I am compiling a very simple app, Main.mxml:
<?xml version="1.0" encoding="utf-8"?>
<s:Application
xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark">
[code]....
This is quite worrying because I am developing in Eclipse (which uses mxmlc) yet my master build script (which uses flexmojos) is producing a totally different file.
I was working on a project with flexmojos 3.9 and Flex 4.0. I decided to upgrafe my version of the flex SDK to 4.5 but I have the followin problems:
1- Maven Message: [FATAL ERROR] org.sonatype.flexmojos.optimizer.OptimizerMojo#execute() caused a linkage error (java.lang.NoSuchMethodError) and may be out-of-date. Check the realms
2- Stack trace: java.lang.NoSuchMethodError:flex2.compiler.common.Configuration.setKeepDebugOpcodes(Z)V
When compiling using flexmojos I get the warning:[WARNING] No themes are explicitly defined in the section or in any scope="theme" dependencies. Flexmojos is now attempting to figure out which themes to include. (to avoid this warning you should explicitly state your theme dependencies)[WARNING] Adding spark.css theme because spark.swc was included as a dependency.[code]But I just get an [code] must be one of [compile, runtime, system] but is 'theme'.I just want to use the standard Spark theme.
View 2 RepliesI'm using flexmojos 3.8 with flex compiler 4.1.0.16248.My Project compiles fine in Flash Builder, but with flexmojos / maven I get the following Error: Type was not found or was not a compile-time constant: UncaughtErrorEvent
The Flex Code looks like this:
loaderInfo.uncaughtErrorEvents.addEventListener(UncaughtErrorEvent.UNCAUGHT_ERROR, onUncaughtError);
The Flex Compiler 4.1 should know the type UncaughtErrorEvent - Why does it fail?
I am trying to create and build a flex library project (.swc) using maven 2 firsttime.I am able to create directory structure but build is failing. My maven settings are : Maven version : apache-maven-3.0.2
mvn archetype:generate
-DarchetypeGroupId=org.sonatype.flexmojos
-DarchetypeArtifactId=flexmojos-archetypes-library
[code].....
I am trying to create and build a flex library project (.swc) using maven 2 firsttime.I am able to create directory structure but build is failing. My maven settings are : Maven version : apache-maven-3.0.2
mvn archetype:generate
-DarchetypeGroupId=org.sonatype.flexmojos
-DarchetypeArtifactId=flexmojos-archetypes-library
[code].....
When I try to build the project I get
Definition spark.components.gridClasses:CellRegion could not be found.
this class is contained in com/adobe/flex/framework/spark/4.5.0.17855/spark-4.5.0.17855.swc which is included in the library-path by the flex-mojo compiler but I still get the error.
I use flex-mojos 3.9 and Flex 4.5.
I'am using flexmojos-maven-plugin to build my Flex module. So on the compile phase I'm getting org.apache.maven.plugin.MojoExecutionException: Error compiling!with no information on where (at what source file) the error happens and what is nature of the compile error.
View 2 Replies[code]There are no errors produced when this runs and a .air file is produced but when the .air file is double clicked I get the error message:"The application could not be installed because the AIR file is damaged. Try obtaining a new AIR file from the application author."
View 2 RepliesI have an Air application that lets users import jpg, png and swf files and use them as the source to an Image which they can drag around a Canvas.he import function copies the selected file to an images directory inside ApplicationStorageDirectory.When I click on an Image that has an swf as its source, I get a Security Sandbox Violation (eg. SecurityDomain 'app-storage:/Project1/images/menuBarBkgd.swf' tried to access incompatible context 'app:/Main.swf'). My mouseDown handler doesn't get called so I can't select it and allow it to be dragged.
View 4 RepliesI'm trying to build a flex project, linking it to some RLSs. When setting up the project in Flex Builder, the corresponding "build configuration" (that I got by adding -dump-config to the compiler options) generates (among other things) a tag like this :
<runtime-shared-libraries>
<url>some-lib.swf</url>
<url>some-other-lib.swf</url>
[Code]....
Our Flash web-based applications play lots of audio for narration and sound-effects. Some of our customers have firewall rules that block downloading of MP3 and other audio files. So, we need to wrap those MP3 files in SWFs. In the past, I've written JSFL scripts that automate the Flash IDE and walk through a complicated, fragile set of steps to embed MP3 files into FLAs and then publish those to SWFs. Now, Flex SDK provides the mxmlc compiler. I've mixed ANT into our workflow, and command-line and automated builds have been a joy. So, I want to make transcoding or wrapping of MP3s part of our build process. I've found Embedding Asset at Compile time in Pure AS3, but this will require that I write a script to generate a wrapper class AS file. Is there a cleaner way to wrap or transcode MP3 files into SWFs?
View 1 RepliesI downloaded the Flex 4 SDK from Adobe and extracted the contents to ~/Documents/flex4_sdk.
Now I have the following simple MXML file:
<?xml version="1.0"?>
<!-- usingas/StatementSyntax.mxml -->
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
[Code]....
When I compile it with mxmlc /path/to/file.mxml, I get:
Loading configuration file ~/Documents/flex4_sdk/frameworks/flex-config.xml/path/to/file.mxml (38642 bytes)
However, the resultant SWF file is blank. (Basically just a white canvas.)
I've got the Flex SDK 4 on my Mac and I found a way to compile AS3 into SWF files using Flex's mxmlc compiler in Xcode, so I wondered, would it be possible to do this sort of simply online? Using for example a language I'm familiar with, PHP?I thought it'd be a thing that would be interesting to use for a website, or like some private projects.
View 1 RepliesI am using ant to build my web application. I have a target in my ant script which takes approximately 8 minutes to compile. Since mxmlc compiles everything from scratch and loads up the JVM each time, it is taking a lot of time. Is there a way to optimize this task?[code]...
View 2 RepliesI have written a jquery/javascript editor in FLEX 3 and actionscript 3. It has syntax checking facility. I will write a syntax checking parser either in C or in java. Here, I will include executable file only with flex code. That executable file should accept fully qualified file name as input parameter and it produce compilation result as output, that i need to display in flex.
Please anybody provide suitable solution that how to add executable file in flex, that will accept input parameter and produce output.
When I use mxmlc to compile my mxml file, I get swf file. Now, I want to change the config to make mxmlc compiler generate html file instead, as we can do in Eclipse or Flex Builder.
View 2 RepliesHow to generate an Executable file of my MXML (flex) Application. What is the command using in command prompt for MXMLC.exe.
View 1 RepliesI need a way to programmatically record what source files are consumed in an MXMLC compile.Ideally there would be a flag to pass to MXMLC to have it report the complete list of sourc files it is compiling, but there doesn't seem to be such a flag. It seems generally you just pass a main.mxml file to MXMLC and it goes off and compiles everything it needs to without telling you what it's doing. As far as I can tell, you also cannot explicitly list the files for it to compile; it will resolve references automatically and compile referenced sources without any way to control that behavior or report on it.
If the compiler cannot supply this information and a user cannot control this behavior, the only other option I can think of is write my own source code scanner for MXML that will traverse all the references in a code tree to give a report of what MXMLC should be compiling, though that's obviously error prone and certainly not something I'm looking forward to.
Which mxmlc attributes do I need to replicate the behaviour of Flash Builder 4's Export Release Build?debug=false and optimize=true seems obvious, but doesn't reduce the swf's file size as FB4's Export Release Build does.
View 1 RepliesI've downloaded flex SDK from hen I call mxmlc or compc russian symbols are outputed, so it's impossible to work in command line. Is it possible somehow to switch language to English?
View 1 RepliesI am compiling an .as file with mxmlc on the fly using PHP.
CODE:
exec("mxmlc example.as",$retval,$success);
print_r($retval);
[code].....
I've noticed that, recently, builds in FlexBuilder have been taking much, much longer than they used to (30 or 40 seconds, as opposed to 3 or 4). What is the simplest way of profiling these builds to figure out what is taking so much time?
View 4 RepliesI am trying to compile a file into swf using mxmlc in command line. When it is a very simple mxml, compile is successful. But when the file contaion the fx name space, I get a compile error like: could not resolve (or ) to a component implementation.
I have to be able to do this, without the help of Flash Builder because I am working on a project where I will need to generate swf files from mxml files of which we generate the code.The code I am trying to compile is:
<?xml version="1.0" encoding="utf-8"?>
<s:Application
xmlns:fx="http://ns.adobe.com/mxml/2009"
[code]....
Has anyone noticed the following behavior building Flex programs using the mxmlc ANT task (running in the background): as the MXMLC task starts, it steals the window focus from whatever application is currently running, and then gives it back again! This is extremely disruptive.Is there a way to run the MXMLC task "headless" so it doesn't interact at all with the window system?I'm running on Mac OS X (10.5.8, if that matters), and Flash 4.0.1 (although the behavior existed on 3.x as well).
View 1 RepliesI've got external folder with resources (graphics, movies, etc) which is shared between a couple of projects. I'm able to link this resource folder in FlashBuilder (as described in [URL]). After that all the paths to embeds are relative to the project, and that's the behaviour I want.
This linked resource appears in .project file as follows:
<linkedResources><link>
<name>resources</name>
<type>2</type>
<locationURI>DOCUMENTS/Shared/resources</locationURI>
</link></linkedResources>
Note, that it isn't source folder and it is not included in compilerSourcePath tag. The question is how can I specify resource linked folder in mxmlc command line arguments? -source-path is not working here, relative pathes to embeds can not be resolved.
I'm interested in learning just enough Flash/Flex to do things that I can't do from HTML and JavaScript alone - play sound files and video, use multiple file upload things, perform cross-domain Ajax requests using the crossdomain.xml file etc. As such, I don't really want to learn (or pay for) the Flex IDE. I'm not much of an IDE guy in any case.
The problem is, most of the tutorials I've found talk about the IDE. I've figured out how to compile .mxml files at the command line using bin/mxmlc - now I just need to learn MXML, ActionScript and the various APIs! What are the best resources for learning these? I'm fine with buying a book, I just don't want to shell out for the API itself.
I'm using:
- Flex SDK 3.5.0
- Parsley 2.2.2.
- Flash Builder 4
Down in my src folder (which is configured as part of the source path in the Flash Builder), I have a logging.xml which I configure via Parsley:
[Code]....
I have a web application that converts SVG files into swf ones. In order to do so, there are 3 steps:
1 - Running through SVG Files in a folder
[Code]...
i have this flex app (it's a flex project created from flash builder), and it compiles fine when i build it from the IDE.it fails to compile when i do it from command line through mxmlc.i am invoking the mxmlc at the location "flash-builder-installation"sdks"flex-ver"inthe mxml file is test.mxml.i don't have any dependency on any of custom swc file.i am getting the following type errors when i compile it.[code]
View 2 Replies