I have a tween animation using the tween class and I want to attach an MC when the tween has finished. I Know how to attach a movie clip and everything I just need to know how to fire it at the end of the animation. I know I could always do this with a time line but I would prefer to keep it all code.
View 2 RepliesHow to stop the next tween action to start until the previous tween completes playing in as3.0?and also i want to stop the tween to happen on the same object twice.Basically i have a container (movie-clip) in which there are n number of movie-clips (arranged as bricks). When i click on the container the target (brick) will disappear (made scaleX and alpha to 'o'). also i am tracking how many bricks are closed.But the problem is if i do a fast double click the tween seems to happen twice. and the count also seems to increase for the same brick.
View 3 RepliesWhen I click my button I wish one of mc's disapear completely(first alpha changes from 1 to 0) then removeChild.
import fl.transitions.Tween;
import fl.transitions.easing.*;
import fl.transitions.TweenEvent;[code].....
I dicided to use events but it doesnt work,
I have a mc that I want to trigger a few tweens when rolled over but I want two of them to only trigger when another has finished...
Code: Select allmain_inner_mc.addEventListener (MouseEvent.ROLL_OVER, mainRollOver);
function mainRollOver(MouseEvent):void
{
TweenLite.to(main_inner_mc, 2, {scaleX:2.5, scaleY:2.5, ease:Elastic.easeOut});
TweenLite.to(main_inner_mc.mainheader_mc, 0.5, {alpha: 0, y:100, scaleX: 0.25,
[Code].....
I have this bit of actionscript that tweens a movie in position and scale. It then attaches a movie from the library.
Code:
_root.info._alpha = 100;
_root.info.slideTo(20, 100);
_root.info.window.tween(["_xscale"],[140],1);
[Code]....
Whats the best way of waiting until the tween is complete before attaching this movie. Basically I want the attached movie to appear once info._x == 20.
What I was looking for is a way to check if a tween has finished for BOTH clips. I thought I could try it like this:
Code:
;
import mx.transitions.Tween;
import mx.transitions.easing.*;
var xScaleT:Tween = new Tween(kText, "_rotation", Elastic.easeOut, 0, 360, 3, true);
[code]....
But I noticed that first the ending of xScaleT is triggerd after 3 secs. and after that the ending of XPosT 9 secs. later. What I want is for this.yoyo() to occur if BOTH xScaleT and XPosT have finished. There isn't something like 'onMotionFinishedAll' ?
I have got a button that is disabled and an alpha Tween that last for 300 frames, how do I enable the button when the Tween has finished?
View 4 RepliesI have a tween on this mc and after its finished its supposed to play "goal", a label inside it (code is on the main timeline and the label inside the mc). But, well, i dont know why but it doesnt.. Heres the code:
Code:
stop();
import com.greensock.*;
[code].........
I have a small problem, how it's possible to delete a tween effect after he has finished the tween?I use tween class, this is the code, and i want in frame 41 to delete the tween.
Code:
btn_sector1.holder.loadMovie ("sector1.jpg");
btn_sector1.buttontext.theText.text = "S E C T O R 1";
[code].....
I would like to go to a certain frame in my timeline after the last tween has finished! I know it most likely will have a "onComplete".
HTML Code:
import gs.TweenMax;
//what elsee?? =[
With the script below I am making a ball move from left to right and back. but when I rollover twice quickly, it also accepts the second rollover command. I would like it to accept that second rollover only when the first one is finished. I mean, I want the first to be finished before it accepts another rollover. I know it is simple to solve this with a tween using frames instead of as, but I was wondering if someone knows how to adapt the script.
[Code]...
edit2: Well I found out what was wrong. answered my own question. * Face-palm* sorry for this waste of space. (if you come across this randomly, my solution is answered at the bottom)Edit: While mulling over my code trying to find a solution, I noticed that when my .swf freezes as it is tweening out, an animated movie clip that is on the stage also freezes mid-animation. which brings me to believe that my problems may stem from the loading/creating image portion of my code. as a result, here is my loading function to supplement the code below:
function loadImage():void {
//if it's not already been loaded)
if ((currentImageNbr+1) > imagesLoaded || images.length == 0) {
[code].....
im building a class file that tweens an empty movie clip, containiing an attached mc, using the tween class. How can i make the script wait for the tween to finnish before executing the next function?
View 1 RepliesI have asked before but that was a week ago and ive changed alot of code. I am still having the same issue of trying to ignore MOUSE_MOVE while a tween plays and then reactivate MOUSE_MOVE on Finish. I have tried timers aswell to anticipate the finish with no luck as if i move some code a error #1009 happens.
I have alos tried motion_finished, if statements and even values with no luck as the code will just not function unless left as below.[code]...
I am trying to use the Tween class to first rotate an object and then after the rotation is finished, use a new tween to move the object off the screen. Here is my code:
[Code]...
The trace runs, just as expected, right after the first Tween completes. But the second Tween doesn't work. What am I doing wrong?
I'm having some difficulties on checking when an animation in a movieclip is finished. It's not a tween, otherwise I could make a tween handler with the "onMotionFinished"-property. My situation is different.My movieclip has 60 frames with each frame containing a 3D image. These 60 frames make the impression that a die is rotated in 3D.How do I check in the actions of my scene (root) when the animation is finished?
I already tried making an interval that constantly polls if a variable "finished" is set to true (which the movieclip sets to true on its last frame).This solution isn't really accurate enough due to the interval number.Setting the interval to 1 millisecond won't do any good either.Is there a listener object or something else that makes this possible?On my last frame of the movieclip is a stop() statement which might be polled by a listener?
created the gallery and made thumbnails vertical everything works fine except my tween for the thumbnails. i need help disabling the hit_up and hit_down buttons for the amount of time the tween is going on so someone can't click on the button till the tween is finished.
[Code]...
why this isn't working?
Code:
changeWidth (quiz_holder, _width + 200, mx.transitions.easing.Strong.easeInOut);
function changeWidth(movName, moveTo, moveType){[code].....
What I want to happen is that the quiz_holder box expands sideways, then when this is finished, it expands lengthways. At the moment it's just getting to the point where it's expanded sideways and then stops?
I have a movie clip (mc) with the alpha set to 0 (invisible). if you click on the stage it sets the mc's alpha to 0.4, before fading to alpha 0 again in 1.5 seconds. Here the code:
Code:
mc.alpha = 0.4;
tweenOut = new Tween(mc, "alpha", Regular.easeIn, mc.alpha, 0, 1.5, true );
Basically you click on the stage, the mc appears and then fades away within 1.5 seconds. Here's my problem...
If I click on the stage again before the fade has completed, nothing happens. I have to wait the full 1.5 seconds before I can do it again.
Anyone know how I can make this work irrespective if the previous fade out has finished or not?
how to eliminate previos attach before move to next attach MC..let say as u can see in my code..I just settign the interval..for 2 second..in other to attach the mc on eby one...so how to set up the code so that if the 2nd mc has attach it'll remove the 1st one attach for certain time...and so on..the scenario like this..
mc1 attach
after 2 second
mc2 attach --> remove mc1
after 2 second
[code]....
import fl.transitions.Tween;
import fl.transitions.easing.*;
var homemanTween:Tween = new Tween(homeman_mc, "x", Elastic.easeOut, 1000, 50, 3, true);//frist tween
var adobeTween:Tween = new Tween(adobe_mc, "alpha", Regular.easeOut, 0, 1, 3, true);//second tween
how can I animate the 2nd tween after 3 seconds when 1st tween stops.
i'm trying to figure out how to reset or refresh clips that are dynamically attached to another clip based on records returned through xml.asically if the user chooses a different filter for the database query I need to be able to refresh a scrolling list made up of clips which will be different based on the filter.this is what I have for a function. I try to use "attachEmptyMovieClip" but to no avail
Code:
getAll=function(){
members = getMembers.firstChild.childNodes;
[code].....
Now I am using the Tween Class to move some boxes in my movie, now I can move the first mc and then another mc after the first tween has finished with onMotionFinished but I was hoping someone could help with how do I start the second tween when the first mc has passed a certain _x coordinate. ie starting the second mc moving while the first tween is still moving.
View 1 Repliesi am wondering if there is a way to put a delay (seconds) on the flashs' native tween class like you can on the laco tween engine... such as
[Code]...
If i have a clip with a bunch of stuff inside it (on layers) like other clips, bitmaps, etc. and perform a tween on that clip (via tween class), the stuff inside the clip seems to alpha at different rates.
For instance, i have a clip with an empty movieclip which loads a bitmap image and on top of the bitmap image, i have a gradient feathered edge (.png) bitmap and on top of that I have some dynamic text (embedded fonts).
The bitmap is supposed to create a feathered edge on the photo but since they alpha at different rates, you always see the hard edge of the photo...
is there a solution like cacheAsBitmap which would let the whole clip alpha at once? If it's cacheAsBitmap, i must be using it incorrectly, b/c it's not working!
I will have three seperate pages for the motion tween, mask effect and shape tween... would you make the seperately, in a different scene, as a symbol or on the same scene with the website.
View 2 Repliesmy movieclip button was working perfectly as a motion tween. Can you use shape tweens as movie clip buttons? I just made that change, and kept my code:
[Code]....
I am facing a problem in one of my animation with flash CS4 - I have nested a Shape Tween in a Motion tween to get more control over the easers and effects, unfortunately I am not able to view on the timeline of my Motion Tween the action of the Shape tween nested inside.
It only show the first shape of the Shape Tween during the entire Motion Tween and that is really a problem for me because I need to see the final frame result of that Shape tween to be able to position it in a precise way on my scene according to other instances.
[Code]..
Am trying to use the Tween class to scale and move a movieclip. Now the movieclip is within the loader, so I need the motion to be controlled by the percentage loaded. Now the code to move the movieclip to its final position is:
var xscaletween:Tween = new Tween(mstone, "_xscale", Regular.easeOut, mstone._xscale, 220, 6, true);
But this is the final location, I want to be able to change the properties of xscaletween, yscaletween, xmovetween and ymovetween as per percentage loaded.As in, within this final boundary limit of the tween, I want, for example, xscaletween, to scale only till 140 till percentage hits 50. Is this possible?? If not is there a workaround?Or do I have to use new tweens within each percentage limit?
I am working on to slide a movieclip across the stage.The movie clip is five times the width of the stage and I am using the Tween Class to move it across the stage when a button is pressed.The interaction I want is that when the button is pressed the movie clip moves a certain amount.If the button is pressed again it moves further.The script I have come up with though is taking the movieclip back to the original position of the movieclip and then moving it as opposed to moving it from the position it reached after the first button click.I have tried a few things but nothing is working.The script I am using at present is:[code]
View 5 Replies