Seeing My File After It's Loaded On Server

Aug 17, 2004

I loaded a swf file in a dreamweaver cs3 and tested it on a browser and works fine. However, after I uploaded everything on my server.. I don't see the swf anymore.. I loaded the scripts AC_RunActiveContent.js.. [URL]

View 5 Replies


Similar Posts:


Media Server :: Server Always Starts With A Particular Application Loaded?

Apr 4, 2011

The server on which FMS was running crashed due to a power failure. FMS is set to start, and it restarted with the server.Unfortunately it restarted with no applications loaded, including the application, which we need to run continuously.Is there some way to ensure that the server always starts with a particular application loaded? The only way I could find to load it was through the systems console.

View 1 Replies

ActionScript 2.0 :: Control One Loaded SWF File From Another Loaded SWF File

Feb 7, 2005

Is it possible to control one loaded SWF File eg.(MOVIE-1.swf) from another loaded SWF file eg.(MOVIE-0.swf) on a different level? eg. with a syntax like:

onRelease
_MOVIE-1.SWF.gotoAndStop (4)
or:
onRelease
gotoAndStop (MOVIE-1.swf, frame4)

View 1 Replies

Media Server :: Save To File Live Video Stream In Server?

Apr 27, 2009

I use FMIE and FMLE.how can i do save to file Live Streaming in server installed fms, not local system ?

View 1 Replies

Media Server :: Write Bytes Server Side With File Class?

Sep 18, 2009

Does anyone knows if it's possible to write some bytes received from an AIR or Flex client in a server side file using the File class ? I have been trying for hours without any result.My goal is to store on the server side a swf file sended by a client in a ByateArray.Here is the code I have ended with, assuming that myfile.swf alreadey exists on the server prior to the code execution, and is at the right place, and that pBytes is a ByteArray received from the client which contains a swf file :

function writeFile( pBytes )
{
var myFile = new File( "myFile.swf" );

[code]........

View 2 Replies

Media Server :: Dynamicstream.f4m Not Working From Index File Of New Install Of 4.03 Server?

Oct 17, 2011

I'm doing a test install before we update our old server to 4.03.I've got the server software installed and configured (4.03 server, using iis for web).All the test stuff on the sample index page works, except for the dynamic stream tab.I've eyeballed the .f4m file, and tried putting in a complete url to the samples...but no luck.i just keep getting the stock connection timed out message. 
 
Where do i need to look to start confiriming where this issue may be coming from?I've made made sure I can reach all the test videos by making flash players for them, calling them via rtmp... no problems.It's got to be something dumb with either the f4m file, or the way it's being served   (btw, i have added all the mime types to iis , including .f4m as video/mp4....which is one of two ways I've seen it added).

View 3 Replies

ActionScript 2.0 :: Upload File Which Works In Php4 Server But Dont Work Inphp 5 Server?

Jul 15, 2010

i have used the following code to upload file which works in php4 server but dont work inphp 5 server.The flash code is as follows:

import flash.net.FileReference;
import gs.TransformManager;
//Allow this domain[code]....

i am uploading the php file.

View 1 Replies

Media Server :: Run FMS On Same Dedicated Server As Regular File Hosting?

Apr 17, 2010

Im picking up a dedicated server it will be CentOS and be well above the minimum req for FMS 3.5 Interactive.
Question: I want to use my dedicated server for more then just the FMS. Is this possible? Basically I want to use the same server for FMS and for the file hosting of my site. Obviously I would give it a different IP but am not sure what I will need to do specifically

View 3 Replies

ActionScript 2.0 :: XML - Get It To Preload The Contents/images Being Called In The XML File So It Doesn't Run As Soon As The XML File Is Loaded?

Jun 21, 2007

I'm building a flash movie for something at work and im loading in some images using an XML file but when i use a preloader it only preloads the XML file (as in just the text inside) and not the images.

This causes the movie to start playing without having the images loaded.Does anyone have any ideas about how i could get it to preload the contents/images being called in the XML file so it doesn't run as soon as the XML file is loaded.

View 1 Replies

ActionScript 2.0 :: Adding Pause,Play,FastForward,Rewind Controls To A Swf File Via A Loaded Swf File?

Jan 19, 2012

I will try to be as clear as I can. I have an existing swf file that I want to add Play,Pause, FF and Rewind via an externally loaded swf file that has the controls contained in it.I am loading an external swf file that has all of the controls on it via this code:

// Set up the Mouse to use a listener
var mouseListener = new Object();
Mouse.addListener(mouseListener);

[code].....

View 1 Replies

ActionScript 2.0 :: Adding Pause,Play,FastForward,Rewind Controls To A Swf File Via A Loaded Swf File

Mar 25, 2012

I have an existing swf file that I want to add Play,Pause, FF and Rewind via an externally loaded swf file that has the controls contained in it.

I am loading an external swf file that has all of the controls on it via this code:

// Set up the Mouse to use a listener
var mouseListener = new Object();
Mouse.addListener(mouseListener);

[Code]....

I am doing this so I can rollover the viewing window and have it appear. I cannot get any code to work to control the timeline (which is broken down into sections with individual MC's in each section.

What I am looking for is the code to apply to the buttons on the external swf file that has the controls to control the playing of the movie.

View 5 Replies

ActionScript 1/2 :: Loading Swf File Into An Existing Flash File - Script For Waiting It To Play Until It's Fully Loaded?

Feb 6, 2010

I have a flash file that is 1.5mb in size. As it takes about 6 minutes for someone on dialup to load this file, I have created a smaller swf file and loaded the larger one from it but I don't want the larger one to begin to play until it's fully downloaded. How do I set this up? I have set up the action script 2 as follows: loadMovieNum("top2.swf", 0);

View 7 Replies

Python :: Flex Mxml File Being Run On Server As Swf / Html File Be Made Non Cachable?

Apr 28, 2011

I have a application developed in flex deployed on server. In the application data is filled by user and saved in cookies so as to be available even when the user closes the application. However if new version of application is released the user can still access the older version saved in the cahe. How can it be assured that whenever a new version of application is released the application is loaded from the server and not from the cache and at the same time data saved in the older version (in cookies) can also be accessed in the new version.

View 2 Replies

Media Server :: Connection Failed When Loading .asc File On Main.asc File

Jan 6, 2011

Got a really big problem here. I keep on getting "NetConnection.Connect.Failed" when I load a .asc file on my main.asc file, i use the method load() in my code. I really don't understand why this happens, but when i comment out the code that loads the asc file, I can successfully connect to fms. I can't figure out what's happening here. Btw, i'm using fms4 in windows 7 32bit.

View 6 Replies

Media Server :: Setting File Name Of Captured File In DVRcast application

Jun 29, 2011

I've looked through the scripts in the scripts/ directory, but haven't seen anything obvious.

I would like to be able to specify the file name to capture the stream to. At present, the capture file is always named the same as the stream, which means if I stream for a bit, stop, then restart, the originally captured file gets overwritten. I'd like to be able to incorporate something, i.e. the stream start time, into the capture file name.

View 3 Replies

Media Server :: Advantage Of Writing A SSAS File Over An External AS3 File?

Jul 23, 2011

I do understand the differance between ssas and as3. Not all, but all most everything I see written in SSAS can be writen into a external AS3 file. This leads me to quite a few questions I'm hoping you kind people can shed some light on for me.
 
1)  What is the advantage of writing a SSAS file over an external AS3 file?
 
2) Can I write an .asc file in AS3 or do I have to use AS1? Please understand I'm using tuts from fmsguru.com and the books "Learning Flash Media Server" (pdf) and "Programming Flash Communication Server". I'm not a javascript programmer so nothing I do in AS1 seems to make any sence while everything I do in AS3 does. It may not seem like it to you people that are programmers, but to those of us that aren't, AS1 and AS3 are miles apart.
 
3) kind of off topic, but a security question. I'm not a "hacker" and don't like the jerks that are. My question is on external AS / SSAS files and swf files. When my fla is compiled into a swf does my external AS files remain external? I assume they do, but then what is the threat of the swf being decompiled? In most projects I would do I could care less if somebody had access to my fla as long as they don't have my actionscript files.
 
I don't know. Maybe on questions one and two I'm getting confused becasue I'm using out dated material. Again I assume that even though fms was built off of the javascript engine it should be able to read and execute my AS3 file. Other wise what was the point of the evolution of actionscript into a fully functional programming language?

View 1 Replies

Flex :: Fix The X & Y Axis Of Popup In A Swf File That Is Being Loaded In Another Swf File

Aug 26, 2011

I load a "cal" swf file in another swf files mdi_window. So the window is moveable inside the application. The issue is with the x y axis for the popups that open up in cal swf. The code for the function that opens popup is:

[CODE]...

The x & y axis of the popup act wired based on the location of the mdi_window in which the Cal.swf is being loaded. The x & y axis work fine if I move the mdi_window all the way on the top left corner of the application. The first image shows how the popup opens when I double-click on the 10:00 AM purple color event on my calendar.

and now when I move my window the popup moves to the side as well. I clicked on the same 10:00Am purple event again here: How can I solve this issue.

View 1 Replies

ActionScript 3.0 :: Let My Local Running Swf-file Access A Xml-file That Is On A Server?

Mar 9, 2011

How to let my local running swf-file access a xml-file that is on a server?

I have been to the "Global Security Settings panel" but dont really understand.

View 2 Replies

ActionScript 3.0 :: Upload A File On Server Using File Class

Feb 21, 2012

I am trying to upload a file on server using File class. Its working fine on local machine. But when i a placing the php file on server, it is giving Error #2038: File I/O Error.

[Code]...

View 0 Replies

ActionScript 2.0 :: Use Variables From Loaded File In The File

Feb 19, 2009

I've got a loadVars function, but I want to use the variables from the loaded file elsewhere in the file.[code]

View 1 Replies

ActionScript 3.0 :: Files Loaded On Server Not Working?

Jan 26, 2010

If I run the site locally on a web server, it works fine. BUT, when I upload to my hosted server, it stops working.I have an SWF that loads another SWF, using a relative path and as I said, this works perfectly well until I upload it.Any ideas anyone.. has anyone had a similar problem. Am using Actionscript 3 and publishing to Flash Player 10. Just so you know

View 2 Replies

Loaded Swf GotoAndPlay Works Everywhere But Off Intranet Server?

Jun 24, 2009

I am loading into my movie a super simple test swf ... a moving box over 100 frames that stops at frame 100 .... once its loaded I just move it out of site so I don't reload it ... when its turn comes up again I bring it into position and send a gotoAndPlay(1) code to it ... here's the weird part it works on my server, as well as in Flash dev environment but when the swf comes off of our corp intranet server it plays fine but that code does nothing

View 5 Replies

ActionScript 3.0 :: Accessing Loaded SWF Content From Server

Mar 30, 2010

I'm loading swf file from a server. For some reason I can't access movieclips that are not instantiated on the first frame, more than this - all movieclips that are not instantiated on the first frame and have some animation inside of them, won't stop looping, like there is no stop() action inside, but it is there. And even more than this - everything works fine when i'm using other server. Both servers have crossdomain.xml file that looks the same. I don't get no crossdomain errors and no other warnings. I'm using Security.allowDomain('*') function in both files.

View 3 Replies

Media Server :: Convert A .mpg File To .flv File?

May 1, 2009

I can convert .mov to a Flash file, but I can't even get an .mpg file to open.
 
Is there anyways I can convert this using Flah CS3 or any freeware that exist out there?

View 5 Replies

Compare A File In Cache With File In Server?

Feb 14, 2011

I have a flash movie that displays a list of movies. It uses an xml file to get this list.The xml file changes frequently.I'd like to know if there's a way with JavaScipt, to compare the xml file in the cache and the one in the server, if they are different, the script alerts the user and then refreshes the page.

View 1 Replies

Media Server :: LiveDocs Haven't Loaded For The Last Few Weeks?

Sep 8, 2010

I'm I the only one that can't load [URL] It just loads forever.  I somehow found out I can just add "index.html" to get it to load, but my bookmarks, and the links

View 2 Replies

Flash :: AS 3 - Clone .png Image Data Loaded From Server

Aug 8, 2011

I need to clone .png image data loaded from server in AS3, so that I am not required to load same data again and again from server. After a search on cloning image data in AS3 I was able to find following code over internet clone = new Bitmap(Bitmap(this._loader.content).bitmapData.clone()) By using this code I am able to clone bitmap data but the problem which I am facing is that my png background is transparent. If I typecast loaded png data to bitmap my icons background becomes white.

[Code]....

View 3 Replies

Flash Remote Images Loaded From Server On Other Sites

Nov 12, 2011

I want to understand something if it is possible to do it in flash movie. I want to make flash animation with let say 4 pics. The animation will be used as an advertisement on other sites. But I want the images in the flash movie to be changed from time to time. Thus I want the images to be loaded from my server while the movie is been shown on other sites. I want to know if this is possible in flash.

View 1 Replies

Media Server :: Streaming Loaded Video - Connection Error

Mar 10, 2010

I have installed a FMS to a CentOS server. I created an application here but I cannot connect to it raising a "Connection Error". I tried testing it by streaming some videos on the samples on vod. I used the "../samples/videoPlayer/videoplayer.htm" which is locally found on my computer that was included when I installed a FMS too on my local computer (Windows). When I try to load a video from my computer's FMS samples it usually works. I used the following Stream URL here:
rtmp://[MY-IP]/vod/sample.flv

But when I try to load a sample vido from the server I still get "Connection Error". I used the following URL
rtmp://[server-ip]/vod/media/mp4:sample.f4v
The file is located at /applications/vod/media/ which is as far as I know, the vod is the application's name and media is an instance name. Is there a sample working Stream URL on the internet that I can use to test?

View 41 Replies

ActionScript 2.0 :: Global Include Directory - Upload It To Server With The Flash File Or Does It Compile The Flash File With The Included Info?

Sep 9, 2006

If you have an .as file in the global include directory do you have to upload it to your server with the flash file or does it compile the flash file with the included info?

View 2 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved