In a canvas, I am having a Box. Inside that box many panels are created at runtime. Right now I am able to drag and drop a panel at other panels position. So as a result all panels shift to right. Now when I drag a panel, I want that view should be as if that panel's image should look like moving. Rite now i am just using an image (dotted rectangle). But what i want it should like the instance of same panel.
View 3 Replies
what im doing is the user drags the lego piece from the tray and drops it on the red square and the next piece arrives to do that again and again. The issue is that sometimes it screws up and doesnt go to the next step or goes backwards in steps like its hitting invisible pieces. heres a link to the project in action on my [url]......
The code I am using to drag and drop is attached in a text file to check out if needed.
I'm creating a drag and drop movieclip to colour a different movieclip. I need to duplicate the first instance so as the original stays in the same place (on the pallette), and then the dragged one can be removed after it has been dropped into the area. This is the script for the dragging and dropping of the original instance, but I can't figure out the duplication/removal part:
on (press) {
startDrag("_root.pallette1");
this._alpha = 70;
[Code]....
i've built a little game, where the user can drag and drop objects on a canvas. there's a button wheren the canvas turns black, and the objetcs (images) become white, like a photographic image. What I'm trying to do without sucess until now, it to make the draggable objects infinit, so the user can drag as many objects as he can.
View 1 RepliesI am programming a card sort application in which I am dragging and dropping the cards on the boxes. While dropping these cards it should arrange them in a stack format. e.g. if card1 is dragged and dropped on box1 it will appear behind it, card2 behind card1 and so on. And if I want drag these dropped cards to another box these cards should be rearranged accordingly without showing any in between empty slots. Now the problem is when I drag these cards from the box I set relative depths to them. But the after doing this the cards get disabled.
View 6 Repliesso I'm making this tabbed interface, but somehow for my third tab, after i drag and drop stuff that are in it, I can't click on previous tabs (as in they don't do anything anymore). Here's the following code for my third tab:
<code>
words.addEventListener(MouseEvent.MOUSE_DOWN, doPress);
words.addEventListener(MouseEvent.MOUSE_UP, doRelease);
[code].....
I'm working on a Flash project in which users are able to draw on the stage. Once they've drawn their lines and turned off the pen tool, though, I want them to be able to do something unusual. I want them to have the ability to drag and drop the lines they've drawn. I actually don't really care whether they pick up individual segments separately or everything together, but they need to be able to drag and drop in some way, shape or form.
The line-drawing code currently looks like this:
ActionScript Code:
onMouseDown = function(){
if (penOn) {
if (erased7 == true) {
[Code]......
When I make line7 draggable (by dynamically appending event handlers to the line after the user creates it), subsequent attempts by the user to draw lines cause the new lines to appear within the confines of the movieclip already created, no matter where the mouse button is pressed. The problem, as I've been able to determine, is essentially this: When you don't make the line draggable, the dimensions of the line movieclip expand every time the user clicks the mouse button. But appending the event handlers in effect freezes the movieclip, and its dimensions aren't changed after that, at least not by this code. I've tried workarounds, but no luck. I've also tried creating a new movieclip each time the user tries to draw another line, but that's failed as well
I have a Flex (3.5) Tree with drag & drop support, but the problem is that after I drag an item (node) and drop it, it's supposed to be the selected item in the tree, but for some reason it's not highlighted.
View 1 Replieshow can i let a move clip complete his motion tween movement after dragging and dropping it
i am using this code and there is a motion tween applies to the movie clip r_mc
[Code]...
i'm new to flash AS3. I am trying to create an drag drop activity where the user can match words and meanings by dropping and dragging into the right space. At the moment I want to create multiple drop areas for the boxes. At the moment they will only fall within their own target area - also only the boxes move and not the text. How do i create mutiple drop areas for the words and meanings?
[Code]....
I just downloaded Flash CS5 for mac which installed without any errors. However, when I first launched the software I am getting the following error: The following panel layout is missing or could not be read: /users/rob/Library/Application Support/Adobe/Flash CS5.5/en_US/Configuration/Workspace/Essentials.xml The application will not have a correct layout. load one from Windows ->Workspace Once past this message none of the panels load.
View 3 RepliesI have a map in a panel.When maximizing the panel,the map remain the smaller size.How to make the map growing synchronizely with the Panel? When maximizing the Panel,I added Resize Effects.How to apply Resize effects on the Map when the extent of the map changing? It seems to me that I should dispatch extentChange event when maximizing the panel.
View 1 RepliesI discovered this while doing some programmatic panel resizing:Components in a spark Panel will still be visible when their location is outside the physical Panel boundaries. This does not happen with the mx Panel.unning Flex 4.1 on Windows 7I tried putting mx and spark controls in the spark Panel, and they both appear outside of the boundaries. Note this doesn't happen with the mx Panel. What am I missing to make the spark behave like the mxSample Code:
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
[code].....
I want to create a panel docking to a pop up panel in my flex app, like Winamp's playlist window can dock to main window. but I didn't find any useful on docking in flex
I've traced the PopUpManager, but I didn't find any available interfaces or events about popup window's moving, I think it's design shouldn't be so bad.
Does anyone knows of a way to get the output panel in flash or the console panel in flex builder or flash builder, to format the "traces" with html or any thing else? for example:
trace( <b>brett</b> ); and to get that to appear in bold in the console window or the output window?
I have imported a video and all seems to go swimmingly, on publish to swf it appears as i would expect but the moment i view it in the html file the play back skin drops off?
View 2 RepliesI have a code here that drops a first row then drops a second row down right after. First row drops right away and second row is on a timer.
// Bring in first row
var blueY:Tween = new Tween(blue, "y", Bounce.easeOut, -295, -49, 2, true);
var pinkertonY:Tween = new Tween(pinkerton, "y", Bounce.easeOut, -295, -49, 2, true);
[Code]....
How would I drop each cover individually at random between two set numbers? I assume I would have to apply a separate timer for each one then somehow make the time at which it drops random between two numbers?
I'm in the process of converting a bunch of as2 projects to as3 and I'm having a rough start.
I have a swf with a couple of movieclips, a button (put on the stage), a button created in actionscript, and a UILoader created in actionscript.
I publish the swiff and open it, and everything works fine.
When I embed this in a web page, both buttons and the UI loader don't show up.
There's this flash web page Im developing. All movement is 90% written in code (as oppose to it being created via designer mode). And for some reason the frame rate of page in browser just keeps dropping. Can someone tell me what that reason could be?I am aware of the fact that framerate does change from time to time but I think that after a while it should climb back up. But in my case it just keeps dropping (by the 9000. frame its like 2 fps) and there isnt memory leak cos used memory amout by browser stays the same
View 1 RepliesI'm doing this drag and drop animation where object 1 is dragged to object 2. When object 1 is dropped onto object 2, I need more than one image of object 1 to appear. I've used this simple code for drag and drop:
on(press) {
startDrag(this,false);
}
on(release) {
stopDrag();
}
I have been working on a full flash website and am encountering a strange problem (or at least its strange to me).
I have the main shell of the site, which contains:The layoutNavigationA movieclip which pages are loaded into (external swf's)Some actionscript which streams in an MP3The controls for the background musicA piece of actionscript which loads an animated background (another external SWF)
I then have a series of pages in their own SWF's which get loaded into a movieclip within the shell when the user clicks the relevant button on the menu. Most of these pages contain:The panels for the content on that pageSome dynamic text areas for the text content on that pageSome actionscript which loads the content for that page from a couple of text files and populates the dynamic text areas Then there is a showreel, which has a menu and a customized FLVPlayback component to play audio and video tracks; the data for the menu and the tracks themselves are stored in XML files.
If I am using a connection over 2MBit: Initial preloader appears, shell loads, background music streams in nicely and then the content page is loaded in, panels animate in and the text content appears; all is well and its pretty quick.
If I throttle my bandwidth to below 2MBit (the main tests being done with the connection throttled to 1.5MBit), this happens: Initial preload appears, shell loads, background music streams in but takes a bit longer to start up, content page loads in, panels animate in and the content appears for about 2 seconds.
THEN the contents of the text areas disapears and the word "undefined" appears. So the content seems to be dropped. I've done some testing to identify the cause and if I comment out the code which streams in the background audio, the issue disapears and everything works fine, so it appears to be related to the audio. I will say, its not the most lightweight of sites; its quite graphically heavy (nothing too excessive though) and the background music is a 6MB MP3; the owner of the site is a movie composer so he has a lot of high quality streaming audio.
So I was wondering if anyone knows why this type of issue would occur, it seems strange that Flash would drop the content thats been loaded in, that background music would break the process.
Is there a way to prevent a motion tween w/ rotation from dropping on the Y axis? Basically I used Free Transform to change the angle of a line, but it always lowers itself on the Y axis when I insert a motion tween in it.
View 1 RepliesI've just upgraded from CS3 to CS5 and have discovered an annoying issue with cue points. When I open an existing FLA that has a movie with actionscript cuepoints and try to replace it with another movie (an updated version), Flash drops all my cue points and I have to re-enter them. Is there some way to prevent this?
View 2 RepliesWe just bought two Decklink Studio cards to use with our live streaming servers.First, everything works fine. We have high quality flash live streaming, using SDI input with embedded audio.But after approximately 10 hours of streaming,the quality comes down, and the frame rate too, looks like the encoder start are dropping frames.Then if we just try to stop the live encoder, they freeze.The only way to close the program is forcing with CRTL+ ALT+ DEL.At this time, if we restart the FMLE, all works fine again, for more or less 10 hours.
View 1 RepliesIs there any way of Duplicating a movie and then calling upon it to drag and drop it else where? I can't seem to get it working since the script for drag and drop calls upon an instance name - and the instance name for the duplicated movie has a variable at the end so its different all the timeeg duplicateMovieclip("movieclip", "instance name"+i, i)I don't even know if its possible calling upon an instance name that doesn't exist until something is clicked O.o;
View 1 RepliesWe have a flex application communicating with our server. The flex app makes many HTTP requests (posts and gets) to the server, in many cases in parallel. We have been noticing that we get many dropped connections, experienced from the flex app. The server does not see any failed requests at all and is not under load. I am also suspecting that flex may be on-connection-drop, automatically retrying the POST or GET request, resulting in our server receiving the request twice.
View 2 RepliesI'm making a game similar to Kaboom for my actionscript class
[URL]
I realize I'm not even close to done and its probably shitty but this is my code so far:
var bucket:Bucket=new Bucket
var sun:Sun=new Sun
var fireBalls:Array=new Array()
[Code].....
I know I want to use a timer event or something to get the sun to switch directions randomly but I can't quite figure it out
this is an idea of what the swf looks like (its not loading everything in this simulation, the bucket is on the stage and moves left and right onKeyDown in reality):
[URL]
I've managed to use a key listener to make this icon move. My next goal is to make the rest of the icons on stage sort scoot over. I can't use the mouse x or Hit Test property. Can this be done using just arrows and code?
- Icon on stage user uses arrow keys to select an icon.
- User selects icon with Enter key and initiates move with arrow keys.
- As user moves icon over the other icons on stage, they move or scoot over.
The selected icon then moves into new place. Animation.gif illustrates this.
I have basic movie clips, On roll over, show arrows [NEXT, PREVIOUS] on movie clip [they then show other images inside movie clips]I can show arrows on roll over.But when i roll over the arrows the main ROLLOUT function gets called, the arrows hide. I've tried several flagging methods and have resulted in using a larger invisible border around the clip, rolling over that hides them.
View 1 RepliesI have developed a Flash website using the Flash Player 10 and its 3D capabilities. The website seems to be working great on my PC which is a high end computer but when I have tested it out on slower computers, the animations are really choppy and frame rate is dropped a lot.can you take a look at the website and suggest me ideas what could be the result of such frame rate dropping. The website doesn't use much animations in the background.
View 2 Replies
