I have a big tedious project which requires to change all library symbol linkage URL�s (into the same name). Instead of copying/pasting,is there a way to do this at once (using a JSFL perhaps?)
View 2 RepliesFlex complains if I want to create an object from a library symbol with linkage: 1180: Call to a possibly undefined method [linkage name]. So to avoid this, I create a class for that symbol, in this case extending BitmapData using Flex's new ActionScript Class feature. Flex create that class for me and the constructor looks like this: public function CustomBitmapData(width:int, height:int, transparent:Boolean=true, fillColor:uint=null)
[Code]...
I have a button symbol in the library that has a linkage. When I run my movie, everything works fine. If I go into the properties of that button turn off linkage, then immediately turn it back on with the same settings, then run the movie. I get;
1046: Type was not found or was not a compile-time constant: Phase02_btn.
1180: Call to a possibly undefined method Phase02_btn.
Library symbol "Card" is linked to class "Card" which extends "MovieClip". Library symbol "Card" contains a card background image.Library symbol "Ace" is linked to class "Ace", which extends class "Card". Library symbol "Ace" contains a TextField with a big letter "A".So we have Ace extends Card which extends MovieClip. Ace therefore extends MovieClip, but does not DIRECTLY extend MovieClip.When I drop an instance of Ace on the stage and compile the clip, all that shows up is the big letter A. However, I expected the background image from Card to be included, since Ace extends Card, and the Card symbol contains the background.It seems like Flash ignores symbol content unless it belongs to the top-level class being instantiated.I think it's LAME that one symbol can't extend another. The IDE could easily draw Card as a non-editable background while I'm editing Ace which extends it, and it should instantiate Card's content and then Ace's content when an Ace is instantiated.
View 3 Replieswhat i want to do is, when certain button is clicked, replace a certain symbol(button) by another symbol(movieclip) stored in the library. i try things like loadmovie("","") to replace the symbol from a external jpg, but some how it does not align even both images are exact dimension. can i replace an image straight from the library?
View 1 RepliesI have a fla with nested swf's. My question is, can I update a swf in the fla library if I have changed it within its own source fla and re exported to the same swf file name. ( as can be done with graphics in Indesign )
View 3 Repliescurrently this is the problem i'm having.i'm exporting a symbol - song1 - from my library to AS ("export for actionscript") and then using it to dynamically create some movieclips (hereafter referred to as MC's) on the stage. each MC contains a text field that is filled by an value in an array....
Code:
function xmlLoaded(event:Event):void {
songList_XML = new XML(xmlLoader.data);
var songNodes:XMLList = songList_XML.song.title
var songTime:XMLList = songList_XML.song.time
[code]....
Now all this works without a hitch - all the trace statements produce what they are supposed to and the MC's appear on the stage where they are supposed to and with the proper text (song name song time).
BUT - here's what i don't understand - *how do i REFER to the INSTANCES of each clip*?because they are created dynamically they don't have instance names and there is no way to assign them instance names via AS (right?).i tried to use the Display List to access them by assigning each one a name (last line - commented out) and then using the getChildByName() method - for ex. getChildByName("nameSong1"). but that didn't work either... i have a few other ideas but they all seem ridiculously complicated - i believe there's GOT to be a *simple* solution for this but i've checked all the references i have (O'Reilly, AS Bible, and others) and found almost nothing. just the display list trick above which didn't work.
Is there anyway in ActionScript 3.0 to assign instance names to movieclips in the library without assigning linkage id? I said that because I have over 1000 movieclips in the library that I need to be able to manipulate at runtime. I hope I don't have to Right Click -> Linkage... a thousand times to assign the linkage IDs. How can I reference to the library movieclips without having to name 1000 times?
View 7 RepliesI have just started my first project using AS3.0 and Flash 9 this week.I feel like I know AS3.0 from my flex experience very well, but it is downscaled for Flash 9. Anyway I have looked for this issue in the forums and maybe I am just missing something.I have a class we'll call MyClass which extends Sprite. I have several methods in there that update things like rotation and position based on events it is listening for via the model. I even have a trace statement in the constructor for testing.
Now maybe this is just stupidly obvious but when ever I set a library element to link with the class (i.e. linkage = MyClass), all my script fails to work. If I remove that linkage and work from a purely data perspective it works as expected.I have the project settings to Flash 9 and AS3.0 so that shouldn't be an issue.
So I have 20 buttons on a page..and i want it so that a certain button when i click it.. it starts a sound and cuts off all the other ones that may have been playing...this is my code...
on (press) {
stopAllSounds();
}[code].......
..but it doesn't workwhat am i doing wrong?I made sure to enable action script in the linkage library too
right now i have some items in my library that use a base class using the linkage menu item by right clicking on the item in the library.
i want to dynamically populate the movie clips instead of them being already in the library. I know how to create/populate the movieclips by using the loader class, but i am not sure how i assign the base class to each movieclip i create in my .as file
When im attaching the enemy on stage.this is not attaching.. Ihave the linkage name "enemy " in the libary. [code]...
View 3 RepliesI am starting to create classes instead of using the timeline and I am learning a lot more even if mistakes happen more often. However I have a question about linkage & library. For example let say that I have a ball pic called Ball1.mpg. I copy and past that Ball1.mpg in my folder where the Fla file is as well as the as file. If I want to utilize this Ball1.mpg in my code using Flash do I absolutely need to import into my library and link it and export using linkage? Or can I use the object Ball.1mpg just using actionscript. Of course that implies that I would use an actionscript class not the timeline.
View 1 Repliesi know flash has problems with preloading files that use linkage... i know it has something to do with 'export in first frame'. because when you have that checked you can preload it because its on the same frame as the preloader... but if i dont have it checked it isnt exported and when i click a button i cant hear anything... how to work around this? how must i preload / link my embedded sound files?
View 1 RepliesSummary: I don't quite understand how the import/export URLs for symbols in a runtime library work. I can't figure out how I can set them so that the runtime library will be properly loaded and accessible for other swfs to import from, if I want it to work both in a local environment (on my harddrive), and from a remote environment (on a web page).
Relative URLs seem to work great for the hard-drive case, but fail for the web page. Is there a magic way to set the relative URL to work from the web too? And/or, is there some way of manually loading up the RSL at runtime and making the importing swfs import from that loaded copy, rather than having Flash doing it behind the scenes based on the import URL set in the symbol? Following is a longish description of what I'm trying to do, and why... I'm trying to figure out if we can use RSLs to contain common UI controls for our next project. I'm running into an organizational issue that I can't quite figure out - how to get the RSLs to work in both a local development/debugging environment, and on a production web environment, with the same exporting/importing URLs.
Here's what my setup would look like. Say I have a main application main.swf, an RSL lib.swf, and a UI module dialog.swf. Main.swf loads or embeds dialog.swf. lib.swf exports some symbols that dialog.swf imports. On a local development environment, these swfs are found in folders like so:
[Code]...
If one uses [Embed] to refer to external graphic assets its easy to instantiate and use them.However, I've got a png in an Fla, with the Class identifier set to "Symbols", Base class is BitmapData.I need to instantiate it like this:
var symbols:BitmapData = new Symbols(1, 1);
addChild(new Bitmap(symbols));
Of course the compiler complains about a call to a possibly undefined method Symbols.For a temporary fix I guess i'll put the graphic external to the swf, but for this project it needs to be in the library along with everything else.
I have a movie clip that holds one bitmap image, some simple AS3 to change the image displayed, and a ton of bitmaps I've imported into my library.Currently, I swap the images by changing the bitmapData
holder.bitmapData = new test2(1,1);
but this requires me to check off 'Export for ActionScript' in every symbol. I'd rather not go through every bitmap in the library and do this, is there some way to reference them by their library name?
How do I reference a library movieclip in a class? I couldn't get it to work entering the name of the class in the linkage properties (as2 class name text field). The variable was undefined. I know I'm missing something....what is it?
View 4 RepliesI have a project in Flash Professional CS5 and ActionScript 3.
I have a movieclip symbol (referred herein as "background" with scripts on various keyframes inside of that symbol. I need to hide or show another symbol (referred herein as "object") sharing a stage with "background".
To put it another way, I need "object" to be hidden when "background" reaches a certain internal keyframe. However, as "object" and "background" are both children of the same stage, how do I do this?
I'm trying to figure out if we can use RSLs to contain common UI controls for our next project. I'm running into an organizational issue that I can't quite figure out - how to get the RSLs to work in both a local development/debugging environment, and on a production web environment, with the same exporting/importing URLs.
Here's what my setup would look like. Say I have a main application main.swf, an RSL lib.swf, and a UI module dialog.swf.
Main.swf loads or embeds dialog.swf. lib.swf exports some symbols that dialog.swf imports.
On a local development environment, these swfs are found in folders like so:
[URL]
Here is the problem. If I set the export/import url for symbols in lib.swf to "assets/lib/lib.swf" (relative to the location of main.swf), the runtime library gets loaded fine in the local environment. But in the web environment, it does not load - the player just shows the "..." graphic indicating it is trying to load.
Alternatively, I can use "http:/myapp.com/assets/lib/lib.swf" as the export/import url. Now, it will work in the web environment. However, in the local environment, dialog.swf will load symbols from the lib.swf that is out on the web, not the one that is local. But I need it to load from the local version, so that designers can muck about with the assets and see the results locally before publishing to the web.
Is there some alternative way to set up the swf's, or way to set the URLs, or some other hoop I can jump through that will make the RSL load properly in either environment without having to manually change URLs all the time?
(Details: I am using Flash Builder 4, CS 5, Action Script 3, Flash Player 10... No Flex! My example omits some details from my actual setup, such as the fact that we are using a preloader to load the main application, and a php script on the web page to start the preloader.)
Does anyone know a as3 code to link button to a movieclip using the linkage option from the library?
View 0 RepliesI have a symbol named picHolder. In symbol properties under linkage, I chose "Export for ActionScript" and "Export in frame 1" and gave it a class name of picHolder.Normally, to instantiate a new instance, I'd say:
Code:
var tempPic:picHolder = new picHolder();
and I'd go about my way.
[code].....
**Warning** The linkage identifier 'ComboBox' was already assigned to the symbol 'ComboBox', and cannot be assigned to the symbol 'GUI MC/Combo Boxes/abc', since linkage identifiers must be unique.**Warning** The linkage identifier 'ComboBox' was already assigned to the symbol 'ComboBox', and cannot be assigned to the symbol 'GUI MC/Combo Boxes/def', since linkage identifiers must be unique.
Both of my ComboBoxes has the same identifier.I could not change the identifier through the properties tab because it is greyed out.
I was trying to change the linkage of an object from a .fla already created and with some linkages. Here are the steps to reproduce:
1. Create a new ActionScript 3.0 .fla file
2. Create a 2 Symbols (as MovieClip), name it and put some linkage.
3. Save & Close the file.
4. Open the saved file.
5. Try to change the linkage (by elimination or rename) --> YOU CAN'T!
This is a disgusting error, I can't work with these.
I have a swf file named "intro.swf" and i have loaded another swf file with this path "En/main.swf" into it. And the file "main.swf" should load many xml and other files from its directory "En" , but when "main.swf" loads in "Into.swf" it can not load any of those xml and other files ,because the related urls of them begines from "Intro.swf" location. can i use any command in "main.swf" to change the base of all paths in this movie to upper diectory ? (for example i want to convert the path of "config.xml" to "En/config.xml" automatically).
View 0 RepliesI have attached a video on a frame of my website in Flash. When I preview the movie the film plays as it should.But when I export the Fla. as a Swf. file it then doesn't have the movie there anymore?It does show this error:
**Warning** The linkage identifier 'FLVPlayback' was already assigned to the symbol 'Video/FLVPlayback', and cannot be assigned to the symbol 'FLVPlayback', since linkage identifiers must be unique.
I really don't know what that refers too.
how to go about implementing the link between an "fla symbol" and a class "as" file with AS2.0? i am aware on how to do it by utilizing the linkage property under the library feature or "right click" the perticular item on the stage, but i would want to do it solely with AS2.0.
View 12 RepliesI'm trying to create a linkage to swap movie clip dynamically. I already create a linkage and after my movie clip symbol actuall say Export: contact_idea. But when I try to attachMovie("contact_idea"). It does nothing. Is there anyway that I can test that the linkage is actuall linked?
View 2 RepliesI duplicated a "Contact" button, movie clip symbol.Trying to edit the text "contact" in the new button but the text tied to the old button keeps getting changed.I duplicated the text symbol that is tied to original "Contact" button.Tried changing the new button again but the link to the old button is the one being changed.I can't seem to find where to unlink the text symbol attached to the original button and then add the new text symbols the duplicated button.
View 1 RepliesI have 2 SWF, one of them (let's call it Resources.swf), that contains several symbols (most of them MovieClips) on its library, but, none of them are added into the stage ( the timeline contains only one empty frame),and then, the other swf (Main.swf), where I need to import some of the symbols from the other SWF.I have been looking around, and searching, but all the info that I saw, and tried, imports the symbols from the stage/timeline using things like:[code]If not,do I have modify my Resources.swf to work this out or do I have other alternatives?
View 3 Replies