i want to control sound in my movie clip by the button which i designed in flash. for ex.: my default sound is 100% on home button & when i click on contact(last button) the volume level goes to 20% same as in between buttons.i use this script to call the sound in flash
bgSound = new Sound(this);
bgSound.attachSound("sound1");
bgSound.start(0,99);
now tell me what i put in buttons to manage sound level.
Is there a way to configure/control the volume level of an mp3 that automatically plays in your flash segment? In other words I'd like for the volume to play at a 30 or 50% level.
View 6 RepliesI want to get the activity level of audio of a NetStream, similar to how you can do it with a Microphone.In this article,
[Code]...
Let's say I have a slider that can go between 0 and 1.The SoundTransform.volume also ranges between 0 (silent) and 1 (full volume),but if I use a linear function,let's say SoundTransform. volume = slider.volume, the result is rather not pleasing.I really haven't studied the human ear,but I overheard once that human perception is logarithmic, or something similar. What algorithms should I use for setting the SoundTransform.volume?
View 7 RepliesI have this code where the player can set their volume;
var my_sound:Sound = new Sound();
my_sound.loadSound("C://Documents and Settings/me.my-comp/My Documents/My Music/Unknown Artist/Unknown Album (8-09-2004 10-55-17 AM)/my_song.mp3", true);
this.createEmptyMovieClip("knob_mc", this.getNextHighestDepth(),0,0,140,64);
knob_mc.left = knob_mc._x;
knob_mc.right = knob_mc.left+100;
[Code] .....
OK, now the catch, this code works fine, however, how would I make it possible for the volume level to be retrieved in another frame and all the sounds in that frame are played at the set volume??
i've got a MC named 'enterBtn', i want the volume of 'crowd.wav' to increase when the mouse moves towards 'enterBtn' and decrease when moving away. i don't know if this helps, but the co-ordinates of enterBtn are x =530, y = 344.
[Code]...
I am completely new to this with flash and action script. I checked the Flash MP3 Player tutorial and I wonder how I'm doing a previous button and a volume scrolling button in action script?
View 1 RepliesI've created a small music player with a sliding volume control. I'm having trouble with the volume. Though it does control volume properly, if I set the initial volume to less than 100%, the volume always starts at 100% until I move my mouse over the player. At that point, the volume changes to whatever the initial volume is set to.Is this a flash bug, or am I missing something? Here is the affected code (code for other buttons/functions omitted for brevity):
var song_initvolume:Number = 100;
slider_1._x = groove_1._x + song_initvolume;
playSong(0,song_play);[code]....
I'd like to be able to set the volume at say 50%, but the above mentioned behavior happens each time.
I'm building a video player and am kinda stuck at the volume slider part. It's a YouTube style vertical slider, meaning if the slider is in the top position volume should be 100% and if the slider is dragged to the bottom position sound should be 0. Currently it's doing the opposite of what I want :(
Dragging the slider down will make the sound louder, while dragging up lowers it.
Here is my code below dealing with the volume slider.
[Code]....
The (-4) is an offset value so when you drag it all the way to turn it off, it's 0 and not 4. I need to reverse this somehow, so the traces above will swap... going down will make userVolume = 4 and going up will make it 30.
I'm making a flash payer.I already finished the volume part, and I also want to add two functions.One is when user click "add button", it will increase the current volume and change the volume display colour.Another is when user click "minus button", it will decrease the current volume and change the volume display color.How do I write these two function?[code]
View 1 RepliesThis is a completely AS3 scripted, and dynamic project, meaning I cant use any assets from the library.
1 - This button is a mute.
� Currently the loaded sound now fades in with a timer.� I want the button to over-ride any sound elements on the stage: the mp3 and later a flv movie as well.� In the below example the button only interferes with fade, and dosen't actually override it, after the fade - it dont do jack. � SoundMixer.stopAll(); will of course kill everything but I cant toggle this(can I?)
2 - The toggle button itself� I've loaded two png's into a sprite, and created a toggle button from them using an if statement. � Is this best practice? or would you recommend something else?� Perhaps SimpleButton?
[code]....
i was wondering if i set a variable on a button (the button is on level 5)
Code:
_level5.current_selection = "credits"
and i would like the movie on level 1 to recognize that this button (on level 5)has been pressed,is this script correct on an empty keyframe in level 1.
Code:
_level5.current_selection = "credits";
if (_level5.current_selection == "credits") {
loadMovieNum("credits.swf", 2);
[code].....
i've tried this and it isn't recognizing the variable.
ok lets say you create a button that when held down play an animation of 20 frames if realsed it goes to frame one and stops if held down it plays out this animation. for the topic lets say you have a fire animation and you want the fire to apear and if the user hold its down the animation reaches the end of the time line and loops back and plays the last 5 frames of the animation and as soon as it is let go it goes to and stops at frame one. Well i know how to make a button that when held down plays out an animation. And i know how to say when released goes to and stops at frame one. What i dont know how to do is to loop the fire at the last 5 or 6 frames so the user can hold it down all day long and play out that animation.
View 1 Repliesdoes anyone have an example of a simple volume slider that controls the master volume of the entire swf?
View 1 RepliesI'm trying to create a movieclip that on mouseDown will decrease the volume by one as long as it is pressed.
I currently have a global variable called volPercent set to 100 initially and I have two buttons with the following code.
volumeup_btn.onRelease = function() {
if (volPercent != 100) {
volPercent += 1;
[Code].....
It works great but I need it to repeat the volume increase or decrease as long as it is pressed.
im trying to do is have a button that shows an animation (created by a duplicateMovieClip function) with onRollOver and stops the animation with onRollOut. It works when i roll over and it stops when i roll out, but then it continues in a loop up to the point where i rolled out (instead of cutting off completely as i would like). Id be extremely grateful if you could tell me where im going wrong.
View 2 RepliesI am working on a project and have a print function that basically does a screen grab and prints it out. I load a number of external swfs into levels of the main swf.I want the print button to stay on the top level. Is there a way to define what level a button is on?I want to define the button on level 20. I contemplated loading it in as another external movie clip, but the script won't work if I do that.
View 1 RepliesI have a button that starts and sets the volume of a song but I can figure on how to increase the volume when you click the button.[code]
View 1 RepliesI'm creating a movie with an FLVPlayback component. I used the standard Play/Pause, Mute and Volume Bar components supplied with CS5.I have had no problem getting the individual components to work by themselves... the play/pause button plays or pauses, the mute button mutes, and the volume slider controls the volume. But how do I set the volume bar to 0 when the mute button is on, restore the original volume when the mute button is turned off, and turn on/off the mute button if the volume bar is dragged?
View 2 RepliesI'm very new to flash and i've made a movie for a website [url]... and i want to set the sound to 0 on my mute button at the moment i've put [code]...
View 1 RepliesI'm trying to setup a spinning button (volume) with AS3 but I'm stuck with the syntax. This is the script:
var DistX = Vol_btn.mouseX();
var DistY = Vol_btn.mouseY();
var Radiant = Math.atan2(DistY,DistX);
[code]...
I am new to action scripting and am looking for a code which will reduce the volume of sound coming from my flash to 0, but then allow it to go back to 100 if pressed again, from the same button.[code]...
View 7 RepliesI am working on a Flash Player for my radio station and I am now trying to add a push + and - for the volume and I cannot figure out how to do it. Everything I have run across in my search has been a slider and that is not what I am looking for. Below is the action script from the player.
Code:
// Setup sound object
var s:Sound = new Sound();
[code].....
My main movie is on level 0, of course. On level 0 I created an empty movie clip named "container". Now, I load another movie into container, and I loaded it on Level 1. Now, I want to put a code inside a Movie Clip that is on level 1, which is the new, loaded movie that will disable a red button on level1. Here's the code I used:[code]That worked to no avail as well. So, I'm wondering if the code that disables and enables buttons only work with a handler? Like an onClipEvent or on (release) handler? I'm puzzled right now, because this is really elementary but i just don't know it right now.
View 2 Replies_root.createEmptyMovieClip("vsound",_root.getNextHighestDepth())vSound.attachAudio(ns);[code]....
Before i had the volume slider, the mute button was fine. but now, it doesn't work anymore.
This is a completely AS3 scripted, and dynamic project, meaning I cant use any assets from the library.
1 - This button is a mute. � Currently the loaded sound now fades in with a timer.� I want the button to over-ride any sound elements on the stage: the mp3 and later a flv movie as well.� In the below example the button only interferes with fade, and dosen't actually override it, after the fade - it dont do jack. � SoundMixer.stopAll(); will of course kill everything but I cant toggle this(can I?)
2 - The toggle button itself � I've loaded two png's into a sprite, and created a toggle button from them using an if statement. � Is this best practice? or would you recommend something else?� Perhaps SimpleButton?
ActionScript Code:
var btmUpURL:String = "a_icn-1.png";
var btnDwnURL:String = "a_icn-0.png";
var btnLoader1:Loader = new Loader();
var btnLoader0:Loader = new Loader();
[code].....
I have a volume slider and I want to implement a mute button to mute the sound no matter where the slider is and unmute again when clicked or the slider is moved. I've tried to do it but so far I've managed to mute it and unmute it using the above methods, but whenever I move the slider to another position and go to mute it again, it doesn't work.
View 9 RepliesI have a swf that loads external swfs. I am trying to add a mute button to the container swf that controls the volume, so the user can mute and unmute the sound. However, I cannot figure out how to accomplish this. I cant get setVolume from AS2 to do the job. I have also tried SoundTransform.volume=0 and that didnt work.
View 13 RepliesI am relatively new to Flash CS3. I need to create a video file add a skin and put a voice over or background music. I have done all of it but I have a problem with the skin. On the skin there is a volume button for the video. How can I mute or control the volume of the video? Just like in youtube for example. You can turn it up or down. What is the code for it? Because when I click on the button to mute ir or turn it down it doesn't do anything to the volume. I had a separate video and a song but I went to Windows Movie Maker and associated the song with the video so now it is a whole: video with a song. So basically I just want to know what I need to do in order to control the volume of the video.
View 1 Repliesim trying to create a level select screen so the buttons unlock as you complete a level, so far i have this on each button:
on(release){
if(this.number <= currentItem){
gotoAndPlay(3);
}
}
[Code]...