How do I extract more than one email from a paragraph and output the result to a console?
var pattern:RegExp = (/^[-._0-9a-zA-Z]+@[-._0-9a-zA-Z]+[.]{1}[0-9a-zA-Z]+[.]?[0-9a-zA-Z]$/i);
var asd:String;
asd=tt.text;
trace(asd.match(pattern));
I work on AS3 one week, and then take a break for a few weeks, then work on it a day, take a break, etc.. So I forget some of the basics, and need refreshers. I think I need to stop taking breaks.
Problem: I push multiple strings into an array, and some of the strings are the same.
Code:
var myArray = new Array();
myArray.push (Snivvle);
myArray.push (Kirupa);
myArray.push (Snivvle);
I want to find out which element positions "Snivvle" hogs up. We can see that it would be using element 0 and 2, and if we do an "indexOf" we would only get to see element 0, and doing a "lastIndexOf" we would only see element 2. How do I find out ALL of the element positions "Snivvle" is located in, so that it returns: element 0, element 2.
I have a list of txt files and when one is selected it is read and assigned to a string variable. this string is then pushed to a view : pushView(viewer, string), where the string is displayed in a textarea. I want to also pass the relative path of the file also. Is this possible to pass two strings?
[Code]...
what I need to do is combine 5 arrays with 5 individual strings (which have come from a JSON webservice) into one single list item in FlashBuilder Burrito. [code]I've pulled these out successfully and each one traces in the debugger, although as I need them all in the same list I'm struggling to establish them as a dataprovider together.If I push the strings and arrays together it is impossible to read properly, as the main Titles are at a different level to any descriptors for the products which are in the arrays.
View 1 RepliesI would like to compare a string variable to multiple strings. Is it possible?I wrote a pseudo code of my own which doesn't cause an bug/error report,but it doesn't seem to work properly either:[code]
View 3 RepliesI have multiple mc's that contain input textfields. I want the results of these to appear one after another in the same dynamic textfield. Later they will be sorted alphabetically.
So far, I've been able only to get one item to appear at a time in the dynamic textfield--the next item replaces the first. A for loop didn't work.
Can anyone point me in the right direction to get the new text string to be added to the previous text string rather than to replace the first text string?
Anything at all similar I've seen creates a shared object instead of writing multiple strings to one dynamic text field.
i have long string values how do i set it up ... like this
var longString:String = "Lorem Ipsum is simply dummy text of the printing and
typesetting industry. Lorem Ipsum has been the industry's standard since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum. ";
I have multiple mc's that contain input textfields. I want the results of these to appear one after another in the same dynamic textfield. Later they will be sorted alphabetically.
So far, I've been able only to get one item to appear at a time in the dynamic textfield--the next item replaces the first. A for loop didn't work.
Can anyone point me in the right direction to get the new text string to be added to the previous text string rather than to replace the first text string?
Anything at all similar I've seen creates a shared object instead of writing multiple strings to one dynamic text field.
I have a class that just contains Strings that contain XML[code]...
but I need to create more complex data than that. Is there a way to pass a variable into a string and then pass that into the XML constructor?
I want to be able to display a paragraph where if the text being shown is (say) over 15 lines long, then a link text will appear and if click it will expand.
Example:
This is a long line for here so I need to make more display but I cant so what will (More)... <== this more link will be clicked and the rest will show up below this paragraph expanded to show the rest of it. (Close)... <== this close link will be clicked and the rest of the page will be hidden again.
Can this be done in Flex? Here is a link example done in javascript [URL].
I'm using Flex builder to work on my flash project, and after reading this article about manipulating sounds using Sound.extract() I got very excited.So I wanted to get using it, but as far as Flex builder is concerned, the sound class doesn't seem to have an extract function, and causes an error if I try.I've downloaded the latest milestone SDK (3.5) and updated the eclipse system (I'm on a mac), but it still doesn't want to recognise the existence of Sound.extract(), even though the function appears withi
View 1 RepliesI'm using an auto complete component and a labelFunction so that user have the ability to search by their name or id. Once the search is completed I'd like to extract the data to a query.
The only problem is that I only need the name or id for the query not both, so I'd like to pull from just the id variable...
Currently if the user types - Joe or if they type - 13
Both would return a result of Joe - 13 via the auto complete component.
I'm using a dash - To separate the results visually. So I'd like to know if theres a way to extract text from a text field up to a certain character in this case a dash.
I am working on Flex Project using Flash Builder 4. I want to load swf (that has been made using flash CS5 and it contains about 150 movieclips in library, nothing on stage). Now I want to load its Movie Clips in flex? How to do it?
View 1 RepliesI've got a suite of unit tests for my project (pure AS3), and they all work brilliantly outputting standard JUnit XML to the trace output window. However, when I tried to get my test suite running on our continuous integration server I ran up against a wall.Flash is a sandboxed beast, isolated from the file system. I can't see an intuitive way to get this generated JUnit XML in to our CI software so it can be verified as passing.
I've taken a shot at implementing the approach shown in Continuous Integration with Flex,but it relies on reading trace output logged to flashlog.txt that is prone to failure on many fronts (debug player must be installed, flashlog.txt must be created, mm.cfg file must be configured properly). Also, I find that some of the time it fails to find the results in the flashlog and the build fails despite all the tests passing. This could be because I have too many tests and some are being pushed out of the log file.
I'm trying to rig up a basic mp3 cutter in Flash (using the Flex framework)I have gotten so far:
var ba:ByteArray=new ByteArray();
sound.extract(ba, playEnd - playStart, playStart);
This extracts the relevant bytes from the sound object and stores them in ba Then, I do this:
saveFile=new FileReference();
saveFile.save(ba, sound.id3.artist + " - " + sound.id3.songName + ".mp3");
The file saves properly, but it can not be played (Players say it is corrupted) how I can create a valid mp3 file from the byteArray obtained after the extraction?
Does anybody know any way or any software which could decompile swf file to generate the source code mxml file and actionscript file?
View 2 Replieswhat's the easiest way to cut string in Flex ?I mean, I have a sequence of urls, I want them at most 60 characters length. If they are longer they should be cut and "..." should be added at the end.
<mx:LinkButton label="{bookmarksRepeater.currentItem.name}" click="navigateToURL(new URLRequest(event.currentTarget.label.toString()))" />
I'm trying to localize my Flex app, I have been able to setup the locale specifics and all the stuff inside MXML tags, that works pretty well, my question is, what about if I have for example:
[Code]....
How can I change with ActionScript those two strings to an other locale?
I have a requiremnt where my Air application loads ZIP files instead of swf.The zip contains all swf ,images and other files.My requirement is when user browses for file in a browse dialog, user selects a zip file and the contents of this zip file should be displayed to the user.
View 1 RepliesI'm developing an application in Flex 3.5 for video tutorials, which uses a lot of Captivate 4 (AS3) videos (>200). In the front end, the user can navigate thorough the videos in a menu structure. In the administration part, the admins can upload more videos and organize them into the menu structure. Since we have more than 200 Captivate videos, we wanted to build in a search functionality into the fronted, which would be based on the text contents of the Captivate videos. The idea is: every time the admin uploads a new Captivate video into the system, an index will be created based on the contents of the video.
My question: how can I extract the text captions of a Captivate video using Flex or rather ActionScrip 3? (I know, there is an Export/Import function of Captivate, but I would like to access those texts dynamically from Flex.)
I am working over a program that needs to extract meta data from music files in different formats. It was easy for MP3 format, but there is nothing for other formats.I made a research, there is a lot of software for extracting meta data - but no source code or algorithm. There are open source projects, they use their own libraries, but I was not able to find something for Flex (Action Script)
View 2 RepliesI want a Flex UI to send a string of text to Rails which will process and return a string of text. Wash, rinse, repeat. That's all I want. All of the examples I am finding are much more complex and not very informative given my noobiness.
View 1 RepliesHow to insert complex strings into Actionscript?
So I have a string
-vvv -I rc w:// v dv s="60x40" --ut="#scode{vcode=FV1,acode=p3,ab=128,ch=2,rate=4400}:dup{dt=st{ac=http{mime=v/x-flv},mux=mpeg{v},dt=:80/sm.fv}}"
[Code]....
That string has so many problems like some cart of it can happen to be like regexp BUTI DO NOT want it to be parsed as any kind of reg exp - I need It AS IT IS!)
How to put that strange string into variable (put it not inputing it thru UI - hardcode it into AS code)?
I have something like
public class Controller {
[Observer("fetchEmployeesEvent")]
public function fetchEmployees() : void {
[code].....
I'm using Flex 3.6 and ZEND AMF version 1.11
I have an array that shows in my trace using trace(ObjectUtil.toString(event.result))[code]...
I need to match a string that begins and ends with the same character in flex...I know the long hand way (RE being - "a[^(a")]a" | "b[^(b")b" | etc...), but I'm positive this isn't what I'm required to do (midterm tomorrow!);
I need to do this in flex, but if you can think of a short regex for it, I may be able to convert it to flex notation.
What I was thinking of was something along the lines of -
%%
int firstChar;
%x string;
%%
[Code].....
But this bugs me in a few ways, first, having that variable makes this not a regular language; second, I don't know if you can even use a variable to in a pattern match; and third, I don't know how NOT to match it, if it's just a normal string. And third, I don't know how to return everything that's been matched while in 'string'
I'm using String.split to parse a command line string into an array of strings. The result is then used to call a function using the Function.apply API.If apply(null, ["17"]) is called with this function:[code]does not work (expected output: false Boolean; actual output: true Boolean).Is there a way to make it recognize "true" and "false" (or anything else) as Boolean values, just like it does with numerical strings? Ideally "true" and "false" should also remain valid string values.
View 1 RepliesI have been programming in actionscript for three months and I am very new to a lot of the details. I was programming in java in which there is an important difference between 'hello' and "hello". So my question is: In actionScript is it the same to use 'Hello' and "Hello". If not what are the differences?
View 1 RepliesI'm using String.split to parse a command line string into an array of strings. The result is then used to call a function using the Function.apply API.
If apply(null, ["17"]) is called with this function:
static function test(foo:int):void
{
trace(foo, typeof(foo));
}
it works as expected (output: 17 number).
However, calling apply(null, ["false"]) or apply(null, ["0"]) with this function:
static function test(foo:Boolean):void
{
trace(foo, typeof(foo));
}
does not work (expected output: false Boolean; actual output: true Boolean). Is there a way to make it recognize "true" and "false" (or anything else) as Boolean values, just like it does with numerical strings? "true" and "false" should also remain valid string values.
it is a trivial question. I was just wondering. Does the framework have a helper function that does something like this:
[Code]...
