ActionScript 2.0 :: Embedding Windows Media Player?
Jun 13, 2005As the title states, is it possible to embed widows media player real player etc into my swf?
View 7 RepliesAs the title states, is it possible to embed widows media player real player etc into my swf?
View 7 RepliesI have a mp4 file which is to be used in an application. Currently i am in the stage of figuring out the technology to be used for this job. I am familiar with flex and am hoping that i be able to use it for the application. But i can not figure out a way to play the file in flex. I have been able to play the file only in windows media player and that required the installation of three codecs : Mp4Audio.ax, Mp4Video.ax, Mp4Src.ax.
As i see it, it will be very convenient if i could embed a windows media player plugin in flex or i could specify the audio and video codecs in the flash player
I am using Windows 10 media Player SDK and embedded windows media player into my application ( a typical video player with additional functions).In order to play flash files in Windows Media Player, I have the following patch / plugins installed on the same computer
1. Adobe flash player 10
2. Media Player 10
3. ffdshow-rev2265_20081028_clsid.exe
4. osflvsplitter.1.0.0.4_nt.exe
The application typically downloads a xml file (play list) from the designated server and then downloads the list of media available in that list.On successful downloading of the media files, which includes MOV, WMA, DIVX and SWF files, the player is expected to play the playlist continuously and each file once (one after the other).So, my player plays first file - abc.mov, then second file xyz.wma and then the third file klm.swf... and here it stops! It won't go further. The SWF file loops continuously.I have stop() in the last frame of the SWF file though.I am not able to move the player ahead playing other files.
How do i open an .avi file directly into windows media player or winamp on button click in flash.
View 2 RepliesI'm working on a project that I want to export as a .avi file. I'm using Flash 8. I can go through the steps of exporting the movie fine, but once I try to play it in Windows Media Player, I get this error:
"Windows Media Player cannot play the file. The Player might not support the file type or might not support the codec that was used to compress the file."
I've tried playing it in VLC and DIVX player as well I got similar error messages. This is a time sensative project,
Just installed Windows 7 RC (7100), and got the latest Flash player for IE8 and Opera. My site [URL] has a music player I created that plays (streams) MP3s from a Flash Comm Server I run. The player works fine with Flash Player version 10.0.22.87 on other platforms, but not in Windows 7. Once you pick a song, it should start immediately. Even clicking the play button doesn't work. The symptoms make me think there's a problem establishing the netconnection for streaming.
I've read Microsoft added streaming of some kind in Windows Media Player for Windows 7, could it be interfering?
Can I convert a Flash file to Quicktime or Windows Media Player? If so....how? (Also, is swf the only file format on Flash?) I've been reading I need to download some converter to do this.
View 5 RepliesI'm trying to make Windows Media Player style controls into my movie. I know how to do stop, play, and pause already, but I don't know how to do the progress bar. I tried searching in the actionscript help menu. I couldn't find any actions that retrieve total frames in the movie and current frame number.
View 2 RepliesWe have fusion charts which is based on flash. In Windows XP, characters in Flash are square boxes. In other OS it shows normally. XML are sent to Flash using FlashVars. You can check charts here: [URL] And this is a code which is embedding chart. I have added BOM in the begining of DataXml.
[Code]...
I have a swf file (little animation) created in swish and I want to put it in my windows form app like a header, I was reviewing the below link but it doesn't say too much, could someone give an example of how to do this?
Embedding Flash in a Windows Forms .NET app
Beside Flash Media Encoder, can I use a live stream from Windows Media Services?We have live streaming with Windows Media Server, but now want also offer to mobile devices, but we dont re-encode the entire streams (tvs) again, it would be great if we can use a stream from windows to tunnel it to flash media server.
View 1 RepliesLooking for info on available options for embedding flv in html using a player swf but without actually importing the flv into the swf, so that you can embed any number of flvs in any number of html pages without creating multiple swfs.I've found solutions online using various player swfs hosted around the Internet, but I'm hoping for a better solution. I'd like to host the player swf on my own servers, not someone else's. And I'd like to not have to deal with, e.g., external branding.Sample <object> code that references a player swf hosted at
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve rsion=6,0, 40,0" width="480" height="360"> <param name="flashvars" value="file=your-
[code].....
What is the best MP3 player for embedding on a website? Something simple but needs to have list of items to play instead of just plays single item
View 5 RepliesI have been following lee's tutorial on the XML driven mp3 player for a site. However, I have now gone to embed the finished file on an html page, all files for the player work individually, so if I run the SWF by itself it works fine! However, when previewing on the html page the music doesn't play and the titles don't appear. The files are all stored in a 'player' folder in the root folder, however the SWF is stored there too, so I cant imagine that's the problem, I have even tried moving all the files from the player folder directly into the root folder where the index html file is and it still doesn't work.
View 4 RepliesI hv a flash site that needs to have a FLV player in it. when i embed it in the html its not showing the player but plays the animation before it.is it that if i upload it then will i be able to see the flv player?
View 7 RepliesI have just created a Flex 3 project. I understand from the flex-config file that the mininum requirement for Flex Builder 3 is Flash 9 or above. I have Flash player 10 on my machine but when I launch my application in firefox. it gives the following error:
C:Programs Files (x86)Mozilla FirefoxpluginsNPSWF32.dll
Flex Builder cannot locate the required version of Flash Player. You might need to install Flash Player 9 or reinstall Flex Builder. Do you want to try to run your application with the current version?
FMS does not start in win 7.There were some starts but only when first run after the installation. (i checked it 3 times) After the computer reboot, FMS does not start. Whats the problemm ?
View 1 RepliesI've freshly installed the FSM 4 on windows7, but the start screen no runnng the rtmp video and the administration console no conecting, why?
my firewalls is down and my ports is open like adobe say... why no workig RTMP and my administration console no working?
Just installed Windows 7 RC (7100), and got the latest Flash player for IE8 and Opera. My site [URL] has a music player I created that plays (streams) MP3s from a Flash Comm Server I run. The player works fine with Flash Player version 10.0.22.87 on other platforms, but not in Windows 7. Once you pick a song, it should start immediately. Even clicking the play button doesn't work. The symptoms make me think there's a problem establishing the netconnection for streaming. Wondering if anyone else has Windows 7 specific problems with Flash player?
View 3 RepliesFor ages we have used the Flash Object in a .NET app for managing the development of eLearning. The embedding is done (I presume) in much the same way that IE embeds flash object (e.g. using a COM object which maps back to Flash10c.ocx)We are testing our application on Windows 7 RC 64-bit edition but the .NET application is unable to instantiate the Flash control, raising a "Class not Registered" error. Although the OS is 64-bit, the .NET app and Flash object are 32-bit and should work together without problems. I have confirmed that the IE browser (32-bit version) on the Windows 7 (x64) does indeed instantiate Flash files OK.
View 2 RepliesWhere do I find the download for flash player update for my new HTC HD2 phone?
View 1 RepliesI have my shiny new FMS 3.5 server. There is the multi-rate example which provides a "Cut and Paste" object tag to embed the video.... e.g.
<object width='640' height='377' id='videoPlayer' name='videoPlayer' type='application/x-shockwave-flash' classid='clsid:d27cdb6e-ae6d-11cf-96b8-444553540000' ><param name='movie' value='swfs/videoPlayer.swf' /> <param name='quality' value='high' /> <param name='bgcolor' value='#000000' /> <param name='allowfullscreen' value='true' /> <param name='flashvars' value= '&videoWidth=0&videoHeight=0&dsControl=manual&dsSensitivity=100&serve rURL=dynamicStream.smil&DS_Status=true&streamType=vod&autoStart=true&v
[code]....
I paste this into a web page hosted on another ( ordinary, nonFMS ) server, I see the player show up, but after 5 seconds I get message that the player cannot connect, please click Play to try again. Of course same work fine if the page is hosted out of webroot on the FMS server. So I assume the "example" does not include absolute URL's so I tried hacking in full URL's for the swfs/videoPlayer.swf and the rtmp:/ URLs to no avail. Which makes it a pretty poor "example" IMO. I also noticed that the .smil file itself also includes a relative URL to the vod app, I modified that as well - the object tags still works only when hosted from the /webroot folder.
So what should this "example" really look like with absolute URL's to use in a real way? Also is there some content protection mechanism which is preventing this from being embedded in other pages not hosted locally?
I understand that the Flash Interactiver Server has this feature called 'Adobe Media Player Tracking Service' which the free version dosen't have. Any idea what ' Adobe Media Player Tracking Service' is and what it does
View 2 RepliesI am trying to figure out if it's possible to embed an external flash music player (in this case sound cloud) to play some of my own tracks in my flash site. I don't want to create my own player as the sound cloud player is really nice and also has stats.
View 2 Repliesi want to make some test in flash media server and i want to install it in windows 7.in the past i can install it an work with it with no problem, now i try to install it and dont work.
View 1 RepliesI would like to completely disable the soundin Adobes Flash-Player in case of "nerving"Websites. Is there a way to disable the soundin Flash-Player, but without disabling the sound in
View 3 RepliesI have received a CD Rom with an .exe file on it. I only have an old Windows XP box (from 2001) but it doesn't play on it Is that possible? Do I need to find a vista box?houldn't these flash exe files be XP compatible? Sorry we only have Macs here so I'm a bit out of the loop when it comes to Windows machines.ed some light on this or confirm before I request another disc or purchase a vista CD ROM?
View 6 RepliesThe admin guide for flash 8/9 suggests there's a .msm (merge module) for windows? I'm not seeing a merge module for flash 10. Does such a thing exist and if so where?
View 1 RepliesI'm developing a flash application by using actionscript, Flex SDK and text editor.
I want make my flash application support InternetExplorer, FireFox and Chrome on Windows. But I'm developing it on Mac OSX.
How compatible is flash player of Mac OSX with flash player of Windows?
Do I have to test the application not only on Mac OSX but also on Windows?
How about compatibility with flash player of other OSes, for example, Android, Linux, Wii?
I have a ActiveX control hosting a flash-player which is in turn running a flash file trying to access data from a web-address.
In an old Windows Application version of my application everything works fine and the flash file is able to access the web-content.
However, in a newer Console Appliction version of the application it can no longer access the web-content.
Is there some kind of difference between a Windows Application and a Console application in terms of security/permissions that might affect an ActiveX hosted flash-player?