ActionScript 2.0 :: Drag And Dropping Duplicated Movies?
May 17, 2007
Is there any way of Duplicating a movie and then calling upon it to drag and drop it else where? I can't seem to get it working since the script for drag and drop calls upon an instance name - and the instance name for the duplicated movie has a variable at the end so its different all the timeeg duplicateMovieclip("movieclip", "instance name"+i, i)I don't even know if its possible calling upon an instance name that doesn't exist until something is clicked O.o;
View 1 Replies
Similar Posts:
Feb 28, 2012
I'm doing this drag and drop animation where object 1 is dragged to object 2. When object 1 is dropped onto object 2, I need more than one image of object 1 to appear. I've used this simple code for drag and drop:
on(press) {
startDrag(this,false);
}
on(release) {
stopDrag();
}
View 3 Replies
May 2, 2005
my drag and drop target works...sort of. Here's the problem, when the target is dropped it should tell the user if it is correct. It does but you have ot keep drag and dropping all over the target to finally get the answer to display. I have checked the registation marks and stage alignment...nothing seems to work. it should be if you drop it over the hit (instance name) it should immediately display the answer of "correct" Here is the code for the drop target:
[Code]...
View 1 Replies
May 15, 2009
I'm new in actionscript and i need a horizontal scroller with duplicated movies. The scroller works fine (isn't in the code below) but i can't see the duplicated movies or anything for that matter.
[Code]...
View 4 Replies
Dec 23, 2006
I'm making a snowglobe for the holidays and as such, I'm looking to have it snow INSIDE the globe only. What I've done is make a mask for the globe so that the "snow" movie clip will only be visible within the globe. I also have a duplicate movie action in my main movie to create a lot of snow.
The problem, though, is that the duplicates do not get masked like the main snow clip. Is there a way to fix this?
[Code]...
View 5 Replies
Oct 29, 2010
i'm new to flash AS3. I am trying to create an drag drop activity where the user can match words and meanings by dropping and dragging into the right space. At the moment I want to create multiple drop areas for the boxes. At the moment they will only fall within their own target area - also only the boxes move and not the text. How do i create mutiple drop areas for the words and meanings?
[Code]....
View 1 Replies
Nov 24, 2004
why this code dosent work at the same time in the timeline, and why only envent put inside the attacHMovies or duplicated Movies work, if i put them in the forr loops they dont work.
[Code]...
View 10 Replies
Jan 18, 2003
I have a MC inside a Masked area, when i click it i want to duplicate it and drag it out side the mask!My code works exept the MC is still inside the masked area!!Heres a bonus question: Why cant i remove the MC with removeMovieClip.. the duplicated-MC is inside another MC.
View 4 Replies
Jul 6, 2010
I've previously posted for help using AC3 but now I've changed to AC2. Its regarding this duplication movieclip. What I've done is this, the side movie clip is supposed to duplicate another movieclip that can be dragged and dropped. Even after it is dropped, it is able to drag and drop again. When the user is done with it and needs to drag and drop another one, all they do is click on the template movieclip, and it should duplicate another one on the same spot of the template, allowing it to be able to drag and drop.So far, I've only been able to make it drag and drop and duplicate, but the duplication did not duplicate on the template's position. The clip that is dropped could not be moved after duplication.
View 9 Replies
Mar 2, 2006
i have created a button which its function is to duplicate another object. After pressed e button, it duplicate an object.it can duplicate as many as i need. e duplicated button is dragable.i cant drag the duplicated object.. somoone help me... it is regarding about school final project, urgent.
View 3 Replies
Feb 15, 2012
Going from AC2 to AC3. I have made a script that creates a dot (myTag) and a text label (nameLabel) when a button is pressed. Then the user is able to drag and drop the dots. This is what my script does so far. I want the text label to be hidden when dragging and displayed at the place where the dot is when user stops dragging.
Here is my code:
var tagArray:Array = [];
var labelArray:Array = [];
var nameCounter:int = 0
addLabelKnapp.addEventListener(MouseEvent.MOUSE_DOWN, addLabel);
function addLabel(event:MouseEvent):void {
[Code] .....
View 9 Replies
Jan 29, 2010
how to duplicate movie clips which allow me to drag every movie clip duplicated.
View 4 Replies
Jul 23, 2009
I have imported a video and all seems to go swimmingly, on publish to swf it appears as i would expect but the moment i view it in the html file the play back skin drops off?
View 2 Replies
Jan 16, 2007
I have an intro.swf file that is basically a movie with sound that is exported for actionscript but not exported in the first frame. I just stuck it in a movie on my timeline and it works great and the preloader works because it doesn't load the sound before the preloader. I use :
musicSound = new Sound();
musicSound.attachSound("music");
musicSound.start();
to play the sound in intro.swf.
However, now this intro.swf gets loaded into an index.swf and everything works fine and the sound plays as long as I have the sound included in BOTH the intro.swf and the index.swf and the sound is exported on the first frame in the index.swf. I was hoping I could remove the sound entirely from my index.swf since it already loads into the intro but so far
View 9 Replies
Oct 25, 2005
I have been having trouble creating a movie clip with a reverse rollover effect within a movie which has a reverse rollover effect. that sounds confusing
In essence I wish to create a panel that rolls out on rollover and rolls back in reverse when the you rollout. I have done this using this script
[Code]...
However I wish to make movies within this movie that have the same effect on them. But when I create another movie or button within this movie it is not registering on rollover. I guess because the script on the main movie overrides it?
View 2 Replies
Jan 30, 2010
I have a code here that drops a first row then drops a second row down right after. First row drops right away and second row is on a timer.
// Bring in first row
var blueY:Tween = new Tween(blue, "y", Bounce.easeOut, -295, -49, 2, true);
var pinkertonY:Tween = new Tween(pinkerton, "y", Bounce.easeOut, -295, -49, 2, true);
[Code]....
How would I drop each cover individually at random between two set numbers? I assume I would have to apply a separate timer for each one then somehow make the time at which it drops random between two numbers?
View 2 Replies
Jan 18, 2009
I'm in the process of converting a bunch of as2 projects to as3 and I'm having a rough start.
I have a swf with a couple of movieclips, a button (put on the stage), a button created in actionscript, and a UILoader created in actionscript.
I publish the swiff and open it, and everything works fine.
When I embed this in a web page, both buttons and the UI loader don't show up.
View 5 Replies
Oct 26, 2009
In a canvas, I am having a Box. Inside that box many panels are created at runtime. Right now I am able to drag and drop a panel at other panels position. So as a result all panels shift to right. Now when I drag a panel, I want that view should be as if that panel's image should look like moving. Rite now i am just using an image (dotted rectangle). But what i want it should like the instance of same panel.
View 3 Replies
Nov 25, 2009
There's this flash web page Im developing. All movement is 90% written in code (as oppose to it being created via designer mode). And for some reason the frame rate of page in browser just keeps dropping. Can someone tell me what that reason could be?I am aware of the fact that framerate does change from time to time but I think that after a while it should climb back up. But in my case it just keeps dropping (by the 9000. frame its like 2 fps) and there isnt memory leak cos used memory amout by browser stays the same
View 1 Replies
May 10, 2009
I have been working on a full flash website and am encountering a strange problem (or at least its strange to me).
I have the main shell of the site, which contains:The layoutNavigationA movieclip which pages are loaded into (external swf's)Some actionscript which streams in an MP3The controls for the background musicA piece of actionscript which loads an animated background (another external SWF)
I then have a series of pages in their own SWF's which get loaded into a movieclip within the shell when the user clicks the relevant button on the menu. Most of these pages contain:The panels for the content on that pageSome dynamic text areas for the text content on that pageSome actionscript which loads the content for that page from a couple of text files and populates the dynamic text areas Then there is a showreel, which has a menu and a customized FLVPlayback component to play audio and video tracks; the data for the menu and the tracks themselves are stored in XML files.
If I am using a connection over 2MBit: Initial preloader appears, shell loads, background music streams in nicely and then the content page is loaded in, panels animate in and the text content appears; all is well and its pretty quick.
If I throttle my bandwidth to below 2MBit (the main tests being done with the connection throttled to 1.5MBit), this happens: Initial preload appears, shell loads, background music streams in but takes a bit longer to start up, content page loads in, panels animate in and the content appears for about 2 seconds.
THEN the contents of the text areas disapears and the word "undefined" appears. So the content seems to be dropped. I've done some testing to identify the cause and if I comment out the code which streams in the background audio, the issue disapears and everything works fine, so it appears to be related to the audio. I will say, its not the most lightweight of sites; its quite graphically heavy (nothing too excessive though) and the background music is a 6MB MP3; the owner of the site is a movie composer so he has a lot of high quality streaming audio.
So I was wondering if anyone knows why this type of issue would occur, it seems strange that Flash would drop the content thats been loaded in, that background music would break the process.
View 6 Replies
Oct 21, 2009
Is there a way to prevent a motion tween w/ rotation from dropping on the Y axis? Basically I used Free Transform to change the angle of a line, but it always lowers itself on the Y axis when I insert a motion tween in it.
View 1 Replies
Jun 29, 2010
I've just upgraded from CS3 to CS5 and have discovered an annoying issue with cue points. When I open an existing FLA that has a movie with actionscript cuepoints and try to replace it with another movie (an updated version), Flash drops all my cue points and I have to re-enter them. Is there some way to prevent this?
View 2 Replies
Jul 29, 2010
We just bought two Decklink Studio cards to use with our live streaming servers.First, everything works fine. We have high quality flash live streaming, using SDI input with embedded audio.But after approximately 10 hours of streaming,the quality comes down, and the frame rate too, looks like the encoder start are dropping frames.Then if we just try to stop the live encoder, they freeze.The only way to close the program is forcing with CRTL+ ALT+ DEL.At this time, if we restart the FMLE, all works fine again, for more or less 10 hours.
View 1 Replies
Apr 1, 2011
what im doing is the user drags the lego piece from the tray and drops it on the red square and the next piece arrives to do that again and again. The issue is that sometimes it screws up and doesnt go to the next step or goes backwards in steps like its hitting invisible pieces. heres a link to the project in action on my [url]......
The code I am using to drag and drop is attached in a text file to check out if needed.
View 3 Replies
Sep 19, 2005
I'm creating a drag and drop movieclip to colour a different movieclip. I need to duplicate the first instance so as the original stays in the same place (on the pallette), and then the dragged one can be removed after it has been dropped into the area. This is the script for the dragging and dropping of the original instance, but I can't figure out the duplication/removal part:
on (press) {
startDrag("_root.pallette1");
this._alpha = 70;
[Code]....
View 2 Replies
Oct 19, 2009
i've built a little game, where the user can drag and drop objects on a canvas. there's a button wheren the canvas turns black, and the objetcs (images) become white, like a photographic image. What I'm trying to do without sucess until now, it to make the draggable objects infinit, so the user can drag as many objects as he can.
View 1 Replies
Sep 25, 2009
I am programming a card sort application in which I am dragging and dropping the cards on the boxes. While dropping these cards it should arrange them in a stack format. e.g. if card1 is dragged and dropped on box1 it will appear behind it, card2 behind card1 and so on. And if I want drag these dropped cards to another box these cards should be rearranged accordingly without showing any in between empty slots. Now the problem is when I drag these cards from the box I set relative depths to them. But the after doing this the cards get disabled.
View 6 Replies
Nov 5, 2010
so I'm making this tabbed interface, but somehow for my third tab, after i drag and drop stuff that are in it, I can't click on previous tabs (as in they don't do anything anymore). Here's the following code for my third tab:
<code>
words.addEventListener(MouseEvent.MOUSE_DOWN, doPress);
words.addEventListener(MouseEvent.MOUSE_UP, doRelease);
[code].....
View 5 Replies
Nov 26, 2009
We have a flex application communicating with our server. The flex app makes many HTTP requests (posts and gets) to the server, in many cases in parallel. We have been noticing that we get many dropped connections, experienced from the flex app. The server does not see any failed requests at all and is not under load. I am also suspecting that flex may be on-connection-drop, automatically retrying the POST or GET request, resulting in our server receiving the request twice.
View 2 Replies
Mar 26, 2012
I'm making a game similar to Kaboom for my actionscript class
[URL]
I realize I'm not even close to done and its probably shitty but this is my code so far:
var bucket:Bucket=new Bucket
var sun:Sun=new Sun
var fireBalls:Array=new Array()
[Code].....
I know I want to use a timer event or something to get the sun to switch directions randomly but I can't quite figure it out
this is an idea of what the swf looks like (its not loading everything in this simulation, the bucket is on the stage and moves left and right onKeyDown in reality):
[URL]
View 1 Replies
