I have a datagrid which has id="myGrid" in my application, from it I call a component. Now from the component I can call parentDocument.myGrid.selectedIndex = 0; and it works fine.But I want to make the component reusable, and I would like to pass the ID to the component each time, so myGrid will change, how to properly send the ID to the component, and use it in the component?
View 2 Replies[code]Now, the above code works fine for some people using our software while others are experiencing the following error ( in faultHandler() ):[code Again, the error happens to some people and not for others.Have I missed something? Would it be a machine / browser specific problem? As a sanity check the above code works with the same .swf file in chrome, ie, firefox and safari.I have read about the crossdomain.xml and don't think that is the issue as YouTube have that defined.Finally, all users (intranet app) are using IE and the same version of flash.I have been pulling my hair out the past 2 days and asking the question over and over again "Why is it only happening for some users and not for other users?"
View 2 RepliesI have two labels (A and B) in a Flex VBox, with the horizontal alignment set to "center". I'd like to set A to be vertically centered (in the exact center of the container) and B to be underneath A (or on the bottom; either will do). What's the best way to rig this?
View 3 Repliesi have a problem accessing the objects present inside an array.
For example,
var array:Array=new Array();
var obj:Object = {};
var int a=1; var int b=1;var int c=1; var int d=1;
[Code]....
Later I am able to get the array length but how can i get the values inside the objects??
One more thing is i am sending this array to php so how can i access the object values inside an array in php.
I have drawn colored rods which I have placed in the library and have put one of each on the stage with instance names likeblueRod_mc, etc.I place them around with time-line code like
blueRod_mc.x = 300.0;I have now created an Actionscript class called Problem.I build a new object from Problem which I have called Riddle.But when I put blueRod_mc.x = 300.0 in a method (of Problem),I get the message that blueRod is not accessible.So I triedstage.blueRod_mc.x = 300.0;That did not work either.
I'm getting occasional ConcurrencyError faults when using HTTPService in Flex 3. I have four HTTPService objects, all configured with concurrency=single. I'm not sure though how to continue to diagnose, as I don't see in the FaultEvent what service object caused the issue, and I can't easily reproduce it on-demand.
One feature of my app is that I am also using a URLRequest to load a sound shortly after receiving a result from one of the HTTPService calls. Could this be related to the concurrency error?
The fault looks like this:
[FaultEvent fault=[RPC Fault faultString="Attempt to invoke while another call is pending. Either change concurrency options or avoid multiple calls." faultCode="ConcurrencyError" faultDetail="null"] messageId=null type="fault" bubbles=false cancelable=true eventPhase=2]
After upgrading the Flex SDK from 3.1 to any newer version of the SDK and trying to compile an existing project, the following error appears in the Problems pane:
Description: { expected Resource: (shows project name, not a specific file) Location: line 15
Any ideas how to solve this or where to start the bug hunt?
It looks like the problem is in the ...sdks/3.3.0/frameworks/libs/player/10/playerglobal.swc file, but I'm certainly not sure.
My flex application generates individual pdf documents based on individual selection criterion,but i need to merge those generated pdfs or is it possible to store individual pdfs temporarily then merge those into single pdf?
View 2 RepliesI want to create flex application by which i can verify user age i have use following code can u tell me why i cant see mx component "dialogtitle","dialogcontent""dialogbutton"
<?xml version="1.0" encoding="UTF-8"?>
<mx:VBox creationComplete="{initComponent();}" height="219" width="560" xmlns:mx="http://www.adobe.com/2006/mxml" xmlns:components="components.*" xmlns:local="*">
[code].....
I have a modal Flex dialog and want to make the background not of the window itself, but the semitransparent modal indicator transparent. (Yes I tried to convince the client they don't want to do this, but apparently they really want to do it). Is this even possible?(prefer a solution using Flex 3's TitleWindow, but Spark/Flex 4 TitleWindow is acceptable)
View 3 RepliesI have an area graph and I'm looking to have the data points to be shown. I have a CircleItemRenderer, but this shows all of the datapoints in the default stroke and fill. 1) How do I customize the display of my CircleItemRenderer? (instead of it having an orange fill, how can I change the color?
2) How can I decide to show the node for specific data points but not for others? For example, in my .XML file that imports the data for the graph, I may have a variable show_data_point which is true or false.
[Code]...
how can I hide an element in Flash Builder? I can do visible=false but the element is still there (other buttons are not centered). I'm looking for display:none style property.
<mx:HBox horizontalAlign="center">
<mx:Button id="publishButton" label="Start" />
<mx:Button label="Stop" visible="false" />
</mx:HBox>
I have a problem with inline components. I want to reach an inline component from another one.. From the first component, i want to change "enable" value of the linkbutton named "Add" which is in second component. Altough i gave "id" and "className" to second one, i could reach neither it nor its elements.. is there a way to do this?
*in first component there is a text input in "CodedDescriptionItemEditor" component. I want to validate it and according to validation enable the button that i mentioned above..These all are in a datagrid by the way. In datagrid, there is always a row that you can enter data and via the "Add" button you can save it. After save it seems as text..
Here is my code:
<mx:columns>
<mx:DataGridColumn headerText="{Problem}" wordWrap="true" textAlign="left" sortable="false">
<mx:itemRenderer>
[code]....
I have a flex grid where I have the verticalScrollPolicy="auto".But every time when the scrollbar appears all the columns get pushed to the left, making the columns not align as they should. I tried setting minWidth on all the columns to prevent this,
View 1 RepliesWe are migrating our Flex-3.2 application to Flex 4.1, mainly to take advantage of the new text flow/engine features. In a first step we decided to go with compiling for MX-only and in Flex-3-compatibility mode.
[code]....
Now do the same in Flex 3 and you'll see both events fire.Apparently, this is a bug. Might be possible to work around this but certainly decreases my level or trust substantially.2) Dialogs/popups show all content mirrored.A bug as well. Easy to work around, but how could something that obvious slip?
[code]This code is drawing a colum chart with two columns and drawing a line across the top of both columns. I have two requirements: the line need to be dashed as of now the line starts from top right corner of the first column to the same corner of the second column. How can i shift the line to the left, so that it starts from center of first column to center of second column.
View 3 RepliesIn the .NET world order, companies like Telerik provide awesome sets of components for web/windows/silverlight. Who are the equivalents in the Flex/Flash universe? I see lots of sites filled with little 10/20 dollar menu components or uploaders, but I'm really looking to find something a step above that.
View 1 RepliesIn Flex3, I could compile pure as3 code and use "embed" tags to load in images. This was done by Flex making a BitmapAsset class.I can still do this in Flex4.
However, there was a trick to fakeout flex3 and use my own mx.core.BitmapAsset class to remove some of the extraneous stuff Flex's BitmapAsset brings in with it. This is described here: [URL]..Unfortunately, I cannot get these tricks to work with Flex4 and get smaller file sizes. I end up with the error "VerifyError: Error #1014: Class mx.core::BitmapAsset could not be found."[URL]..Following this advice, I add -static-link-runtime-shared-libraries=true, and my swf loads without an error... but this means I am loading in the pieces of the flex framework I wanted to omit (and the file size says so too).
Is there a better way to fake out flex4 when it comes to using Embed?
Is there a way to export Table data to a MIME Resource(Flex3 component) from Web Dynpro?
I have a flex3 component(US heat Map) which accepts a arrayCollection (state and value pairs). I need to create a webdynpro wrapper for this to use in Visual Composer 7.2.
What I am trying to do is migrate the flex components I made for Visual Composer 7.0 (using a VCXL wrapper) to Visual Composer 7.2 using web Dynpro. I have managed to migrate components which require simple input data types like integer or string, but I am stuck at those which require complex structures like an array collection.
I'd like to be able to access some objects which are on the stage before compile time (e.g. in my .fla file). I can do this fine from the document class using the names I've assigned to them, but I need to be able to do this from other classes (instantiated at runtime) too.
What is the best way to go about this? Can I use the stage variable (this isn't looking likely from what I've read so far) somehow? Or do I need to pass in references to these objects from my document class when I create the instances of the class that needs to access them?
I'm working on a flash video player and I'm trying to figure out how to access something inside the constructor that I know is set but it keeps telling me its not.
[Code]....
now in the metadata function its giving me the error, "Access of undefined property video" Now, am I just completely not understanding how classes work or is this a common problem?
I want to access an object from a class in which it was not created in. I have a main class (A) in which I create and instantiate an object (of class B), from this class I can obviously do whatever I want with the object, no problem. The issue I'm having is another class (C) needs to access the object in question to change its x and y location values. Class C doesn't know what the instance of class B, created in class A, is; this doesn't surprise me, but I can't figure out how to allow class C to get access to what class A created.
View 7 RepliesHere's my code:
Code:
function loadProjects(loaded){
if(loaded){
projects = this.firstChild.childNodes;
[Code]....
the traces within the function return correct results, however when trace values of the arrays within the function and created by the xml are attempted results are returned 'undefined'.
Why can I not access arrays made in this way from outside of the function?
I am working on a feature for an application that requires Flex 4 functionality. Due to some migration issues of the application from Flex 3.5 to 4.0, I have decided to implement this feature as a module that is compiled with Flex 4.0. The theory is that the application would remain compiled in Flex 3.5 and load the module when it needs it.[code]
View 1 RepliesIf objects are created dynamically in AS3, using code like this:
for (var num:Number = 0; num<10; num++){
var txtFld:TextField = new TextField();
txtFld.text = 'This is the original text';
this.addChild(txtFld);
}
then later, i want to changet the text of one of the TextFields, how can I do that? The only instance listed in the variables is a single instance of "txtFld" and it is the last one that is created. How can I access the others?
I have a stage with instances of bauble_mcs on it that are attached by the document class of the main timeline (can someone tell me what the right term is here? I don't know what I call the main time line in AS3).
I then have instances of snow_mc attached by the same class. Inside the snow_mc I want to test to see if it is hitting any bauble_mcs but I don't know how!
[Code]...
have a button on the stage that you called "myButt". Now suppose you want to change its size. You write:myButt._xscale = 25;Now suppose you don't know it's name, but you get the name from another variable:buttname = "myButt";How do you change its size then? in some compiler languages you can expand the string buttname into its value at compile time, with special flagging, such as:
View 4 RepliesI have a mc in my library called recentArticlesButton, exported as a movie clipHere's my code:
Code:
public class ABCDEF extends MovieClip {
private var recentArticlesButton:RecentArticlesButton = new RecentArticlesButton;
[code]........
So I have a menu built inside of Flash CS4 that has a graphic for a background and five text fields that sit on it for menu options. The whole thing is saved as a movie clip in the library. The text fields all have instance names like infoBtn and mapBtn etc. and the menu is already on the stage and linked to it's own class in the library. My problem is accessing those text fields on the menu from the class. I keep getting "Error #1009: Cannot access a property or method of a null object reference." and the menu doesn't work. But if I trace the infoBtn.text in the class it outputs the text that is in the text field. So the code is accessing it but it's still not working?
Code:
package classes
{
import flash.display.*;
import flash.events.*;
[cODE].....
loop run a function to add Objects to fall upon stage, how do i have my function access random objects within an Array to replaced Platform1
function addPlatform1(){
var p:Platform1 = new Platform1();
stage.addChild(p);
[Code]....