ActionScript 1/2 :: Toggling Between Two Button Symbols
May 5, 2009
I am new to AS, but not new to programming.I'm using Flash CS4.I have two button symbols, PlayBTN and PauseBTN. They are used to control the playback of a slideshow. When I use either one or the other to control the slideshow, it works. However, what I want to do is toggle between the two buttons, so that they work together like this:
1. If the slideshow is playing, PauseBTN is visible. If PauseBTN is clicked, the slideshow stops, and PlayBTN becomes visible.
2. If the slideshow is paused, PlayBTN is visible. If PlayBTN is clicked, the slideshow stops, and PauseBTN becomes visible.
In other words, clicking the button not only controls the slideshow, but changes which button is visible.I had this working using a two-frame movie clip and static bitmaps, but when I swap out the bitmaps for the buttons, the button rollovers stop working.
I used this tut to create a menu. [URL] And my question is; Can I make the slider to move after a movie clip symbols instead of button symbols? That way my menu would be animated.
I have a button in action script with toggle="true". Now when I click the button its color changes and it looks as if it has been disabled (but its actually not). I need to know which property of this button has changed? For example if I need to know somewhere in my code the "toggled state" (if there is any such thing) of this button, which property of this button should I check?
I have created a Pause and Play button that toggles between states. It controls a Timeline with synced Sound. When I use it the sound and animation go out of sync. Can anyone help me with this or perhaps have better code I could swap out to make this work?
Below is what I am currently using:On the first frame of an Action Script layer put this AS:
Put the Pause and Play buttons directly over each other on 2 layers for the duration of the timeline.Pause Button on top. (unless you have a STOP on the first line then maybe the Play button will start it.
How do you deal with toggling multiple buttons? When one button clicks on the previous active button(s) turns off.
What is the standard practice for dealing with this? Have listeners on all the buttons checking if their name is in an activeButton variable (which seems process intensive with all those listeners going)
A FOR loop to go through all the buttons states and check the activeButton variable when any button is clicked?
That is two ways I have done it but I think there has to be other ways that might be more elegant.
This is a completely AS3 scripted, and dynamic project, meaning I cant use any assets from the library.
1 - This button is a mute. � Currently the loaded sound now fades in with a timer.� I want the button to over-ride any sound elements on the stage: the mp3 and later a flv movie as well.� In the below example the button only interferes with fade, and dosen't actually override it, after the fade - it dont do jack. � SoundMixer.stopAll(); will of course kill everything but I cant toggle this(can I?)
2 - The toggle button itself � I've loaded two png's into a sprite, and created a toggle button from them using an if statement. � Is this best practice? or would you recommend something else?� Perhaps SimpleButton?
ActionScript Code: var btmUpURL:String = "a_icn-1.png"; var btnDwnURL:String = "a_icn-0.png"; var btnLoader1:Loader = new Loader(); var btnLoader0:Loader = new Loader();
This is a completely AS3 scripted, and dynamic project, meaning I cant use any assets from the library.
1 - This button is a mute.
� Currently the loaded sound now fades in with a timer.� I want the button to over-ride any sound elements on the stage: the mp3 and later a flv movie as well.� In the below example the button only interferes with fade, and dosen't actually override it, after the fade - it dont do jack. � SoundMixer.stopAll(); will of course kill everything but I cant toggle this(can I?)
2 - The toggle button itself� I've loaded two png's into a sprite, and created a toggle button from them using an if statement. � Is this best practice? or would you recommend something else?� Perhaps SimpleButton?
I'm working through a book called Foundation Game Design with Flash, and I'm finding the Flash IDE confusing. I've been programming for several years, so working with AS3 directly is far easier than trying to understand symbols and nested symbols and the difference between graphics and movie clips and scoping issues and all that -- when tied into the IDE.
How many of you who are making games in AS3 also use the Flash IDE? Can anyone recommend a resource that is AS3 heavy and Flash IDE light? I don't care how much time I may or may not save by using things like the timeline, I just want to understand what I'm using.
I'm attempting to use CS4 (PC/Vista, if that matters) to create a SWF file that will basically act as a "library" of commonly used symbols. This SWF would be loaded at runtime by other SWFs, which could then use the symbols within it, including all art and code assets.
I have few button symbols designed in my flash movie. My flash movie is displayed in 9 regional languages and hence I have used TLF text for Flash Movie which easily displays Unicode text.SWF displays text properly when i publish it. but once i view the same SWF in Internet Explorer or any other browser it does not display text in those buttons.
I got some code to make a video loop indefinitely with the nsvid4_loop function, but i want it t be toggleable via a button I am trying to set up a function to do that (vid4loopwitch).. i'm getting stuck though on how exactly to incorporate the one nsvid4loop with its event listener into the function for repeating it is probably pretty straightforward i'm just still learning my way around AS. check the code to see what i have so far.. i just need to know what i need to add to the vid4loopswitch function to get it going. it is really hurtin my brain
var nsvid4:NetStream = new NetStream(nc); nsvid4.client = this; nsvid4.play("clips/video1.flv");
how to do it but i'm not sure how to implement. I basically have one button that when i click with need to trigger a function. When I click it again it will trigger a second function and will keep this up back and forth.
I've got several layers in the timeline and I'd like to know the most effecient method to toggle the visibility of any one of the layers when a user clicks a button I have on the form.
The layers are all simply graphics that have been imported and the only functino they have on the time line is that they each come in at different times during the playback of the movie. I'd like to have the ability to toggle the individual layer when a user clicks the button.
I'm working on a project that has multiple movie clips and I want to have three buttons, you press button1 and it displays mc1, then you press button2 and it displays mc2 and also hides mc1. same with others so if mc1 is on and you press button3 it will turn mc1 off and turn mc3 on. so any combination only turns on its respective mc.
how to do this without an extraneous amount of code. It will eventually have over 20 buttons, so I want to keep code clean if possible.
I have 4 buttons on the stage and each button is correlated to a seperate movieclip.
btn1 - mc1 btn2 - mc2 btn3 - mc3 btn4 - mc4
I want each mc to appear when it's corresponding btn is clicked but it has to be the only mc on the stage...meaning whatever mc was currently has to disappear. I've toyed with numerous was to get this to work but I know there's a more code efficient way to do this than the code I have below. And I don't want to use any timeline.
I have a question, but it needs a little backstory and explanation to make sense. I've searched a lot of places for an answer and have only come up short.I'm using Flash 8 and AS2.A few months ago I made a somewhat complex interactive doll.I came up with the idea to have the blouse have these massively poofy sleeves, and then have a jacket be tight fitting. So when I move the movieclip of the jacket over onto the blouse, the sleeves will disappear, kind of like real clothing, where you can bunch up fabric to fit.I did this by cutting the shirt into three separate movieclips and coding them to move together, so when the jacket moved onto the specified coordinates, and the shirt was established on the base, the sleeves movie clip would simply disappear.
Below is part of the action script connected to the jacket.[code]When you move the jacket away, the sleeves are still invisible. And if you have the shirt and jacket on, and you click on the underwear button to view the undergarment movieclips, the sleeves and sides are visible again, simply because that is the coding for the "drawer" buttons. Simply clicking on the jacket or the shirt creates the desired result, but it doesn't look very clean.I've tried using similar script to the above, to make the visibility true, but it's only served to make it visible all the time, even if the drawer buttons make it invisible.[code]
Is there a script I can use so the sleeves disappear once the jacket is on, but immediately after moving the jacket away, the sleeves reappear? And at this point, is there a way to keep the "undress" button from affecting this, but still keep the sleeves invisible when it reveals other garments and the shirt is on the doll?Should I be making the sleeveless shirt another frame inside the shirt movieclip, rather than a completely separate movieclip? And if so, I know how to go and stop to the next frame using a button, but not sure how to do it with a movieclip.So, I still couldn't get it to work with the shirt as 3 separate movieclips. Instead, I made it all one movieclip with different keyframes, each combination possible on its own frame. And when the jacket moves onto the shirt, it goes and stops to frame 2. When the jacket is not on the x coordinate, it goes and stops to frame 1 again.
I've landed a project which is centered around building a custom video player with some special functionality (so I can't just use the default Flash video player, unfortunately). I have two small 'problems' in the sense that I could probably solve them myself, but I'd like some input on best practice for solving them:(The project is for Flash Player 10 and the video is intended to run inside a browser.)
Toggling between normal / fullscreen playback Ok, so my custom video player needs to be able to toggle between fullscreen and normal embedded-in-webpage player size. How does fullscreen toggling currently work in AS3 -is there a specific AS3 method for fullscreening a specified video object in the swf (without stretching the video player UI in the swf itself), and if so, does it automatically black out the background if the screen format doesn't match the video format? - or do I need to download a class for this?
Positioning video player UI when going fullscreen As opposed to YouTube, I want the player UI to still show up when the video is toggled to fullscreen mode - but as mentioned above, I don't want to stretch its size along with the video. So is there a best practice for repositioning the video player UI to the vertical bottom and horizontal center of the screen when the user clicks full screen? I'm not entirely familiar with what happens to the Flash stage when it goes full screen,. How to deal with not knowing the coordinates of the vertical bottom/horizontal center when screens have different ratios and resolutions?
This code is written in simple ActionScript, but I'm assuming this problem of mine would occur in all languages that have boolean datatypes. I'm simply clicking the stage so that my boolean variable reverses its value and than traces/prints/logs it's new value. However, it's always tracing true instead of switching between true and false for each mouse click.
var myBool:Boolean; stage.addEventListener(MouseEvent.CLICK, mouseClickHandler); function mouseClickHandler(evt:MouseEvent):void { changeBoolean(myBool); } function changeBoolean(boolean:Boolean):void { boolean = !boolean; trace(boolean); }
I've landed a project which is centered around building a custom video player with some special functionality (so I can't just use the default Flash video player, unfortunately). I have two small 'problems' in the sense that I could probably solve them myself, but I'd like some input on best practice for solving them: (The project is for Flash Player 10 and the video is intended to run inside a browser.)
Problem 1: Toggling between normal / fullscreen playback Ok, so my custom video player needs to be able to toggle between fullscreen and normal embedded-in-webpage player size. How does fullscreen toggling currently work in AS3 -is there a specific AS3 method for fullscreening a specified video object in the swf (without stretching the video player UI overlay), and if so, does it automatically black out the background if the screen format doesn't match the video format? - or do I need to download a class for this?
Problem 2: Positioning video player UI when going fullscreen As opposed to YouTube, I want the player UI to still show up when the video is toggled to fullscreen mode - but as mentioned above, I don't want to stretch its size along with the video. So is there a best practice for repositioning the video player UI to the vertical bottom and horizontal center of the screen when the user clicks full screen? I'm not entirely familiar with what happens to the Flash stage when it goes full screen, How to deal with not knowing the coordinates of the vertical bottom/horizontal center when screens have different ratios and resolutions?
I'm trying to toggle 2 global Boolean variables inside of an ENTER FRAME loop. "Eating" and "WasEating". When these 2 objects hit each other "Eating" is set to true, and an animation plays to show that my character is eating. When the 2 objects DONT hit, I want to change my "WasEating" variable to true ONLY for that one frame (then setting it back to false), and to change back to the original animation when the Hero was NOT eating.
The issue I'm having is my variable is getting toggled true to false, false to true, every frame, not what I want. I want to have this happen ONLY ONCE, based on the hitTestObject function in the loop. For example:
ActionScript Code: addEventListener(Event.ENTER_FRAME, loop); function loop (e:Event):void {
I'm trying to create an image gallery by toggling between different sets of thumbnails and thus loading the appropriate images.I've set up the first 9 okay and they all load at first but when I toggle back and forth in the toggleThumbnails function using addChild I can no longer load these same movieclips.I'm loading the same movieclip with their associated instance names? How come it no longer interacts with the thumbnails?
ActionScript Code: import flash.events.MouseEvent; var thumbnailSet = "setOne";[code].....
I am using YouTube JS API to play videos on my site. Video is played on the dialog box. When user closes the dialog box, player is stopped - player.stopVideo(); But when user clicks again on video icon again, dialog box appears
In Chrome, the video starts playing at the previous position - OK Firefox, the video starts playing from the start irrespective of where user left it last time. - NOT OK
As per my requirements, I want the Chrome to behave as how firefox is behaving.
I have used states in my application.The thing is I have made the first item in my list to be selected. so I gave like this,
if(itemIndex == 0) this.currentState="selected";
this works fine.The problem is when other item is selected the first item does not change its state,it remains in the selected state until its clicked.My code looks like this,
Extremely simple timeline. Simply want to fade one image to another.Created a keyframeadded a bitmap, converted it to a symbol, set the alpha of 1st frame to 100%, 2nd frame to 0% & tweened.Image fades to white -perfect.Create a new keyframe, set the alpha to 100%, try to swap the symbol to another bitmap I'd converted to a symbol.Doesn't work.Inspector always says "instance of symbol 1". Cannot use any other symbols except for this one?
I know nothing about Flash Professional, but a friend has given me a .swf that supposedly contains some graphics that he wants imported into a Flex program - which I know a fair bit about.I have the .swf, but I have no idea what to put for "symbol". My friend doesn't seem to know what I'm talking about. How can I determine the symbol name to put in the 2nd parameter of the embed?[Embed(source='SomeSwf.swf', symbol='WhatGoesHere??')]Is there some way to browse the .swf, or some way to just import the whole thing and step through the symbols in actionscript?
I have multiple instances of the same symbol on different keyframes on the same layer on the timeline.Is there a way to swap all of them at once, or do I have to click on each one individually and swap them one at a time?
All my symbols disappeared. they're still there, and when i click into them to edit, i see everything, and also when i publish the movie i see everything. the layers are not invisible, and there are no masks. this happens to every symbol. i quit, closed, restarted, same thing. now it's happening with everything i open in flash.
