is there any Java library out there that can help intercept video and audio streams being sent through the browser?
So for example, a video starts loading through a flash player using some Flash server, the java application would listen for video/audio stream and capture and write it to video on the disk.
I am using a red5 server. I am doing a two way video conference using flex application. My current red5 server is storing both streams as different flv files.
now i have done some editing and have saved these edited files as one with video stream
[Code]...
I have read in FMIS 4 "new features" that "absolute timecode" allows to switch audio tracks while playing a video (managing synch). Is there any exemple showing how to use this funtionnality (server config, flash player action script exemple)?
View 5 RepliesMy server is streaming binary audio data (mostly mp3 files) to a client (a browser). This client stores the audio data in memory.
What I'm looking for is a flash audio player that I can input the binary audio data so that it can play the audio file.
Preferably, the flash client is merely a bridge to Javascript so that I can handle everything in Javascript and simply use Flash's audio features, but this is not a requirement.
I'm currently working on a University project which involves importing audio streams into an array within Flash using AS3. At the moment I have all of the feeds importing successfully but I need some help with the next step of assigning identifiers (i.e. names) to each array item. My plan is to link these assigned identifiers with a visualisation which will play accordingly when the stream is being imported. Below is the current code I have. The links for the audio streams have had to be removed due to legal reasons.
[Code]....
I'm currently working on a project which involves importing audio streams and visualising them within Flash. At the moment I have two files, one which can import all of the streams at once, continuously and another which visualises just one of the streams using an example animation I found which will be replaced at a later date. My problem is connecting the array to the visualisation so that all of the streams interact with it and affect the animation. Below is the code I have for the multiple streams with no visualisation file.
Code:
var stream_arr:Array = new Array(
"mtl2.liveatc.net/kbur",
"bos.liveatc.net/6b6",
"m1.liveatc.net/kbwi_belay",
"aus.liveatc.net/kccr",
"mso.liveatc.net/zob_cle",
[Code] .....
Note that I have removed the "http" from all stream addresses due to my low post count.
And here is the code I currently have for the file which can visualise only one stream, rather than the multiple I would like.
Code:
stop();
function goBack(evt):void {
gotoAndStop(1);
this.removeEventListener(Event.ENTER_FRAME,spectrum);
} var snd:Sound = new Sound();
[Code] .....
If I import an FLV video is there any way to remove the audio, put the audio into a byte array, and then re-add the audio to the flv video?
View 1 RepliesIs it possible to mix audio streams in fms (like fmg)?
View 3 RepliesI am planning an implementation for a lecture capture solution for a local university. It is supposed to record all aspects of the lecture: the presenter will be recorded using videocamera + mic, his desktop activity is captured and optionally the whiteboard is captured as well (using Mimio). These input streams arrive (as video streams) to a computer that stores the recording on its harddisk. The file format for the recording should be able the hold multiple streams (Matroska for example).
The recording will be available from the uni's website. So at the client-side Flash seems a natural choice.
The player should display the different input sources into different rectangular regions of the player. One region displays the presenter, another region displays the desktop recording.
Is it possible to use a Matroska file as source for Flash streaming? If yes, how?
If no, is there another container format more suitable for this? The FLV format can only hold one audio and one video file. Is it possible to have one Flash client receive multiple streams and diplay them in different regions of its own canvas?
I'm trying to play multiple video streams simultaneously. However, I cannot synchronize these videos to play at the same rate.
I have three 45-second videos in FLV format and I use flash.net.NetStream to play these videos. I call netstream.play() of these netstream at the same time (by using a for-loop). However, these videos are out-of-sync even all videos files are on my local machine.
For example, when the wall clock is at 10th second, the first video is at 7th second, the second video is at 10th second, and the last video is at 5th second.
I think it may be affected by different jitter delays when streaming. However, I still cannot find the way to solve this problem.
How are live flash video streams broadcasted? I am guessing that as the broadcast is recording, the people that are watching are watching what has been recorded to an flv file a few seconds ago, making it 98-99% live, since it is a few seconds off of the actual recording time.
View 0 RepliesI have several flash clients that send live audio stream to the Red5 server. Is it possible to combine all this audio streams together so that other clients could subscribe only to one audio stream and listen live audio from all publishers?
View 11 RepliesIs it possible to mix several audio streams? I want to play several audio tracks simultaneously, but several factors that are at times, the audio tracks are out of sync, such as latency Sound.play method, the for loop, the spec of users PC, FLash Player version, operating system etc
View 1 RepliesI have several flash clients that send live audio stream to the Red5 server. Is it possible to combine all this audio streams together so that other clients could subscribe only to one audio stream and listen live audio from all publishers?
View 1 RepliesI have rather large project that contains several swfs and flvs with audio. The project is published in Captivate (which renders a main swf file). After the preloader screen, a lot of the audio files start playing at once at the beginning of the presentation. I have tried inserting an swf (1st Captivate slide) with AS2.0 command "stopAllSounds". It works as intended and stops all the cacophony. But then, none of my audio plays throughout the 7 minute project. Does anyone know how I can restart the audio?
View 1 RepliesI need to merge multiple live audio streams into a single stream so that i can pass this stream as input to VOIP through a softphone.For this i tried the following approach:Created a new stream (str1) on FMS onAppStart and recorded the live streams (sent throgh microphone) in that new stream.
Below is the code :
application.onAppStart = function()
{
[code].....
I am using Flex and FMS to develop a video conferencing application. I am using DynamicStream to automatically switch incoming streams to the appropriate bitrate depending on the available bandwidth. I was wondering if there is anyway in which I can instruct the DynamicStream to allow more bandwidth for audio (obviously at the cost of losing some frames from the video).
View 1 RepliesI have a SWF movie (only animation, no Actionscript) and I would like to programatically extract the resulting video and audio and whatever resolution.
View 2 RepliesNeed to design a flash video player which can run multiple angles of video at the same time. The primary video will run at full size, and the other angles will run at a much smaller sample size at the bottom of the video. User will then be able to select whichever angle of video he likes and upon clicking the smaller video it will become full screen/mainplayer shell. The video which was previously full screen will then take its place among the other smaller videos.
View 2 Replieswhether sending media streams from AS from sources other than Webcams and Mics is possible or not? Seems like doing this with NetStream object is almost impossible since the only video and audio sources it accepts are Camera and Microphone objects. Imagine that I already have access to both video files and raw flv stream bytes, audio and video interleaved together.
View 2 RepliesI ran a simple live video streaming application for the first time with actual users and ran into a couple of serious performance issues that had not turned up during testing. In this instance there was one video stream from a live web cam and used FMLE at 150 kbps using VP6 and MP3 @22k. There were 16 clients and everything worked pretty good for about 30 minutes. (although some clients said their audio and video were out of sync by up to 3 seconds)
Then individual clients would have either the video freeze or the video would continue and the audio would stop. These clints had to "disconnect" and then "connect" again to the application. This happened to all of the clients at one time or another for several minutes. I stopped and restarted the FMLE with progessively lower bandwidth settings down to 75 kbps but still clients were having the same issue.
I eventually stopped the FMLE and used the applications built in publisher at 45 kbps and that seemed to eliminate the freeze/dropping issue. But of course the video quality was very poor and some clients still reported that the audio was out of sync with the video. The server hosting the FMS application is a quad processor dell with lots of memory and network connectivity. The Flash Media Admin Console performance graph showed the total Bandwidth as 3 Mbps at maximum.
Because of network latency,there will always be latency, how to know how many seconds the latency is with ActionScript?
View 2 RepliesMy CDN is running FMS, and my customers and I stream a lot of live traffic through it. We've got FMS configured to auto-archive our live streams, but that only works for stream using VP6 video. When I look at the archived files captured from H.264 streams I get audio but no video.
Is it possible to get FMS to autoarchive H.264 streams? Or is this planned for a future release of FMS?
I am writing a Red5 application that provides 1-on-1 video chat to a Flash client over RTMP.
Unfortunately most tutorials I was able to find were sketchy at best and the documentation of Red5 itself tends to be vague when it comes to API concepts and intended usage.
In short, I am a bit stuck and looking for hints on Red5 ApplicationAdapter implementation. Gnarly details are as follows:
First of all, the connections come in two flavors: visitors and consultants. A visitor should be able to indicate which consultant it wishes to communicate with. A consultant simply gets connected to the requesting visitor as long as the consultant is not busy servicing another. Obviously, every RTMP connection has two-way traffic: both sending and receiving video. From the standpoint of the server, connections bring in a bunch of video streams that get their receiving endpoints assigned by request. Since several video conversations can be in progress simultaneously, the main task of the application is to handle the mapping of visitor streams to consultants and provide a list indicating each consultant's state (busy/available) via AMF.
So, all in all, I have a pretty good idea what I am aiming for but how to achieve it with Red5 is still a bit of a mystery.
What is the easiest way to establish the connection type (visitor/consultant)? Which API classes should be used to implement a persistent, globally accessible list of active connections for reporting the state of each consultant? How to switch receving endpoints dynamically when the goal is to connect a specific visitor to the selected consultant?
I want to create two swf (publisher and subscriber).I have created the publisher client which publishes the webcam video to the Red5 server.
Now I want to create the subscriber. I want some kind of combo box which lists all the streams being published at that moment. So that user can click on any of the stream name in the list to see that stream.
Q1. How the subscriber client can find all the published stream at that moment?
Q2. How the subscriber can update that list automatically (any events for which it can listen to so that it can add or delete stream from the list)?
I have a video on my site (progressive download, flv file, imported using flash cs3 video encoder) and I used the FLVPlayback component with a simple skin. The video works great, my only problem is that I want the sound to stop when I click on other buttons on the page. The way I designed the site (maybe not a great set up) everything is in one big swf file, so when you click on another button on the page to show another project, the sound from the video file (that is no longer showing) is still playing.URL...
View 10 RepliesI'm doing a Security Project now. And this project needs to intercept javascript call from Flash and do analysis. I've searched the web for a couple of days but still can't find any solution. Flash can use getURL, externalInterface.call to execute javascript code, and I want to stop the malicious calls from Flash. Thus, I need to intercept these javascript calls.
View 1 RepliesIs there a way that I can intercept all button click event in my Flex(air) app, because I need to add a sound when some button is clicked, and I dont want go over all screens and add this function and also change each click event in each button.
View 1 RepliesIs there a way that I can intercept all button click event in my Flex(air) app, because I need to add a sound when some button is clicked, and I dont want go over all screens and add this function and also change each click event in each button.
I'm looking for a flash video player and a flash audio player with playlist that I can customize.
View 2 Replies
