Flex :: Buffering In Video Display?
Jun 14, 2011
I'm new to Flex and currently working on the Video Component in Flex. The problem is:Buffering starts only after the specified time. So, if i have specified the Buffer Time to be 2 s, then the video buffers for sometime, gets the data for the 2s and then plays it and then again buffers. The point is it is not buffering in parallel to playing. Is there any way of making this possible in Flex 3? Or is it already there in newer versions of Flex?
View 1 Replies
Similar Posts:
Jan 31, 2011
I am trying to use Flex Video Display as a preview player. The player is streaming the video from the server.While The buffering is not complete, if we try to drag the play head to an area beyond buffered region, the player will drag the playhead back to the current playing position. I need to implement the player like you tube video player which allows to drag to anywhere in the track even when data is not fully buffered.Is there a way for doing this.
View 1 Replies
Feb 16, 2011
How would I display a buffering animation whilst a netsream object was downloading video data? Using Actionscript 3.0 in Flash.
View 1 Replies
Apr 12, 2012
As I understand it video over a connection of say 40Kb/s wont actually have time to load and make a buffer, and it'll be "glitchy", so it wont make much difference whatever buffering is put in place. I'm getting complaints about glitchy video. I don't have access to the servers serving the media so I put a load timer in a swf along the lines of averageLoadSpeed = (bytesLoaded / loadTimer.currentCount) / 1024;
Out of 5 tests run, 2 were below 50Kb/s. And I've been told the server also is not geared towards media and put priorities on other business tasks. The head of IT for this company keeps going at me about buffering, and how that'll fix the problem. I tried to explain that the speed is way too low (32Mb = 32768Kb / 24Kb/s = 1,365 seconds * 60 = 22min) enlighten me on buffering aside from wikipedia's explanation about IO streams.
View 1 Replies
Jan 11, 2012
I am developing the video player with custom video controls and I want to stop the video buffering when my video is paused. As sson as I play the video the buffering starts from the last bufferring point.
View 8 Replies
Feb 16, 2011
how would I display a buffering animation whilst a netsream object was downloading video data?
View 0 Replies
Dec 23, 2009
I have a xml video background and need to add a preloader before the video is buffering. The problem is that I am loading the video from xml file and from what I've tried the preloader works for the swf file but not for f4v video loaded externally. You can check the preview here: [URL]. What I've come with is to compress the video so Ill get a smaller file or change the buffer time, but the priority is to come out with the preloader.
View 1 Replies
Feb 13, 2012
I understand that the spark framework has a video player and a video display. The difference being that video display doesn't have the video controls.I know that stage video is new in AIR3 and uses hardware acceleration to play videos.My question is, does videodisplay and videoplayer take advantage of stage video out of the box? Do I need to implement it another way?
View 2 Replies
Dec 7, 2009
my question today deals with Flash AS3 video buffering. (Streaming or Progressive) I want to be able to detect when the video is being buffered, so I can display some sort of animation letting the user know to wait just a little longer.
Currently my video will start up, hold on frame 1 for 3-4 secs then play. Kinda giving the impression that the video is paused or broken :(
Update
NetStatusEvent from livedocs. It seems to me that the key status to be working in is "NetStream.Buffer.Empty" so I added some code in there to see if this would trigger my animation or a trace statement. No luck yet, however when the Buffer is full it will trigger my code :/ Maybe my video is always somewhere between Buffer.Empty and Buffer.Full that's why it won't trigger any code when I test case for Buffer.Empty?
public function netStatusHandler(event:NetStatusEvent):void
{
// handles net status events
[Code]....
View 4 Replies
Jun 10, 2009
I have some videos that are already in FLV format. I embedded them inside a little swf. And I embedded that swf into a bigger swf where everything els is. When a user clicks on a button, it loads the swf with the FLV movie in it...how would you go about buffering a video?
View 21 Replies
May 26, 2011
When my streaming videos start they will buffer and begin to play as normal. However, as soon as the vid starts buffering again a problem arises. Basically what is happening is that Flash is buffering the video to a certain point, but instead of resuming playback from the point where the vid paused it now jumps instantly to the end of the newly buffered area without playing the vid portion in between. Which essentially means that it skips merrily through the video and never stops buffering.
View 3 Replies
May 26, 2011
I'm working on the development of a tool that plays two audio files and one video file simutaneously.All the files need to play together at the exact same time, so that the audio syncs with the video.
Our situation right now is that each one of the files start playing at different times depending on how fast they are loading. The problem is, my programmer is telling me that there is no way to track the buffer of the audio, so for example, the video only starts playing when at least 30% of the audio is loaded. Is it possible to do this?
The video player would then display something like:
[Code]...
View 4 Replies
May 26, 2011
I am pretty new to scripting and Flash and streaming vid is proving a massive headache at the mo. Have bashed through most of my problems but this one has got me stumped, scripting skills not up to the task. When my streaming videos start they will buffer and begin to play as normal. However, as soon as the vid starts buffering again a problem arises. Basically what is happening is that Flash is buffering the video to a certain point, but instead of resuming playback from the point where the vid paused it now jumps instantly to the end of the newly buffered area without playing the vid portion in between. Which essentially means that it skips merrily through the video and never stops buffering. That said I'd prefer to get to the root of the prob, particularly if this is a codec/keyframe issue, since I could then re-export the vids appropriately. I am using mpg4 (.mov) with H264 compression and keyframes at 1 sec intervals.
View 2 Replies
Feb 8, 2012
I've been working on a video-centric project that requires a very specifically designed video player, which I've built from scratch -- no skin. Things were going great until I actually uploaded the video and SWF to my server and tried it out. Here's the issue: The video, which is an F4V that's been imported into Flash as an external asset -- I'm not using NetStream, nor am I using a Flash media server -- starts loading almost immediately. But when you use the custom-built scrubber bar to jump ahead in the video, it freezes up until, I presume, the video has loaded to that point, at which time the video starts again. If you open the SWF and let it sit for a few minutes, this isn't an issue -- you can jump back and forth as much as you want.
So clearly the problem here is that the video is loading from the beginning and the user can only get to a certain frame when that frame has already been loaded. But it must be possible to start loading from a specified point, right? After all, the video doesn't load all together and become available only when the whole thing is done. It starts loading at 0:00 and continues progressively. I just want to change where it starts loading by telling it not only to play at that point but to start loading at that point, too.
View 1 Replies
Jul 15, 2004
tutorial for making a buffering video player, with scrubber etc that lets the viewer see how much of the video has loaded whilst they watch it. I've been searching for ages but to of no avail!I'm using MX, not MX 2004
View 2 Replies
Aug 19, 2007
Any dynamic buffering strategy solution for streaming video from the FMS server? I am following the Adobe Tutorial but i get confused where to place all of the files as I am not using the Management Console...I'm using flv hosting and all i have access to is just the ftp servers.
View 1 Replies
May 18, 2010
I have downloaded and installed the Flash Media Server (FMS) trial version. Just purchased the software today and waiting for the activation serial number. I created a video gallery - [URL]. My goal is for these videos to stream just like vimeo. I am only using HD 1280 x 720 video. All videos are between 25 to 125 MB in size, originally .mov files converted to .flv using FFMPEG. Videos are between 30 seconds to 58 seconds in length.
I am using ColdFusion to upload and organize my videos and I have configured FMS to work with CF. The Issue is that these videos buffer the same way they did when I didn't have FMS installed. Press play, the video buffers, the video plays, then stops to buffer again. Stop and Buffer, Stop and Buffer. I can understand if there is buffering at the start of the video but not throughout. When I start the video over from the start, it has to buffer all over again!
View 2 Replies
Oct 13, 2010
I got myself an assignment which requires me to add buffering and few other video related functions to a flash file that uses embedded video( on the timeline).
this swf is about 30-40Mb in size and it loads quite a while.
what i need to do is to detect when the video stops playing, runs out of buffer, but i dont know how do i listen to the netstream events if there is no netstream on embedded video.
View 5 Replies
Dec 1, 2011
What is technical difference between buffering and loading ? Say, i have a video, which is showing loader bar in progress. Then what's happening exactly ? Buffering or Loading ?
View 1 Replies
Jul 28, 2009
I'm trying to implement a simple NetStream video player with Progressive Video, but for some reason the video is taking about 12-13 seconds to begin buffering...I don't get it. If you check this link, you can see the buffer progress, you can see that it sits at 0 for >10s, until finally starting to buffer, at which point it finishes very quickly. [URL] It's a hard one to search for as any query using connection or slow obviously returns a bunch of crap that I don't need...
[Code]...
View 1 Replies
Aug 1, 2011
How does one do fullscreen with VideoDisplay? I am using:
stage.fullScreenSourceRect = new Rectangle(video.x, video.y, video.width, video.height);
stage.scaleMode = StageScaleMode.NO_SCALE;
stage.displayState = StageDisplayState.FULL_SCREEN;
But this does not allow me to go back to normal screen, not even i use:
stage.displayState = StageDisplayState.NORMAL
View 2 Replies
Aug 16, 2011
I need to display Facebook video player in my Flex application. I retrieve URL via FB Graph API to a video being displayed in facebook video player and I pass it to SWFLoader. Unfortunately I have some problems with getting it displayed correctly.Facebook video player is displayed on Facebook site as 720x244 movie. The movie is displayed in the middle of it (320x240) and on the left and the right side there is black background.Is there any way to display central part (movie) only with SWFLoader? Here is my code:
<mx:Box width="320" height="240" verticalAlign="middle" horizontalAlign="center">
<mx:SWFLoader source="{'http://www.facebook.com/v/' + numberOfVideo}"
visible="true" id="video" autoLoad="true" />
</mx:Box>
View 1 Replies
Feb 3, 2011
I have a video display in my flex app. which is attached to the camera. The camera resolution can vary depending on the user's selection, While the video display (preview) dimensions are fixed. I am then doing this:
bmd.draw(vidDisplay);
Where bmd is the bitmap.. The problem is the resulting bitmap has the correct size of the camera settings (which is set) but the capture from the video is always the size of the video display inside the bitmap.. I hope i am making sense. The result looks like a little picture inside a bigger image top left justified. I want to have a video display preview with fixed height, but be able to take snapshot with varying resolution.
View 2 Replies
Nov 20, 2011
I'm building a video player, and I'd like the play to show a "Loading, please wait"-type animation whenever the video is buffering and not playing. (This is either when the user enters the page and the video has to buffer a bit before it can start playing, or when the video suddenly stops midway because the internet connection can't load video fast enough.) Is there a way to detect when this happens and show the animation accordingly?
View 1 Replies
Nov 20, 2011
I'm building a video player, and I'd like the play to show a "Loading, please wait"-type animation whenever the video is buffering and not playing. (This is either when the user enters the page and the video has to buffer a bit before it can start playing, or when the video suddenly stops midway because the internet connection can't load video fast enough.) Is there a way to detect when this happens and show the animation accordingly?
View 1 Replies
Feb 27, 2010
Internet Explorer will not display flash video in stand alone video players, similar to the one at: [URL] The other embedded flash content is viewable.In the IE8 tools, manage add on's, Adobe Flash Player is not listed.I've also noticed that when I access the Adobe Flash Settings manager, I can not uncheck "hardware acceleration".Windows XP Home Service Pack 2 is the operating system.
View 4 Replies
Jun 28, 2011
How do I identify all the display objects in the display list in ActionScript, bellow the one that I have clicked? All the other objects are shadowed by the first one. What if other objects have visible parameter as hidden?
View 1 Replies
Mar 28, 2009
Which is better to display a bunch of videos in a gallery swf or f4v?
View 1 Replies
Jun 21, 2011
My users will upload FLV movies and I don't want to hand-code SWF files -- is there a way to start with an FLV short movie(they're under a minute on average) -- and automatically package their uploaded FLV movies inside an SWF file?The site allows them to view the .SWF files using their already-existing Flash player.
View 5 Replies
Mar 24, 2009
I've got an FLV file that's 10 minutes long. I want to mimic the effect of speeding up the video, where it shows progress of the 10 minute video in say, 30 seconds.
View 2 Replies
