i am trying to change the position while the yoyo is working but the tween object goes to the new position and then back to the old position and continuing to yoyo.
ActionScript Code:
import mx.transitions.Tween;
import mx.transitions.easing.*;
var swing:Tween = new Tween(swingObj, "_rotation", Regular.easeInOut, 60, -60, 2, true);
[code]....
I am trying to understand the thinking behind motion tweening using AS3 (rather than doing it on the timeline).I am trying to create a simple platform game, and while this is simply a learning project, I have an movieclip instance on the stage, and using basic x+5 logic I can get the instance to move left and right on the stage accordingly.Trying to make the instance 'jump' is a bit trickier. This is the code I am using:
ActionScript Code:
import fl.transitions.Tween;
import fl.transitions.easing.*;
import fl.transitions.TweenEvent;[code].....
I thought this code would move the instance from it's current y-position and tween it to it's highest jump point. From here I planned to use a MOTION.FINISH event to tell it to tween back to it's original position.Something strage happens though, rather than tween from the current y position and move up, the instance instantly transforms it's position to y+100 and then tween back to the original position. So it kind of turns out that it is the second part of the jumping action that I want to create.
I've got a property, var angleX:Number; declared right after my class declaration (therefore available to each function in the class). How do I go about tweening this value with Tweener? Specifically, I'm trying to do it in a mouse press event but am stumped by the object i need to pass - the keyword "this" isn't working.
[Code]....
When I mouseover the square and it expands and when I mouseout the square it should shrink back to its original position. The expandSquare works but the shrinkSquare doesn't.[code]
View 2 RepliesI'm wondering if there are numerical limits for the values you can manipulate using the tween class.I am importing mx transitions and using them to manipulate the _xscale and _yscale of a movie clip.. If I understand correct.. x and y scale property is measured in percentage..
is there a limitation on the value I can plug in?
Can I scale.. say.... 1,000,000% (million)
how about 100,000,000,000 !!! (one hundred trillion)
How about limits on _x and _y position values..?to quell any curiosity, I'm essentially trying to control a movie clip that has the appearance of 'zooming' in with button clicks by increasing the scale..
if there is a way to use the _rotation property with the Tweening class to make a movie clip continually to rotate from it's current position instead of starting back at the original position and doing the same rotation again.
I'm trying to make an movie object rotate 90 degrees by clicking on a button and then when you click the button again, the movie rotates 90 more degrees. I don't want it to start over and do that same 90 degree rotation with the Tween class.
I've been working on a bit big project. I've some components on the stage. There are basically 4 frames. Each frame has some components. What I've done is, I've used tween class. Workflow is something like this:
Frame 1:--used Tween class to get fade effect for List component.--used Tween.MOTION_FINISH event to fire an event when it is finished.--when it is finished, applied eventListener--on Change event, remove eventListeners and use Tween class again to get reverse fade effect.--again used Tween.MOTION_FINISH event to fire an event when finished.--in that evenHandler, gotoAndStop(2);
Frame 2://similar
Frame 3://similar
and so on.. now, what happens, is, if i play with my scene, sometimes tween class failed to work. sometimes it does not display List component, sometimes it displays List component with alpha 0.2. sometimes it happens with movieClip also. Is it flash bug or problem with my code?
i have inserted on stage through attachmovie a mc and copied 6 times through the cycle for. . now through the class filter I have assigned for everyone the effect always through the cilo for, but I do not succeed to assign transition that is to the effect movement of the filter glow to all the mc for all the rollOut and rollOver works (this is looked at from the small hand and trace) but the every time that step small hand on whichever only mc to a part the transition of the effect�now i show the code of my fla files that is in first frame...
Code:
import flash.filters.GlowFilter;
/*import flash.filters.*;*/
import mx.transitions.Tween;
import mx.transitions.easing.*;
[code]....
I downloaded an Mc Tween Class from [URl] so I can use the ColorTransformTo method. However, the method only works when my movieclip is an image; and I need the method to work when the movie clip is a shape...
View 1 RepliesI am working on to slide a movieclip across the stage.The movie clip is five times the width of the stage and I am using the Tween Class to move it across the stage when a button is pressed.The interaction I want is that when the button is pressed the movie clip moves a certain amount.If the button is pressed again it moves further.The script I have come up with though is taking the movieclip back to the original position of the movieclip and then moving it as opposed to moving it from the position it reached after the first button click.I have tried a few things but nothing is working.The script I am using at present is:[code]
View 5 RepliesI have a tween set on a timer:
var manTimer:Timer = new Timer(1000,14);
manTimer.addEventListener(TimerEvent.TIMER, moveMan);
function moveMan(e:TimerEvent):void {[code]....
I just need to make the tween's position relative to it's current position, as opposed to starting at the stage's 0 position then moving the the stage's -40 position. It needs to start at its current position the move -40 from that position.
tween from one position to mouse position
View 1 RepliesNow I am using the Tween Class to move some boxes in my movie, now I can move the first mc and then another mc after the first tween has finished with onMotionFinished but I was hoping someone could help with how do I start the second tween when the first mc has passed a certain _x coordinate. ie starting the second mc moving while the first tween is still moving.
View 1 RepliesIf i have a clip with a bunch of stuff inside it (on layers) like other clips, bitmaps, etc. and perform a tween on that clip (via tween class), the stuff inside the clip seems to alpha at different rates.
For instance, i have a clip with an empty movieclip which loads a bitmap image and on top of the bitmap image, i have a gradient feathered edge (.png) bitmap and on top of that I have some dynamic text (embedded fonts).
The bitmap is supposed to create a feathered edge on the photo but since they alpha at different rates, you always see the hard edge of the photo...
is there a solution like cacheAsBitmap which would let the whole clip alpha at once? If it's cacheAsBitmap, i must be using it incorrectly, b/c it's not working!
Am trying to use the Tween class to scale and move a movieclip. Now the movieclip is within the loader, so I need the motion to be controlled by the percentage loaded. Now the code to move the movieclip to its final position is:
var xscaletween:Tween = new Tween(mstone, "_xscale", Regular.easeOut, mstone._xscale, 220, 6, true);
But this is the final location, I want to be able to change the properties of xscaletween, yscaletween, xmovetween and ymovetween as per percentage loaded.As in, within this final boundary limit of the tween, I want, for example, xscaletween, to scale only till 140 till percentage hits 50. Is this possible?? If not is there a workaround?Or do I have to use new tweens within each percentage limit?
Lately i discovered MATE (for Flex development) and was wondering: how do i bind a property in a view (actually a navigatorcontent component) to another property in a class so that they stay in synchronization (meaning that whenever the property in the class changes the property in the view also changes).
So if we have a view called Target.mxml and a property targertProp how do we bind it to the class called SourceClass with property SourceProp?
Is there any way to make a movie clip start at a given x and y point, and ends at another x and y point, in 90 seconds?m not getting a good result.The main problem is, I want the movie clip to travel along a straight line. And by this code below the "b" movie clips makes some curves.Heres what Ive done.
"p" is point movie clip
"b" is ball movie clip
fullTime = 90000;_currentTime = fullTime;oldTime = undefined;onEnterFrame = function () {if
[code]........
If you try to make a movie clip travel along a rectangle diagonal within 90 seconds, the movie clip makes some curves.
View 5 RepliesWhat I want to do is tween a number from lets say 0 to 50 using the Tween class. The below is an example of my tween but it wasn't working (*NOTE* i'm using TweenExtended but if you change the tween to Tween only it will be the same thing, i just have a habit of using the TweenExtended class):
[Code]...
Why do my object movement is different if I use a tween to move it ?
I'm inside a for cycle, and I use arrays for all my variables.
[Code]...
I've got a movieclip which I am tweening around the stage to various positions, depending on what buttons the user presses.My problem is, that currently each time the user presses a button, the movie clip shoots back to it's original position (placed on the time line), then tweens to the new position dictated by the button.
This is not what I want..I actually want the movie clip to tween from position to postition (not shoot back to it's original position each time).. I guess I need it to remember where the movie clip currently is, and then move to the new position..
here is my code for the tween..
Code:
import mx.transitions.Tween;
import mx.transitions.easing.*;
ButtonOne.onRelease = function() {
[code]....
Do you know how to rewind a tween. but I dont want it to just snap back to the beiginning. I want it to yoyo back to the beingining without actually yoyoing many times. you know what I mean?this is the code I have which make the beginning motion I want:
public function imageSelectR(e:MouseEvent):void {
myTween = new Tween(imageLoaderHost, "z", Regular.easeInOut, 0, -100, 1, true);
myTween.addEventListener(TweenEvent.MOTION_FINISH, imageSelectL);
[code]...
I'm working on a AS3 and Box2D game with moving platforms. The platforms are animated in Flash, and in actionscript I can read in their current position and adjust the physics bodies to match.However, there's always a delay, where the animation is one frame ahead of the physics. I wanted to fix this by reading in the clip's current position, storing it for later, and then putting the clip back to its position at the last frame.
But when I do this, it systematically refuses to budge. I coded up a simple test with a single moving box to test the idea, and I get the same problem ("movingBox" is a symbol that animates a single "box" symbol within it):
package
{
import flash.display.*;
import flash.events.*;[code].............
how can you tween so that an object changes it's shape instead of position..
View 1 RepliesIs there a way to tween the set property actions?For example, I have a button that reduces the size of a box by 50%... but instead of making that box just snap to 50% its size, is there a way it can shape tween slowly until it reached the ideal size.
View 4 RepliesIs there a way to tween the set property actions?
For example, I have a button that reduces the size of a box by 50%... but instead of making that box just snap to 50% its size, is there a way it can shape tween slowly until it reached the ideal size.
I'm trying to make some manual transitions. Because I don't know AS3, and I'm building this from the help of Google, I've started with a simple "blind" transition just to figure out the works.
The issue is that when I expand the width, it seems as though all my AS3 created sprites seem to reset their x position, and sit on the left. That or 15 of the tweens aren't working.
Here's the code:
ActionScript Code:
function vBlinds(){
var tweens:Array=new Array(16);
[code]....
I have a flash project where different movie clips are loaded dynamically according to the data retrieved from an XML file. And they are positioned one after the other as if they were in a menu. Inside those movieclips there is a button that when it's triggered unloads the movieclip so it disappears from the menu/list. Apart from that, I would like the rest of the attached movie clips to tween and move upwards, so the list keeps its form. I'm finding quite difficult figuring out this function. I'm copying the code I'm using :
Code:
var numOfItems: Number;
var i: Number;
[code].....
I want to know how do you get the current x position value of the tween object during the animation? I want to move a movieclip across the stage, but at a certain x position, i.e. x=600, a new movieclip is added to the stage and chases behind the first one. My current code looks like this:
[Code]...
I have a button that I want to immediately go to full alpha and a tween that slides it out gently on rollover. The problem is that the alpha is only set for a second and then it goes back to .5 alpha. It seems like the alpha is only set for the first frame in the tween and then goes away as the tween executes the rest of the frames/seconds. How can I make the alpha instantly 100% and then remain for the remainder of the mouseover?
[Code]...
