Is there a way to detect when the user accepts the Privacy Pop-up?
Basically, I'm using the microphone to record a voice message. I'd like to start a countdown timer that tells the user how much time they have to record their voice.
I start the countdown timer on the same event that I call nsPublish.attachAudio(microphone), and the countdown starts immediately, even though the user sees the privacy pop-up.
Is it possible to detect the IP number via flash, java, php, whatever, and send the information to flash?
View 2 RepliesIs it possible to detect the IP number via flash, java, php, whatever, and send the information to flash?
View 2 RepliesMuch to my chagrin, my FLVPlayback video enters the 'pause' state rather than 'buffered' when the bandwidth forces the player to pause. Unfortunately, that's the same state as when a user presses the skin's pause button. Therefore, I can't detect whether the video is paused based on a user action versus a lack of downloaded video data.
That is, I can trigger an event based on either occurance, but I can't tell which caused the video to enter the paused state.
It sounds like others have had this problem as I've caught a couple discussions outside these forums describing how to code around this problem and, well, the descriptions are too sparce for me to code myself.
How can I tell when a user has been idle for say 5 minutes on my Flex app? When I say "idle" I mean the user has not interacted with the application at all.
View 5 RepliesI am having a problem with correctly detecting a user's camera settings.
If the user has selected "allow" and "remember", then the camera.muted setting is false (not muted)
However, if the user has selected "deny" and "remember", then the camera.muted setting is true. (camera has been muted by the user)
BUT, if the user hasn't selected anything and the "remember" checkbox is unchecked, the camera.muted setting is ALSO TRUE (the camera is again muted, but it's only because someone hasn't "allowed" the camera yet)
Is there a way to differentiate between when a user has chosen to deny a camera forever for a particular site (by checking the "remember" check box) OR when they just haven't allowed the camera in the first place?
Is it possible, using Flash, to detect whether or not a user is using Cable, DSL, 56k, etc.?
View 1 RepliesI'm working on a project for a client, they want a simple drawing api which requests the user to draw a circle, or a shape on screen. The circle is then analyzed and a Score/Percentage of correction is returned. The drawing I have covered, how to assess the drawn circle against a perfect circle?
My first idea was to put invisible trigger points around the circumference of the shape and check for hit tests when the user is drawing. Another would be to track the dimensions of the left, right, top and bottom most bounding box and then find the radius, or something to that effect.
I am building a stand alone flash file which needs to detect whether the user has an internet connection on the release of a button.
View 3 RepliesIs it possible to detect, through flash, browser version on a user�s computer?
View 1 RepliesJust curious to know if its possible. I have a nav that is in flash and will be in many .asp pages. Could a corresponding button in the nav stay highlighted to represent where a user is by detecting what page it is on?
View 5 RepliesI am trying to have a local shared object in flash to detect whether a user is a new user or a returning user. If they are a new user I want to do newUser function and if they are a previous user I want to do a previousUser function. This should all be happening on an onEnterFrame.
Here is my code I have so far:
//shared object - cookie
newUser_test = SharedObject.getLocal("newUser");
newUser.text = newUser_test.data.title = "new user";
newUser.text.onEnterFrame = function () {
newUser.text = "new user";
} newUser.text.onEnterFrame = function(){
newUser.text = newUser_test.data.title = "previous user";
newUser_test.flush();
}
In my flex app I have custom tooltips on buttons that hide and show based on user context. The problem that I dealing with is that when I call my showTips() function I only want to show tooltips on the buttons that visible in the view. So buttons that on a un-selected tab (tabNavigator) should not show the tooltips. For some reason all tooltips are showing. Is there a way to detect if a button is not in current view, like on a un-selected tab?
View 2 RepliesNeed a code that only accepts numbers. Upon inputting, the code must check if it is number, if not, it must remove the entered key or not enter it at all
View 6 RepliesIs it possible to make a dynamic class in AS3 only accept dynamically created properties if they're a given type?For example, I may only want Sprites to be allowed. So take this quick example class:
public dynamic class Test extends Object{}
And a few quick lines to get an idea of what I mean:
var test:Test = new Test();
test.something = 32; // error
test.something = "party hats"; // error
test.something = new Sprte(); // works
Maybe using the proxy class/namespsace there's a way to manipulate whatever is run when creating variables dynamically?
I've tryed to make a textField only accept Numbers. I've embeded only numbers between 0-9 but I can still add letters.
View 6 RepliesAt the end of the movie I would like to check if the user is still connected to the Internet (they maybe on an unstable dial-up connection and lost connection). Is there anyway to do that? I mean, is there a way to check if a user is connected to the Internet using ActionScript?
View 4 RepliesTrying to detect a browser close event and send some data to the database when the user closes the browser window...but can't seem to get it to work.[code]
View 6 Repliesi want to write a function that is used by multiple buttons and accepts a variable when it is called by a given listener..
ActionScript Code: this.fileBTN.addEventListener(MouseEvent.MOUSE_OVER, menuSet("fileMenu"));
function menuSet(what:String){
trace(what);//should trace back "fileMenu"
}
Adobe is, in my opinion, intentionally deceptive on a number of levels about the privacy-invading cookies that Flash stores on your machine. These are NOT the cookies that get deleted when you clear your browser cache. These cookies remain on your machine until you MANUALLY DELETE THEM. And Adobe know that most users are not technically proficient enough to even find where they exist.There is a good site that describes how to get rid of them here: [URL]
[Code]...
IShockwaveFlash and cointerfaces have not any way to
1) programmicaly allow use camera and remember choice
2) disable context menu?
We are working on flash camera project. We want to ask user to allow or deny camera access first on page load. then after few seconds we want to start camera and take photo. If User deny camera (or flash) access, we do not want to start camera. and If user allows permission for camera (or flash) access, we want to start camera and take photo.For this, We are using "Security.showSettings(SecurityPanel.PRIVACY);". This code is user for ask permission to user about their camera access.So, it is show Privacy Pop up in flash. But, how we can have control on that pop up
View 1 RepliesPossible Duplicate:How to get control on security privacy pop up in flash an we have any control over security privacy pop up in flash. I mean that I want to call function when user click on done button of privacy pop up.We are using "Security.showSettings(SecurityPanel.PRIVACY);". This code is user for ask permission to user about their camera access.
View 1 RepliesThis is not an issue with action scripts it's regarding the privacy and secureness in a flash based website. WIll it cause any harm by giving someone the websites' FLA (just for checking purpose)? Can that person do any harm to the web in future? If yes, what are the possibilities? (online transactions, database info, virus, etc...)
View 6 Replieshow to check that user has allowed or denied webcam access in privacy settings dialog box to the site?
View 4 RepliesMy web-app records users via webcam and microphone. I want to use HTML/JS for the controls and content, so I created two separate Flex modules: * A "Webcam Setup" module that lets you choose your camera and mic input devices * A "record" module that lets the user record and submit the recording
When I embed either of these on the page, since they access the user's Camera/Mic object, Flash shows the Privacy dialog that says "[mysite] is requesting access to your camera and microphone. If you click Allow, you may be recorded."
The problem is, if I answer Yes in the Setup module, and later add the Record module to the page using Javascript, it again shows the Privacy dialog.
Is there a way to avoid the second privacy popup?
I would think that saying "Yes" for [mysite] would store that permission for at least that session, but apparently not.
What I've tried I tried combining them into one SWF, adding it to the page once and moving the DOM element with jQuery's append() function when needed. When I move it, however, it reloads and asks me again.
I have developed flash audio and video chat application, every thing is working fine with all browser with in XP(os), but I have problem in Mac(os), i.e., I cannot able to click on Website Privacy Settings panel allow button in Mac 10.5.8, cursor is pointing on allow button, when am clicking on it nothing is happening, and there is no probelm in XP, I can able to click on Allow button. How do I stop or disable appearing Website Privacy Settings panel before webcam starts. I went through with [URL], here its allowing without appear website privacy setting panel for only one user that also for that particular PC only,i wanted to get allow for all online web users by default allow with out appearing website privacy seetings panel.
View 4 RepliesIs there a way to detect the privacy dialog box for allowing/denying microphone access has been selected/closed (so sound recording can be started)?
View 1 RepliesI am trying to get the Privacy Settings Tab to show in our flash/flex4 video chat application we are building.I have 2 systems with latest Flash installed (currently 11.1.102.62). However, the player always shows this (privacy popup question) instead of this (privacy settings tab) when loading the app.The reason i want the settings tab to show is because i need the end user to easily check the "remember" box. I have tried to call Security.showSettings(SecurityPanel.PRIVACY); before as well as after the getCamera/getMicrophone calls but all that happens is we get 2 popups instead of 1.and still no "remember" option.Actually it doesnt show the privacy tab at all!Searched tons of forums but have come up empty.I have also searched the adobe docs but all I find is a paragraph stating"if your computer or device doesn't support audio or video recording using Flash Player, you don't need to allow or deny access, and this panel doesn't appear".Which is hardly true since one of the systems we are testing with is a new Macbook Air running latest OSX.Does anyone have any insight into why this might be happening and how to display the "Privacy Settings" and not the "Privacy pop-up question"?
View 1 RepliesI am making a ball move from left to right and back. but when I rollover twice quickly, it also accepts the second rollover command. I would like it to accept that second rollover only when the first one is finished. I mean, I want the first to be finished before it accepts another rollover.I know it is simple to solve this with a tween using frames instead of as, but I was wondering if someone knows how to adapt the script.
on(rollOver){
ballTween = new mx.transitions.Tween(balMC, "_x", mx.transitions.easing.Regular.easeOut,balMC._x, 44, .5, true);
ballTween.onMotionFinished = function() {
ballTweenterug = new mx.transitions.Tween(balMC, "_x", mx.transitions.easing.Regular.easeOut, 44,11.9, .5, true);