Im expeirementing with snow 2.0 and have changed the small snow object to a larger dollar bill. What I cant figure out is how to allow the movie clip to fall completely off stage before it dissapears.
View 2 Replieshow can i enlarge the hit area of a button when i'm over it? i tried creating a movieclip ("mc") containing two frames; one frame ("normal") with a button including a small hit area, and one with a button containing a larger hit area (framename="over"). when i roll over the movie clip it sucessfully changes to frame "over" with the large hit area button (from root i tell "mc" to cange to frame "over"), but in fact only up,over and down state frames are taken from the new button. the hit area is still the small one from the first frame.
basically the thing i want to achieve is, that one rolls over the button, but will have to move his mouse farer away from the overstate graphic of the button, to release it. so optically the same button, but with a larger hitarea than the one you entered when rolling over the button in the first place, so one cant accidentally get off of it too early.
if this is posted elsewhere I searched but could not find topic. I would like to know if there is a way to enlarge the size of the target drop point. Seems the users have to be spot on or the shape snaps back.
Any way to give users a little more wiggle room with target drops?
I have been trying to find a tutorial or actionscript on the web which will allow users to" click on an image to enlarge it " when they vew the webpage. Its such a common thing , but haven't had any luck whatsoever .Can someone please refer me to a link/tutorial on how to do this?
View 2 RepliesI'm building my first website in Flash, and it's a porfolio website. I'm trying to set up my portfolio page to show screenshots of my graphic design projects, and when a user clicks on them, it enlarges the photo.
I am looking for it to be done like this website below when you click on their photo samples, it enlarges it, where you can also go to the next photo.
How do I enlarge a pic when on(rollOver)?Current code:
Code:
on (rollOver) {
_root.pop(2, _root.box); (<--not related to enlarging)
setInterval (_root.enlarge(), 1000);[code]....
and how do I make it enlarge equally in all directions (meaning not just to 4th quarter on x,y scale)
I'm using Flash 8. The font in the files is very very small, nearly unreadable. There is no option to enlarge the font, and Ctrl+ does nothing.
View 5 RepliesIs there a way wherein I can enlarge the document property size and force the contents to align to the center? I'm new, so I probably started backwards. I made my file with animation just how I wanted it, then realized it would look better if I put a frame around it. But, when I enlarge the document properties to accommodate the frame, all content, including associated animations, are top flush left. I need them middle center.
View 3 RepliesI've completed my first character in Flash. Happy with it's performance. Got eyes blinking, mouth syncing, and hands gesturing. But the character doesn't fill the screen the way I want. I need this to be a close-up shot of the character.When I go to enlarge the character it screws everything up because the head and body are keyed separately.Shouldn't there be a simple way to just group and scale the whole character without messing up the performance inside?
View 2 Repliesi got have a bunch of thumbnail sized movie clips that i can drag and drop. reason for this is its a shopping cart.i really would like to have a big preview available without having to link outside of the page not extremely large but larger for better viewing.i have no current code that works at all for me at this time other then the one that loads in a new window/URL which is not what i want maybe bring in image or image url to inside window would work.
View 6 RepliesFollowing is the part where i am trying to attach the enlarged images that are already placed in the folder but i dont know what to add to make it work. I only tried to enlarge the first thumb but it doesn't work on that either. All it does is show a small scaled thumb of that enlarged image on the stage.
enlargeMC is a mc that is on stage.
ActionScript Code:
for (p=1; p<=_global.imagesNumber1; p++)
{
//my_pb._visible = false;
[Code].....
The Problem I have is that I need to enlarge my Movie from the standard 550 x 400 to an equal proportioned 825 x 600.But when I do that it only enlarges the one Frame that I am on in that moment. How can I enlarge everything at once?
View 3 RepliesIs there a way to easily way double the size of the entire flash document?
View 1 RepliesHow to programmatically enlarge a flex 3 button's hitArea. Is there some function that I can override? There is no function in the button class called hitArea. What I have done is, I have created a programmaticskin for a button. The form of the skin consists out four arrows. In between the arrows there is nothing (meaning transparent). Because of the way the skin is shaped, it's difficult to click on the button. The skin has alter the buttons hitArea. What I'm looking for is a way to enlarge the hitArea and alter the hitArea shape in to an square. (the hit area must ofcourse still be invisible).
View 4 Repliesi have a drop down menu am working on and each button tab (although they are not button instances !) when clicked opens up the "drop down" section which you can mouse over to choose another specific button etc - if you mouse out of that drop down area then it pulls back up to the original tab state .. what do i change to the code below to decrease the area that you mouse out of to make the drop down area pull back .....at the moment it at least two inches on the screen below and to the right of boundaries of the drop down box before it pulls up - i want to it pull up as the mouse leaves the boundary box .... hope this makes sense .... there is some part of the actionscipt below that controls this but can work out which bit and how to change it !!! (am guessing the x mouse and y mouse bits - but how to change it ???)
[Code]...
I have this function:
public static function cloneDpObj(target:DisplayObject):Bitmap
{
var duplicate:Bitmap;
[code]....
to clone target displayObject (MovieClip or Sprite) and return Bitmap Object.
It can get bitmap from the target object, but it seem don't get all the area of the image.
By give the width and height of target object, but the target object in design was applied by Glow Effect, so my question can we get the all view of bitmapdata from a displayobject?
I have a movie clip named circle_mc(see the image on the link below) and a mask object(movie clip) which determines visible area of the circle. User can change the portion which is visible (extend the red area and make it red+blue, gray area is invisible). I need to find proportion of visible area to invisible area (red+blue/gray) so that I can calculate angle.
View 1 RepliesI would like to first add the xml to my flash. Fine I can do this.But I have a number of buttons, where when I click say CW1, i get the information from the XML file with a node of CW1. I have all the xml set up fine.As I have about eight different postcode types.
ST, CW, CH, TF, WV, WS, DE, SK, SY, and each of these may have numbers that follow, i.e ST1, ST2, ST3 and so forth.
So I can only assume that the postal area could be the main nodes, and the numbers inside the child nodes, am I right thus far.o how can i load the area of the xml file into my text area on mouse click, pulling the information relating.
However I'd need to be able to draw *only* on the board area (a 450 x 350 pixels area) instead on the whole movie... how to "tweak it?" Here's the fla: [URL]
View 8 RepliesI have Particle animation like this this PHP Code:
[Code]...
But i want that Object moving in limited area or masked area. I add masked area like this PHP Code:
[Code]...
But it still not working. Any advice ?? or correction in my script code?
I'm working on a schoolproject and I have a flashapplication that I want on my site. In this image you see a horizontal scrollbar and a vertical scrollbar. In the middle are the photographs, those you'll click in the horizontal scrollbar and they will enlarge (with some text). That's the red arrow. The yellow arrow is the thing I wanted too. When you click a photograph in the horizontal bar en you hold em, you can drag that photograph in the vertical bar and drop it there.
View 4 RepliesIs it possible? What I'm trying to do is enlarge the hitArea for a selected movieclip on my stage, but only onRollover. I have 5 MCs on my stage acting as buttons of sorts. onRollover of any of the clips, they grow in scale and I'd like the hitArea to do the same so they (MC and hitArea) are proportional.
View 2 RepliesI'm going to have a row of images all of which will need to enlarge when you mouse over. the images surrounding the enlarged image will need to shirk when it enlarges. So I have multiple images that need to shrink and grow depending one which image is moused over.
View 7 RepliesI am making some buttons that enlarge and then fall back to their original size when you mouse over them. The font used is a pixel font and this blurs when you do the mouse over. Is there anyway you can make them so they dont blur?
This is the code on the movie clips:
onClipEvent (load) {
xlen = 100;
ylen = 100;
xscale = _xscale;
yscale = _yscale;
[Code] .....
I'm programming a game for my Advanced Higher Computing class, and am doing a whack a mole style game. I am trying to program for the bit where when you click the moving movie clip, then the score is increased by 1.
if(mousedown){
if(movieClip contains mouseXCoOrd){
if(movieClip contains mouseYCoOrd) {
score ++
}
}
}
I just want to do not allow editing at some area of text area in flex. How it can be done?let suppose text length in text area is 50 characters, i want to allow editing if cursor position is less than 15, and if cursor position in text area is greater than 15 it should not allow user to add more text in text area.If user press any key it should not add any character in text area.[code]
View 1 Replieshave a question. Is it possible to detect whether the user used or is using ctrl+scroll to enlarge the screen? I was looking at an example of a mouse avoiding game, which could easily be cheated on using ctrl+scroll, so that the passages were larger etc.
Is there any way to detect this inside Flash, and perhaps prevent it?
I have a building type animation where many buildings enlarge then I want a small bouncing type animation once they do... I don't want to do this all manually as I have 100s.... Is there an easy way to do this with AS3?
View 3 Repliescan someone give me an idea how I would use a function to enlarge and change the alpha of a button but make it span over a period of time like it was an animation.a long time ago on gear78.com I think he used functions to make his buttons do what they did and it was badass. if I find another site I will post a link. if you don't know what the heck I am talking about tell me and I will try and explain it more.
View 2 RepliesI have made a movieclip and gave the frame this actionscript:
------------------------------------------------------------
var keyListener:Object = new Object();
keyListener.onKeyDown = function() {[code]........
it moves fine and stuff but i was wondering how can i restrict the area in which the movieclip can actually move ? my flash file is 550px X 400px and i want to make it so that it can only move in 300px X 200px of the file if you understand ?