to the new position dictated by the button.
This is not what I want..I actually want the movie clip to tween from position to postition (not shoot back to it's original position each time).. I guess I need it to remember where the movie clip currently is, and then move to the new position..
here is my code for the tween..
Code:
import mx.transitions.Tween;
import mx.transitions.easing.*;
ButtonOne.onRelease = function() {
[code]....
View 5 Replies
Mar 10, 2010
Do you know how to rewind a tween. but I dont want it to just snap back to the beiginning. I want it to yoyo back to the beingining without actually yoyoing many times. you know what I mean?this is the code I have which make the beginning motion I want:
public function imageSelectR(e:MouseEvent):void {
myTween = new Tween(imageLoaderHost, "z", Regular.easeInOut, 0, -100, 1, true);
myTween.addEventListener(TweenEvent.MOTION_FINISH, imageSelectL);
[code]...
View 2 Replies
Feb 4, 2011
I'm working on a AS3 and Box2D game with moving platforms. The platforms are animated in Flash, and in actionscript I can read in their current position and adjust the physics bodies to match.However, there's always a delay, where the animation is one frame ahead of the physics. I wanted to fix this by reading in the clip's current position, storing it for later, and then putting the clip back to its position at the last frame.
But when I do this, it systematically refuses to budge. I coded up a simple test with a single moving box to test the idea, and I get the same problem ("movingBox" is a symbol that animates a single "box" symbol within it):
package
{
import flash.display.*;
import flash.events.*;[code].............
View 1 Replies
Dec 22, 2007
how can you tween so that an object changes it's shape instead of position..
View 1 Replies
Jan 12, 2009
i am trying to change the position while the yoyo is working but the tween object goes to the new position and then back to the old position and continuing to yoyo.
ActionScript Code:
import mx.transitions.Tween;
import mx.transitions.easing.*;
var swing:Tween = new Tween(swingObj, "_rotation", Regular.easeInOut, 60, -60, 2, true);
[code]....
View 2 Replies
May 12, 2011
I'm trying to make some manual transitions. Because I don't know AS3, and I'm building this from the help of Google, I've started with a simple "blind" transition just to figure out the works.
The issue is that when I expand the width, it seems as though all my AS3 created sprites seem to reset their x position, and sit on the left. That or 15 of the tweens aren't working.
Here's the code:
ActionScript Code:
function vBlinds(){
var tweens:Array=new Array(16);
[code]....
View 3 Replies
Oct 14, 2009
I want to know how do you get the current x position value of the tween object during the animation? I want to move a movieclip across the stage, but at a certain x position, i.e. x=600, a new movieclip is added to the stage and chases behind the first one. My current code looks like this:
[Code]...
View 4 Replies
Jul 5, 2007
I'm loading an external swf that is a button to close other loaded movies. I want it to stay above all the other movies at all times so that the user has a way to close them and go back to the main stage. There are buttons on the stage that load external movies and the close button movie loads automatically. All of the movies load in fine but once I load in a movie from a dynamically created movieclip button on the stage, it covers up the close button movie.The following code is where I dynamically load movies from the dynamic movieclip buttons and then after that is where I load in the external swf for the close button.
//Dynamically assign external movies to load from
//the dynamic buttons
for (j=1; j<holderArray.length; j++) {
[code]...
View 1 Replies
Sep 10, 2010
In actionscript3,using the ScrollPane component and the TweenLite package, would it be possible to animate to a particular scroll position?
View 2 Replies
Jun 28, 2011
I'm trying to shape tween a movie clip of a rocket blasting off. I want it to "squash" before liftoff, and then "stretch" as it lifts off. When I tween this on the timeline with the transform tool, I can "squash" the rocket, and the base of the rocket stays on the "ground". This is what I want. However, for reasons I won't go into, I need to do this in AS3, as opposed to on the timeline. When I use a "height" tween, though, the movieclip height changes, but it shrinks/stretches at the bottom (locked at the top). Is it possible to do what I want with the tween class? Do I need to use something besides "height"?
[Code]...
View 3 Replies
Mar 14, 2009
I hav movieclips in a flash document that i have autocenter when the stage is scaled code is something like this:
clients_mc.y = Math.round((stage.stageHeight/2)-15);
stage.addEventListener(Event.RESIZE, resizeClients);
function resizeClients(event = null){
clients_mc.y = Math.round((stage.stageHeight/2)-15);
};
any way to make it esae in to position or bounce, something?
View 4 Replies
Apr 30, 2009
When I mouseover the square and it expands and when I mouseout the square it should shrink back to its original position. The expandSquare works but the shrinkSquare doesn't.[code]
View 2 Replies
Sep 23, 2010
I really like the new tweens and motion panel that Flash added in CS4 but I'm having some problems with them that I cant find a solution to.
1. When I animate or apply a preset animation it changes the position slightly. I do work where I need things positioned exactly where I put them. For example X:70 Y:210 but when I animate it might for example change it to X:70 Y:210.5 and to make it more confusing even if I animate a group of them at the same time it only does this to some things and not all. Also if I try to change the position back manually it doesnt always let me in the properties panel. I have to go to the Motion Editor and change it there frame by frame.
2. Similar problem to above but with the Alpha property. I want to animate things where it fades on and then stays up for a few frames and then animates back off. When I try to do this using the properties panel it doesnt always let me. So for example I need my alpha values to be in this order for the 4 keyframes. 0, 100, 100, 0. But for the 0 it might force it to 3% instead of the 0 I need. Again I can only fix this by going to the Motion Editor and adjusting it frame by frame.
View 1 Replies
