I'm trying to make a bit stream across my page when you mouseover a button. The bit stream can be quite long, so I wouldn't think to do it by hand. I'm wondering how I would go about making the stream start out, and how I can get each bit to follow the other right behind it. (They're about 10 pixels wide). I can get the for loop to duplicate the clips, but I can't seem to get them in order.
View 5 RepliesI'd like to have a scrollbar which scrolls movieclips that are created depending on whether there is the information available in an xml file.The image attached shows how the layout should be and the xml will be something like this:
Code:
<?xml version="1.0" encoding="UTF-8"?>
<root>
<myentry>[code]...
The kind of thing I want to create can be seen here... http:[url]...Click on 'engaging customers' and then you'll see a box to the right.I want to create something like that, but loading in the text from xml.
The scrollbar found here is good but I can't see how to implement the whole adding movieclips dynamically and then resizing the scrollbar etc.. http:[url]...Does this all include: loading in the xml, finding the node, creating a new movieclip, adding the xml information, resizing the scrollbar and then checking to see if there are anymore xml nodes?
ball2 is duplicated every 3 seconds and the gravity code is on the ball2 mc. this code is on frame one of the main timeline.Why when two of the ball2 mc's are on the stage does the hit test not work on one of them?
Code:
checkX = function (dx, oldVal, newVal) {
if (_root.paddle.hitTest(_root["ball2"+i])) {
[code]........
I am trying to load some thumbnails and I have a few items that seem logical to me, but they do not work. The lines that are commented out do not work for some reason. The width of each thumb is needed so that I can space them out evenly with like 20 pixels between each.Initially photoArray has the path to each jpg, then it is overwritten with the movie clip when they load. If anyone knows why these lines dont work or knows a more efficient manner to load thumbnail jpgs that would be cool.I 've also tried getProperty() with no avail. PEACE - I'M OUT
Code:
createEmptyMovieClip("thumbMC", -100);
for(i=0;i<10;i++)
[code].....
If I do a for loop like this, how can I reverse it so the last result is shown first?
for (var i=0; i<10; i++){ trace ("number " + i)}
i have a XML file with 10 links to images... what i want is to make flash load them and add them in the order they are written in the xml... so i came up with the code for that using Event.COMPLETE & if (stage.contains(something)) the thing is, my aim is to shorten my code and make it more professional using a for loop instead of repeating the code over and over... but all my trials were unsuccessful.how can i put my code in for loop.[code]
View 6 RepliesI have an array, and, when I use the for...in loop to add each element to a string in order, it appears to list them in descending rather than ascending order. I want to know if this is what its supposed to do and how i might be able to make it go in the right order.
View 2 RepliesCurrently I am trying to load 5 different swfs in order. Everytime a button is selected I want to move to the next swf. And once I reach 5 the next image should be 1 (again - loop). I started with a code like this on frame 1 in "scene 1":
Code:
gotoAndPlay(50);
Stage.align = "T";
Stage.scaleMode = "noScale";
_root.j = 1;
where "_root.j = 1" ----- "1" is the first swf loaded. But it was stuck on 1.
My newbie skills figured this out so to avoid zero, but it's random. And things repeat too closely.
Code:
gotoAndPlay(50);
Stage.align = "T";
Stage.scaleMode = "noScale";
_root.j = random(4)+1;
My Question: What can "_root.j" equal so that 1,2,3,4,5 cycles? I have to work within these parameters cause this template is deep.
I am creating an order form for my flash site. I have never done this before in flash but I have in visual basic. I have a few questions:
1. Is assigning variable names to checkboxes and radio buttons the same as in visual basic? I mean i know that you probably assign them in the properties. ex..say i name a radio button 'radio1', to run a check in my actionscript whether radio1 was checked or not would it be something like if(radio1){}
2. After the person fills out the form I would like to have the results of the order sent to a pre-specified email adress in a certain format. What would be a good way to do this?
sorting number Ascending Order and Descending Order tutorial with out useing sort property[Array sorting like 91,3,5,4,6,8,3,6,1,0]
View 6 Replies[code]how to do Ascending Order and Descending Order this array merge(don't use sort property)
View 1 RepliesI have an array, and I add info dynamically into it. I need some way to re-order the array into ascending order.
Another thing. How can I add a value in the first position of the array pulling keeping all the other values jumping to the next position.
I would like to create a loop so the icons in the menu continually loop indefinitly.[code]
View 2 RepliesI am attempting to use a loop to create text field with the loop's current value. The code looks like this:
ActionScript Code:
for (var i = 1; i<=10; i++) {
var 'nameHolder'+[i]+'_txt':TLFTextField = new TLFTextField();
'nameHolder'+[i]+'_txt'.x = 40
'nameHolder'+[i]+'_txt'.y = 40
'nameHolder'+[i]+'_txt'.text = "Hello World"
}
So essentially what it should do is create 10 text fields at 40, 40 with the text: "Hello World".
i'm trying to do an infinate loop for my m.clip.the looping part does not want to loop...it loops back to my firrst frame even though there are two same picture in the movie clip.....here's a sample of what i use for the infinate loop script..
[Code]...
I have need of loops / nested loops that pick different figures depending on where you are in the loop. The whole function needs to run through 'ml' times. 'ml' is a dynamic figure. Loop 1 = While the loop is within the first 12 iterations, 'exconemp' must equal 100. For iterations 13 - 24, 'exconemp' must equal 102.5, for 25 - 36 it will be 105.06, for 37 - 48 it will be 107.69. This needs to change every 12th iteration until it has reached 'ml'. The calculation takes the value of the previous 'exconemp' and then multiplies that by 0.025.
Loop 2 = While the loop is within the first 120 iterations, 'abc' must equal 0.015 and any further iterations must use 0.01. This must also work in a way to figure out whether 'ml' is higher or lower than 120 and work accordingly. My main issue is this - how do I get the loops to run through as this: While the iteration is < 12, do this, THEN take the final figure (12th iteration) and start on 13 - 24, do this THEN etc etc. How do I produce a THEN statement? I can get the code to pick up the final values, but not change along the way.
[Code]...
Say, I had a loop in a function...
[Code]....
How would I refer to a in another function
Should I declare the _mcContainer var before the loop or no? (performance increase?)
for(var i:uint = _startIndex; i <= _endIndex; ++i){
var _mcContainer:MovieClip = _mcParent["i_" + _position];
}
[Code]....
Recently I'd been criticized for structuring my for loops like so:
var i:MovieClip;
for each(i in array)
{
[Code]....
This reads better for me personally, yet I'm being attacked for it. Is there any difference?
basically I need a loop within a loop to compare two different arrays in my actionscript3 lottery game. I have attempted the loop but I cannot seem to get it to work ...
[Code]....
So basically within this code check_win is a button. Once the button is clicked it runs the loop. It is meant to take an instance of matches which contains 6 properties and loop until index is greater than matches. According to my output this is happening but the second loop doesn't appear to do anything.
How do i word a for loop to make it loop through multiple arrays?I want 1 for loop to loop through multiple arrays in order to move/alter objects.I want to keep the arrays separate.
ActionScript Code:
characters = new Array();
characters[0] = male;
[code]........
I'm trying to make a matching pairs game. First of all I'm making all the tiles, using a loop inside a loop. How do I get the ID of an item inside that loop? My code looks like follow:
Code:
var matches:Array=new Array(1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8);
makeTiles();
function makeTiles() {
[Code].....
dayVal = day.value;
for(dayVal = 1; dayVal/7 != 1; dayVal++)
{trace (dayVal);
}
the loop starts at 0 and not 1 so the loop ends at 6 does any one know how to resolve this issue?? its so that what ever number dayVal is it will be rounded up to a number that is Divisble by 7 .
Basically, I have data organized by date in an XML file. I'm trying to make a website application that will allow the user to click on a date (in a text field) to see another textfield populate with all the data under that particular date. So far, all the information loads into the textboxes at the same time. How can I get it to only load information under a particular date when somebody clicks on that date?
Before I started this project, I was convinced I could do this by manipulating the [j] (see code below) in the myFunc2 function. Currently, it's set up to increment blank_mc._y by whatever value is returned by [j]. But for some reason this doesn't work. I feel that if I could atleas get this part to work - I could probably do the rest.
AS code:
Code:
function loadXML(loaded) {
if (loaded) {
var nodes = this.firstChild;
[code]....
I have some code that seems to have a problem. I can't seem to pass the x variable from one loop to within another loop.
Code:
var myLv = new LoadVars();
var myNv = new LoadVars();[code]....
wondering if anyone knows if its possible to have a pause within a 'for loop' before it runs through the next loop? heres the script i've built up so far, i'm running off other variables and arrays to pull in the logos and the animating in is working fine except that they all run in at the same time, basically what i want is that they would run one after the other with a 5 second gap between them..[code]so i did that and put wait(delay); after the var boxcounter=2; in each of the If statements.. but no luck... can anyone shed any light? or suggest a way it get it to hold for a few seconds before running though the loop again? or am i going about this in completely the wrong way??!
View 5 RepliesI have published my intro to my website I checked "Loop" and unchecked "Loop" under the Flash section of publishing no matter which I it continues to loop and not go to my website. This is the action I am using:[URL]...
View 1 RepliesI have a variable in a loop that i want to access in a function outside of the loop. However the variable gets deleted when the loop is closed so no longer exists when i call in the function.here is the code; i'm trying to access the variable picHeight from within the scroll function
Code:
pauseTime = 3000;
xmlImages = new XML();
[code].....
I'm trying to synchronize external subtitles with my custom video player - Not FLVPlayback.Subtitles are in XML object from 0 - 12.I created a Timer that is checking when the subtitle 0 should be displayed according to playback time.I want to reach that after subtitle 0 disappear the next subtitle 1 will be checked when should be displayed.So all I want is 0 + 1But it is Timer and the result after Subtitle 0 disappear is 0+1+1+1+1+1+1+1+1+1+1+1 ad infinity And thats too many as I only want once add 1.
View 1 Repliesi have tried to keep this as simple as possible in order to demonstrate my confusion - i have looked at this for too long now and i really dont understand how this for loop works - sorry for the example length.
[Code]....
i can fully see how things work up until i hit the FOR LOOP EVALUATION: child !=null at that point the loop is broken and the trace statements with xxxxx and yyyy come into play but why is there 4 lots of x and y traces? if the loop is broken and child = null which it does why does the statement carry on 4 more times - should it not just return? i understand that the update part of the for loop will execute only at the end of the loop but this still does not show why it should carry on like this?