I have all the graphics together,I have a .swf file that is to large it will not play at desired speed. The background images need to run 882 frames while the rest only needs 210 frames. I want all the layers to loop. I am trying to preload the 882 frames but don't know how to.
View 1 RepliesI need to grab just one frame from an external swf file. Though, I'm not even sure if it's possible. So, my alternative is to try preloading just a few kbytes of the .swf and use those within a container movie clip, stopping the entire file from being loaded.
Ideally, this would use very little bandwidth, as this method has to be repeated numerous times on one page, with LARGE swfs as the target. I have no difficulties with preloading the swf, but stopping the process once it's started is not documented anywhere.
If not, I will have to 'open'->'export image' about a trillion times.
So I have a movie containing some content that I would like to pre-load. I made the pre-loader and it works fine but it could be more friendly for the user. Because the movie is quite long in duration, I think its good enough if I only load say the first 35% of the movie and then let the remaining 65% download while the user is watching the first 35%. Is there a way that I can modify my pre-load script to do this to say something like: 'load content for frames 10 to 200, play from 10'.
[Code]...
I am trying to eliminate the Loader component from a project. Run locally, the Loader is sufficient to load-up the voiceover swf files that exist on many of the frames in the parent file. On the web, the short download delays at runtime due to the Loader are causing timing issues. I'm not sure if there is a way to preload multiple swfs into specific frames of a parent file so that they are available before runtime.
View 4 RepliesI've a preload bar in my movieclip that i add on the stage for every thumb. With this code only the last preload bar does the preload...the others don't do anything...Here the code:
[Code]...
I want to create a preloader that plays a certain amount of frames as it loads the rest of the frames. So, I have labels on the frames basically and need a preloader to play the "loading" frames as it is loading the "content" frames. Does that make sense? I have no idea how to even start this one... p.s. I am using AS 2.0, but if it can be done in 3.0 easier, I can switch over its no biggie
View 4 Repliesthere seems to be no accepted method of playing multiple flv using buttons. My latest attempt has me putting multiple instances of the flvPlayback component in different frames and using buttons to navigate to those frames. It works but nothing anyone has posted anywhere will result in removing the flv when you go to a different frame and instance. This was simple in AS2. Load movie to a traget and each time you load a new movie the other one goes away. REALLY goes away.
View 7 Repliesbasically im making a quiz on my main timeline ive got my questions and answers and on the last frame i want it to say how many answers the user got right. ive made a movie clip on this last frame. in the movie clip ive got 11 frames with the posible totals so frame one would be 0/10 frame 2 would be 1/10 etc what i want to do is when the user clicks the correct answer on the other frames i want flash to make the frames within the movie clip to go 1 step forward.
View 2 RepliesI have a function that counts days and some other variables and displays the values via dynamic text.
[Code]...
I have to place the incrementCount(): function every 12 frames so that it increments the values. Seems like it would be easier to simply modify the script to count "every 12 frames" but I can't find anything that tells me how to "count frames" in flash. Seems to be this is probably basic but I've searched unsuccessfully....so how do you do this. How do I get my script to work so it's frame based so I don't have to put incrementCount() every 12 frames?
Is it possible to have an movieclip of about 50 frames and navigate between these 50 frames? As if u put a marker on frame 10 and one at frame 30 and if u use a button it plays to frame 10 and stops and use another button to go from frame 10 to frame 30 and stop... and reverse if u use the earlier button.
View 5 RepliesI want to preload all of the voiceover swf files before a lesson starts so that they are instantly available when each frame / page that incorporates a voiceover is first visited.
View 4 RepliesI have a site with several images on it. there is a main image with buttons on it, and each button load a series of images (simulating a zoom) What i want to know is if there is a way to preload the external swf (the ones each button loads) while the user is looking the main movie, so, when he presses a button, the external swf plays inmediately and there is no "loading" time. I try several ways and google it and find some tutorials but no one works.
View 14 RepliesIn order to put some dynamic content into my flash site, I have used loadvariables in order to retrieve into variables some html content.I have also used dynamic text (renderred as html) in order to retrieve the values of those variables (using Var parameter).My problem is that whenever html indicates <img> tags, those images are loaded when the dynamic texts first appeared in screen.
View 5 RepliesI have 3 swf containing FLV instances, and one main swf file. There are buttons on the main file which link to preloaders for the other 3 swf . I have created 3 separate preloader swf for the 3 sub pages, using movie clips and this [code]...
View 2 Repliesi want to make a preload. I search a lot and i make one preloader with 100%. But i want instade of 100% i want to load a movieclip tha i make and when the movie clip goes in 47frame (last frame) the goes to play the next scen.
View 0 RepliesI'm currently doing my first project in Flash.My client has complained that it pauses after the start of the animation when loaded through a browser for the first time.They are asking me if I can set it up to pre load the animation.
View 6 Replieshaving a few problems with preloaders - starts loading at 50% i want to preload everything in my swf. I have the preloader action on my first frame (along with the sounds)
[Code]...
how can i make a preloader load multiple external (mp3) files before entering the site itself?
View 1 RepliesMy clients have alarge flash presentation (kind of microsite) which is 18MB of size.How can i embed it to their site, and have a preloader for it.The Clients dont have the FLA, as the developer didnt provide, as is out of reach.I am a Zero-Flash knowledge, just a small time web (CSS/HTML) developer.[URL]
View 5 RepliesI am having a movie with 8 scenes and being in Thailand where the internet is slow I would like it to preload before it opens because now, after it opens a lot off the stuff ain't there yet like buttons and animations that are built into different scenes.
View 2 RepliesI've almost finished my flash website for a friend and just want to add a simple MP3 player.I have the following code which reads an XML file and loads the mp3s referred to in it and plays them... this is all cool...(i've removed the bits for the buttons as i didnt think they were relevant)what I really really want to be able to do is buffer the MP3 files so that they begin playing when 1/2 loaded or similar (ideally preload 1/2 of track 1, play track 1, when track 1 loading is complete start preloading track 2 etc.)I just cant work out how to do it...
var my_songs:XMLList;
var my_total:Number;
var my_sound:Sound;
[code].....
I have 3 swfs containing FLV instances, and one main swf file. There are buttons on the main file which link to preloaders for the other 3 swfs. I have created 3 seperate preloader swfs for the 3 sub pages, using movie clips and this code:
[Code]....
It preloads just fine, but it doesnt preload the FLV contained in each swf. It just preloads my 200kb swf file, not the contents, so my movie still has to wait to play. how can I get my preloader to preload everything so that when the SWF comes up, all data will be loaded and I can click through to the end of he FLV movie?
I have made an xml slideshow but my issue is that the images take a few seconds to load when going to the next image. I want to put a transition between them but because of the loading time it doesn't work right. way to getting all the images to preload?
View 1 RepliesI've searched around and seem some other examples but nothing that I really can apply and to be honest, some of them I got completely lost! (I'm obviously a designer rather than coder)[code]...
View 9 RepliesThe code above is my standard preloader for swf, I use it since long time and its all working, I managed above the script another one that load the flv?s that I use in the array. The two are working but my need is that the container only start to play the module after all the flv?s have been loaded to the cache.
One thing to note is that in the second script the array is playing the flv?s when should be only load, I?ve try to give a ns.pause(); but if I do that the array dont get to the end of it.
I'm using the following to load an external SWF. I was wondering if I could preload it with a progressive bar. Can only find preloaders for MCs.[code]
View 1 RepliesHow can I preload just movie clip from library?
This code is loading external file, but I need only one mc from library of actual fla.[code]...
I have a main movie which loads another swf using the Loader class. Once the sub swf is loaded, the sub swf will call an XML to get a dictionary and translate all the text to one language or another. Since the preloader will not take into account a call to an external XML, would this be the correct way to do it? It's plain text but I'm not sure if I will get blank text for a few seconds if a user has a slow connection.
I thought of maybe using dispatchEvent on my sub-movie to tell my parent that the xml is loaded and THEN start the game. What do you think? Any better alternatives? I also checked out LoaderMax (from greensock), since it seems it has some functionality that enables you to take into account external calls from your main preloader... But I haven't tested it out yet.
I am becoming crazy because I really don't find a way to preload the texture image which is automatically loaded by the DAE class.
All that I want is to display the progression of the image loading, before displaying the DAE.
The program works just fine, and I am able to play the vídeo.flv in the augmented reality, but i need a preload for this because the flv is about 20Mb... how can I begin to add a preload to this project?
View 1 Replies