I could not play the parallel effect which is defined by the following code:
var parallel:Parallel=new Parallel();
var E1:WipeDown=new WipeDown();
var E2:WipeLeft=new WipeLeft();
parallel.addChild(E2);
parallel.addChild(E1);
parallel.duration=2000;
parallel.target=this;
parallel.play();
On playin the effect by calling effect() function only the effect E1 is getting played. If the code was:
[Code]....
I have the following application in flex. I want to call two different remote objects in parallel.
[Code]...
Now what the methods do is to print sth. when they are called, then wait 8 secs and print sth. after that. When clicking each button seperatly, it works, both methods are started in parallel. However, calling both method the same time, leaves one service to wait with its call while until the other is executing. How can I avoid that?
I have multiple spinning balls that I want to animate altogether. Here's what I have so far but when I play the parallel (spinning.play()), nothing happens.Where am I going wrong?
<fx:Declarations>
<fx:Vector id="kfP1" type="spark.effects.animation.MotionPath">
<s:MotionPath property="baseColor">
[code].....
I'm on Flash Builder 4.5 and I'm using remote object with amfphp and when I call two method (method1 and method2) at the same time the response of method2 always arrives after method1's response even though method2 is much more faster to return the result.re's the scenario:I set a remote object which refers to a remote php class "Newletter" which contains the sendNewsletter and getProgress methods.Here's the code:-sendNewsletter() reads the email archive and send the newsletter. After each email has sent it writes a log into the database.-getProgress() reads the log wrote by sendNewsletter, counts how many email have been sent, compares it with the total number of the email that have to be sent and return the progress percentageFrom the flex interface the users select a Newsletter to be sent and click on a "send" button which calls a function that calls the sendNewsletter() and then instantiate a loop of calls to getProgress (as you can see when getProgress returns something it calls the setProgress which updates a progress bar and calls getProgress again until the progress percentage reach 100%.
So right after I call sendNewsletter() I call getProgress() on the same remoteClass().sendNewsletter() can take several minutes to complete (in my tests for sending 4 email it takes about 4 seconds so I think that sending thousands of email will take much more!!) and the trouble I'm encountering here is that getProgress() result arrives only after sendNewsletter() concludes its execution while what I would like to achieve is:
In one function I am calling the play method on an effect and in another I am calling the reverse method. The play method works but the reverse method does not. It appears that the propertyChangesArray is used to store the previous effect start values but that property is null when calling reverse.
[Code]...
I'm removing a component from the WindowedApplication, using removeChildAt(), and want to play an effect (defined within the component, say mx:Resize) which reduces the height of the component (an hbox) to 0 before it is removed.
I was using the removedFromStage event within the component, but it just disappears (without playing the effect). I guess it's being removed before the effect is played. Is there a way to play the effect, which is preferably defined in the component, before the removeChild function completes?
I have a panel with a button in it. Clicking on the button will direct the panel to state "State2" adding another two buttons into the panel. During the state change, I want the panel to resize first and then show the newly added two buttons, so I applied transitions onto the state change.
My question is:
If I put the two buttons within a HBox directly under the addChild tag, it works fine. However, if I create a new component with the same code (HBox with two buttons in it) and then add the new component to the panel (Comp in the code commented), it won't show the resize effect.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" xmlns:local="*">
[Code].....
Weeks back I faced a wierd issue in the behaviour of flashplayer running on IE7 which is invoking parallel https calls. I have two SSL enabled servers one is listening on port 443 and the other is listening on port 8443 but both running in the same domain. I developed a flex client (using httpservice class) which sends parallel https requests to these two servers. When the number of parallel requests increases say more than 5 requests to each server, the fault handler was encountered with the error message:[code]After breaking my head for a long days, I got one solution which would work. This issue is happening only if we are sending https requests to different ports in the same domain. So rather than moving one among the two servers to a new domain, I got a new DNS name for the same destination. So presently I got two DNS names pointing to the same machine in which both the servers are mounted.Now that I am using a separate DNS name for the server listening on port 8443 and the old DNS name is used to hit the server listening on 443.
View 1 RepliesI want to develop the following program in AS3
main -> Async call A -----> join
|- Async call B ->|
|- Async call C ->|
[Code]...
It's a bit of decoration to go behind a logo. When the dMove var is commented out I get the appropriate line of squares fading in and out at random spots along the x = 78 axis, but when introduced nothing appears at all...
[Code]....
My problem occurs when I try to load multiple images in one class in AS3.[code]My problem with this is, that every complete-method receives the same image. Sometimes they all get img1.jpg, sometimes they all get img3.jpg....I don't have any clue why this is happening.[code]Now the different Bitmaps and Loaders have distinct names and are called within the same method call. The event handlers now are inline.
View 2 RepliesI want to dynamically load several png images from 6K to 2,5M. I create the loaders in a for loop and start them all at the same time, and listen Progress, Complete, IOError and SecurityError on each loader. The problem is the COMPLETE events are not always fired, even if Progress events show all images are fully downloaded.
I tested with Firefox and Chrome, I load 4 images 2.5M, 2M, 1M, and 6K, then I just get 2 or 3 COMPLETE events, sometimes the 4 are fired with Chrome. Did not find any workaround. I tried to listen ProgressEvent and call the completeHandler when bytesLoaded == bytesTotal but the loaderInfo.content is null (and bytesAvailable =0) so I can't get the Bitmap.
1) Is there a known limitation in the number of simultaneous loaders, from flash player or browsers ? Does Adobe recommend to have queued loaders instead of simultaneous ?
2) Is there a way to get the loaded Bitmap when COMPLETE is not fired ?
3) I don't keep the loaders in a property of my class, and use weakReference for the listeners : the issue can come from my code ? (but the ProgressEvents are received until the download is complete)
We have a flash website built using flex and CS3. Majority of the site has been done using flex. We have multiple flash movies on a page and we obviously have the page loading very slow. Now that we are looking into options for making the page fast, we are trying to understand whether we can run these flash movies in parallel ? Is there some provision in CS3 to make the flash understand that this object will be loaded and ran first and then the second object.
View 2 RepliesI want to put a twist on Kirupas excellent snow fall tutorial...
Say I design multiple movieclips (snow for Christmas, pumpkins for halloween, fireworks for bonfire night etc) can I use AS to detect the users local date and call the relevant symbol to rain down?
I've put a blur effect on the hit state of a button, but the script for the button is On Release Go to and Play the scene I wan't it to skip to. So as soon as the button is clicked it does what it's told and the blur effect (16 frames long) doesn't get to play.
View 5 RepliesIm an aspiring flash game developer struggling with a bit of code in my upcoming game, I want to play a sound(A "ding") everytime the main character touches a cookie on stage. The main character follows the mouse cursor, and the cookies fall down from the sky.
I have scripted the cookies main class, with this function(which works fine)
private function eFrame(e:Event):void{
Code:
private function eFrame(e:Event):void{
this.y += 3;//move the bell slowly downwards
if(this.hitTestObject(_root.mcMain)){//if this touches the main character
_root.mainJumping = true;//make him jump
[Code].....
And I was hoping it would go into the library and play the sound bit named "bellSound" but it doesnt do this, instead nothing happends, not even any errors under the "Compiler errors" So no im a bit lost, as I do not know how to make this work, so a sound is played when the main character touches the cookie.
layer 1 --> an embeded video
layer 2 --> an invisible button
**Here is my code in layer 3**
stop();
var vid:Boolean = true;
function vid_event(event:MouseEvent) {
[code]....
I already get the play and pause fuction (that's all i need). I just want to add an image to show when the video still not playing in and pause. If the video played the image will disappear and if pause the image will appear.
I have a movieclip. And I try pause n play together with sound. But I can't do it. This my code in one frame just play pause movie clip without sound..
MC_play.onRelease = function(){
hal_satu.play();
sound1.play(sound1.position);
} MC_stop.onRelease = function(){
hal_satu.stop();
sound1.stop();
}
1. And must fill the sound in movie clip or in frame?
2. How I can play n pause the sound with code?
I'm completely new to AS3. Being completely new to actionscripting I found a tutorial on how to create a typewriter effect, which I have successfully made into a movie clip. My problem is that I want to stop the movie for the typewritten text to appear and make the movie pause for a pre-defined number of seconds and hereafter continue to the next scene or frame or whatever is the most easy. The link for the file text.flv: [URL]
View 1 RepliesI have a movieclip within the "over" section of my button, which contains both an roll over and a roll out animation. My problem is that I cant seem to get flash to play the rollOut animation.
I placed the following code in the button itself
on (rollOut) { this.start_mc.gotoAndPlay("mouseOut");}
I tried setting up a function to find when the user rolls off the button but it didn't work either.
This is the sample code of what we are using in my project The way which we are using to apply effect when using removeAllchildren from viewstack.Requirement is when i click on second button the canvas which i was created dynamically has to remove with wipe up effect how can i put effect with using removeAllChildren method.
View 0 RepliesIs there a way to disable the hover effects?I don't want flex to highlight the entire component for both link buttons and menu bar.On the menubar, I applied a backgroundSkin, so having flex highlight the whole menubar when the user hovers their mouse on top quitely destroys the design.
View 1 RepliesHow can I use TweenLite to implement effect of Flex's PopUpManager?
View 1 Replieshow we add effect in datagrid when we add or remove any row.
View 1 RepliesFlex Effects include "isPlaying" property to check whether Effect is currently playing or not. But is there a way to find out what is the direction of playback (whether the play was started with playReversedFromEnd)?
View 1 RepliesI have an application whit accordion
<mx:Accordion minHeight="200" includeIn="radegund0" top="10" bottom="10" left="10" right="10" openDuration="2000" openEasingFunction="{Elastic.easeOut}">
<s:NavigatorContent width="100%" height="100%">
[Code]......
but when click on the second tab for the first time the content is not shown until the effect is over.
I would like to know how I can add maximize and restore functionalities to a Flex TitleWindow. I used something like this <s:Button label="maximize panel" click="Panel1.height = 300;Panel1.width = 300"/> where Panel1 is the id for TitleWindow but there was not effect for it.
how to add buttons on the titlewindow title( so that I can include buttons for maximize and minimize).
I am trying to make the AdvancedDataGrid blend into the background by setting contentBackgroundAlpha=0. It doesn't do anything. How come?
View 1 RepliesI need to create a sort of 'flex' effect for a box, with a circle at each end. If on one side of the movie clip I want the end to go upwards or downwards towards the mouse. Sort of like rubber, and I need it to be anchored at the center, sort of like a piece of rubber that is held at the center.
View 14 Repliescheck out: [URL] The typewriter effect here is very fast, much faster than when I use onenterframe to produce the effect. Does anyone know how this is done?
View 14 Replies