Flash :: Load Image To Multiple MC?
Apr 28, 2010How can I load the same image in to multiple mc's without have to load for each one.
View 1 RepliesHow can I load the same image in to multiple mc's without have to load for each one.
View 1 RepliesI have a image of a person that I would like to load a certain number of times in a row to show a total of how many people took part in this particular event. In total I need 166 replications of this image, is there any actionscript I can use to do this without having to create a key frame for every separate image?
View 7 RepliesIs there any way to load an external image and add it to more than one movie clip?
View 3 RepliesIs there a way I could use an externally loaded image in multiple movieclips? I load the image using the Loader class but how can I copy it over to some other clips?
View 2 RepliesIs there a way I could use an externally loaded image in multiple movieclips? I load the image using the Loader class but how can I copy it over to some other clips?
View 4 RepliesI am trying to create an interactive 3D canvas, e.g. it loads up the person image and loads it into several - pre warped- movieclips... trouble is when I run this:
ActionScript Code:
function imageLoaded2(e:Event):void
{
canvas_wrap_mc.canvasF_mc.addChild(imageLoader2);
[Code]....
It only executes the last one instead of them all, when I remove the last one (canvas_white_mc)... it goes to the next last one canvas_black_mc...
I'm obviously doing something wrong, and everything about addChild and loading external images for me is a bit loose weave!
a) scrollable menu where my multiple image of png will load into
b) multiple (could also be one image) of png images that will gradually appear into the same folder where my .fla file is.
c) a layer of frame (more of a window, it's scrollable upwards & downwards) - the place for my original sized png image to appear
d) dropdown menu - that will contain form1, form2, form3 [form1, form2, form 3 will represent which part of the png image willl be shown in (b): form1 = top, form2 = middle, form3 = bottom]
1) a png image (possible that the png image will come in multiple) will load into my flash movie automatically, specifically all of them will load on a scrollable menu one after another, side by side with the png image size reduced to fit into the menu.
2) once i click one of the png image on the menu, the image will appear beneath its [like what i've explained in (c)]. this image is scrollable only upwards & downwards within the windowframe, and it should be the original size (not the reduced one to be fit into the menu)
3)below, there's a dropdown menu [i've explained in (d)] that will be chosen from, let's say form1 is chosen. the window where the scrollable png image is, will show the part where i set form1 is for.
What would you use to create buttons which when pressed load an image in an image area within the same flash document?
View 1 RepliesI have 24 movie clips on the stage: my_menu.image_holder_mc1 thru my_menu.image_holder_mc24. I want to load an image in each one. How do I identify the holder which to add a child.
The Code I have so far is....
Code:
for (var i:Number=1; i<=24;i++){
var myLoader:Loader = new Loader();
myLoader.name = "image_"+i;
[Code].....
I have a swf file, which plays 6 videos one after the other in a loop. This file is very huge so it is taking more than a minute for it to start playing after the page finished loading. I have taken the original video file, and split it into 6 files. I plan to have 6 tiles in the flash file as soon as the page loads, and when some tile is clicked, the video is loaded dynamically only that video or swf file so that it saves the loading time and once this is done, i want it to revert back to the main page with tiles. I am just starting off with flash and I have no clue how this is possible in flash. I am not asking for code, i need some tips to get started.
View 1 RepliesMy file name is slider_1_1.swf. But once complete file then user next button click load in slider_1_2.swf this use in loop function.
View 1 RepliesI have an XML file with 1 parent node that has 1 child node inside it. The parent node is straight forward. It only has one attribute.
The child node has 3 attributes in it - Title, Photo, URL
I want my Flash file to have 3 containers - 2 Text list containers and 1 image holder. The first text container will load all of the Names of parent node. The second text container will load all of the Title of the child node.
The 3rd container will be a MC holder that will load the Photo and will link it to the URL specified in child node.
How do I script my Flash file?
Right now, my script is as follows and it successfully loads the name from parent node in one of the containers. I'm confused with other two!
Code:
function onXmlLoaded(success:Boolean) {
if (success) {
// make a handle to the root node in the xml
[Code]....
I am using the following codeIn actions for Frame 1:
var myrequest:URLRequest=new URLRequest("A.swf"); var myloader:Loader=new Loader();myloader.load(myrequest);img1.addEventListener(MouseEvent.CLICK, clickButton);function clickButton(event:MouseEvent):void{
[code].....
I am creating a Flash site for a client who wants to display many (about 15) fairly hi-res photos as well as a video. I am using the Video class to display and control the video, and the Loader class to load the photos. I preload them from an XML file up front, while "loading..." is displayed.
The video plays immediately after the loader finishes, and the user can also choose to view the slideshow, which has left/right arrows which show each photo with a simple fade tween between each one.
The problem I am having seems to be that when all these assets are loaded, the video and the "fade" effects are very choppy. If I cut down on the number of photos, everything works fine; but I have to include all of them, plus the video.
I am storing all the Loader instances in an array, and when they are requested, I add them to the stage and fade them in. When it finishes fading in I remove the previous one from the stage. So they are all stored in Flash's "memory", but there is only one Loader or Video instance on the stage at any given time. Is there a better way to handle this? Perhaps some way to cache the images but not bog down Flash's memory? I would prefer to have everything loaded up front in order to avoid needing a "loading..." for every slide.
I want to load variable with multiple parameter link so i will load it in flash Like i have text file like it :
link1=mylink/youlink/ghe&ghik?dfds.blabla.html
link2=mylink/youlink/ghe&ghik?dfds.blabla.html
so how i can load it in flash?
What I'm trying to do is quite simple. Load an image externally, then display it (addChild it) multiple times, in different places, without loading it again and again. (Granted, caching means the image won't be downloaded multiple times, but I'd like to avoid those annoying disk accesses as well.) I know that flash doesn't actually support this. A while ago I was trying this same thing, I dug around for hours, and there was no real solution.
View 2 RepliesI have a site with an animated flash logo. Is there a way to load an image instead of the flash when flash isn't installed / running properly?
View 3 RepliesI need to load multiple images from ZIP archive and do some actions after all files from ZIP archive have been loaded. I use FZip library to manipulate with ZIP files. My problem is that sometimes the loading of all files are not going.In this code I starting loading process:
loadedImages = zip.getFileCount();
trace("Starting... " + loadedImages);
for (var i:uint = 0; i < loadedImages; i++)
[code].....
how to load ONE image via XML into flash.No buttons no tweens not second images or changes gallerys just the MOST white bread noob way of getting you press crtl + enter and there is and exteral image in the swf.
View 4 Replieshow to load ONE image via XML into flash. No buttons no tweens not second images or changes gallerys just the MOST white bread noob way of getting you press crtl + enter and there is and exteral image in the swf.
View 1 RepliesFirst of all, let me say that I have no actionscript knowledge, but I have PHP knowledge.
How can I make a movieclip display an image from a php file?
And how can I send the image from the php file to the movieclip?
There's a SWF file on one page that, when you click on a 'Start' button loads some image. The URL to this image is passed as a SWFObject variable. I would like to change this image to one I have uploaded on my host. have tried setting a breakpoint on the line that pushes the image URL variable to the object and setting my URL, but the image wouldn't load because of cross-domain policy.Now I am thinking of writing a simple c# proxy which will return my image instead of the real one when Flash requests it .To sum it up, I want to replace an image that SWF loads from a constant URL to a custom image of mine. Decompiling is not an option.
View 1 RepliesWe have multiple servers for different offices. SWF is copied to multiple offices and there is script to redirect the path depending on the user location. It works well except that it copies the SWF only once each day. Before it's available, we have to use the path to the staging server location that is only visible to the main office and identified users. If SWF is not copied over, users would see a blank page. I wonder if it's possible to have some kind of Javascript that will display an image (can be stored in the main office while accessed by all) if SWF can't be found. This would make it more usable during our update time.
View 0 Repliesok i am using a php page to get a image (jpg) from mysql database blob field.... now this is how i get the image
for eg : [URL]
this shows me my image... and in the php the code is set header to image and depending on id it gets the image from the database
how do i load these images into flash??? how can i load these images from the db into flash
i have been looking at the xml thing on this site...but it does a little more than i need it to do and i cant figure out how to pull out just the parts i need.
i just need to load an image into flash with xml...and give that image a link.
Is it possible to load a jpg in place of a flash object if no player is found on the viewers browser?
I've figured out how to load an alternative page using "onload" as part of the body tag if no flash player is found, but just need to have something to load an alternative image object instead.
ok i am using a php page to get a image (jpg) from mysql database blob field.... now this is how i get the image URL...this shows me my image and in the php the code is set header to image and depending on id it gets the image from the database.how do i load these images into flash??? how can i load these images from the db into flash please help.
View 3 RepliesCan a html webpage load multiple flash simultaneously which uses FLVplayback component ? Because I am trying to create a webpage then loads and play multiple videos in flv format simultaneously and was thinking of using 3 or more flash file to play the videos.
View 5 RepliesI'm using Flash CS4, and a template that I got from a friend to create a website.The template I have uses this "man figure" on the right side of the file. I want to make it so that this pictures loads a different picture each time the page refreshes. The picture can be randomly rotated to a different picture.I'm wondering if there is a possibility to do this, and if so, how should I go about it.My knowledge of Flash is very poor..Here is the template and swf file of the original file I have uploaded to a downlaodable website. The link is only available for 7 days from today
View 8 RepliesDoes anyone know how to load in only part of an image in Flash? The image is loaded in dynamically by the user, so I can't just crop it myself.
View 4 Replies