I have 2 buttons, and each of them have a movieclip. When I press button 1 a movieclip is played and the same happens with button 2. What I want is a transition effect. When people press button 2, things from button 1 has to live the screen with a transition, I mean, another movieclip.
View 1 RepliesHow can I add a Squeeze transition effect between frames using the transition manager class on a simple slideshow using the goBack and goForward functions in ActionScript3? Below is the code I have so far:
stop();
function goBack(event:MouseEvent):void
{[code].....
i have a snow effect in a movie with the code below. i want to stop the effect midway through the movie without stopping the movie. how do i use a stop command to do this?
init = function () {
width = 550;
// pixels
[Code]....
I created a movie clip which plays ok. But when it ends there is a slight jump, if you will, when it goes back to frame 1 to begin playing again. Does anyone know how to make the transition unnoticeable from the last frame of a movie clip to the first frame of a movie clip?
View 4 RepliesI'm running into a problem with my transitions. I want to be able to transition out of one area of my site and into another area of the site without going in sequence. For example, I click the "about" button and the text/images transition onto the screen properly, but then I want to click on the "contact" button (or any other button) and have the about content transition out of screen and then trigger the transition to bring in the new content. If they were all in sequence I understand how to do this, but since there is no order, how can this be done?
View 1 RepliesI have got one box to change colour but im trying to get all boxes to change into different tints and stuff like that. I have the variables set and they seem fine. What do I need to change on the actionscript to get all 3 boxes changing at once.
View 3 RepliesI'm trying to do a transition in 1 movie.. Basically the Navigation..
5 MC's (one for each nav)
clicking on nav item1 would start the item1 MC that plays until frame 10 (which is the middle of the ani)..
clicking on nav item2 would start the item2 MC that plays until frame 10..
well i'd like to have nav2 say "if any other nav is open, play their frame 10->"
item1 (open)
item2 (opening) then item1 (closes)
CS3 Flash - Complete newbie to Flash and I'm trying to change an existing flash piece.It consists of 4 different text statements that appear on a Black background - the first appears and stays on-screen for 10 secs, then it starts to blur and fade away in about a sec, and then the next statement appears, etc, etc., and the whole lot loops.The 4 statements appear as Video Clips (Symbols?) in the library.I need to add a new statement, which means there will be 5 statements. I duplicated one of the library items and renamed it, which seems to have worked fine... but I cannot then work out how I insert that video clip into the Timeline and still have the same visual effects and timing as the existing ones? I can insert a blank frame, but then I can only drop the new video clip text onto that one frame.I've tried copying and pasting a whole set of frames, and then go in and change the text. Which I thought had worked, but then discovered that it also changed the original frames.... now understand that's because they are just instances and any change will affect the master Video Clip!
So can anyone advise if I can insert my newly added and renamed video clip into the timeframe and create the same effect as the others?Please keep any advice as idiot-proof as possible as this is my first venture into Flash... not finding it as intuitive as I hoped, spent 6hrs to date just trying trial and error without any real success.
I have a motion tween that is 180 frames in length. When the tween ends on the last frame and returns to the first frame to replay there is a slight jump in the tween. Is there anyway to stop the tween from jumping from last frame to the first?
View 3 RepliesI've been trying to find this topic on the internet for what seems like forever but haven't had any luck. What I'm trying to do is remove a child movie clip and have an alpha transition when it is removed.
What I have so far can be found at: [URL]
Basically what I'm trying to do is when the video player is closed, instead of simply disappearing, I want it to fade to an alpha value of zero
this is the code I have so far:
ActionScript Code:
stop ();
MC_btn.addEventListener(MouseEvent.CLICK, vimeo_embed);
function vimeo_embed (e:MouseEvent):void {
var OpenEmbedPlayer:Vimeo_MC_PU = new Vimeo_MC_PU();
[Code].....
I have approximately five external movies I am loading into one main movie. I load the movies using various buttons in the main movie.
My issue is this...I press a button and the first movie loads and then runs to the end of the timeline. Works great.When a push a second button the second movie loads and runs to the end of the timeline. Works great also.but I hate how there is a blank space between the movies.
All the movies start with a white stage and end with full graphics. When I press a second button, the movie on the stage disappears immediately and I am left with a white stage for a few seconds while the loading movie animates onto the stage.
I want there to be a cross-fade or some effect that allows the loaded movie to remain on the stage while the second movie is loading. Is there a way to make this happen?
I'm including the code I have for loading movies so you can see what I am working with thus far.
Here is the code:
designingbutton.onPress=function(){
loadMovie ("Quest Wall Animation.swf", "_root.content");
}
specifyingbutton.onPress=function(){
[code]....
I want to be able to make a movie clip (that acts as a button) so the roll over effect finishes before the roll off effect is triggered. Like if a marker circles a button, i want the circling animation to stop before the roll off effects happens. Anyone know how to do this.
View 2 RepliesAll works fine untill I do something to the loaded swf.For example if I click a button on the loaded swf the button works but then when I click the button on the main movie to load the next and play the transition the transistion doesnt work.If I dont do anything to the loaded swf the transitions work.Is it something to do with the paths being changed when the loaded swf is acivated?
View 2 RepliesI created this for my students but would like a simple transition effect to add between each frame.
View 7 Repliesis there a way to add transitions effect to every letters in a string in actionscript 2? i know how to split the string into and places it into array but how do i apply transitions effect to it?
View 0 RepliesI have loaded an image through code and i am now trying to apply the PixelDissolve effect to it.I am currently receiving the following error:1067: Implicit coercion of a value of type flash.display:Bitmap to an unrelated type flash.display:MovieClip.[code]
View 6 RepliesI've been asked to incorporate a slideshow into a website that I'm working on, which is fine, except they have seen a particular tranition effect that is used between images, this can be seen on these two sites...[URL]. Its kind of a bleach effect? Which I presume is achieved using some sort of tween engine like Tweenmax or the Fusekit? The Honda site also has a nice second transition effect which is pretty cool, where dots kind of fall away? Has this just been done on the timeline?
View 1 RepliesI have my main movie which loads an external swf. This swf loads different images (loadMovie("image.jpg", _root.photo.empty);How can i make each image load with an effect?
View 3 Replieshow to make this effect transition images? [URL]
View 2 RepliesHere is the .fla, I'm hoping to speed up the cube effect transition. I've been toying with the variables, and nothing is working...perhaps it works off the grid somehow? You can download the file here, it was too big by 150kb to upload here, If the download doesn't work, here's a link to the page I found the transition effect on, it's the bottom flash video. [URL]
View 4 RepliesI was looking through the tutorials on kirupa and i stumbled across the dynamic animating mc's and i was intrigued. So i made a canvas graphic real quick and imported it into flash and tested it out. at first it didn't look so good not like paint on canvas, then i changed the blend to overlay and it looked much better.I would like it to have a smoother transition so you don't notice the circles and no jumping.
View 2 RepliesI'm trying to use an onUnload transition on several movieClips, but the transition doesn't seem to take effect. the clips are just instantly vanishing. I am using AS based Tweens to handle this, btw.all other clip AS is working correctly.
View 2 RepliesDoes anyone know how this is made ? "LoadMovie Image Transition Effect"[URL]
View 1 RepliesCan you tell me how to make effect from 8 second in movie? I talking about this cicles <blue lights> [URL]
View 6 Replieshow would one go about replicating it or something similar. I like the way the images transition between each other and the hover over zoom effect. [URL] Is there any tutorial on how to achieve something like this or close to it?
View 3 RepliesI have a 30 frame flash movie with a Bitmap image for a background and a Graphic with a Wipe-In Transition, but when I play the SWF file in Flash Player, the movie loops. Is there a way to stop this? It has to be in .swf format, can't be .html.
View 7 Replies[url]... in first site after loading complete there is a transition that bending all page.i saw this effect before some other sites but i cant find any example.i am sure it is built with pixelbender.
View 1 RepliesI'm building a dynamic gallery that supports SWFs for individual slides. In order to prevent background sound from carrying over from a previous slide to a different category page, I have attached stopAllSounds(); to navigation menu buttons. It does its job, but it turns off the sounds abruptly. I'm using alphaTo for transition effect from one page to another, and I'm wondering if there is a command that stops playing all sounds in gradation, so that I can make it consistent with page transition.
View 5 RepliesI'm trying to do transition effect with Tweener class.I read the documenation of tweener class, but it didn't solve me problem.[code]
View 2 RepliesI have a swf which has a UI loader component. I have to fade it in & have a pre loader while it takes time for the image to load.
View 1 Replies