I am trying to get a handle on the setTimeout command and I can't seem to get it to function at all. As a test I set up a simple movie where two objects fade in, one after the other. But whatever I try, they both fade in together.
Code:
_global.setTimeout()
stop();
onLoad = function(){
box1_mc._alpha = 0;
box2_mc._alpha = 0;
[Code] .....
I am trying to get a handle on the setTimeout command and I can't seem to get it to function at all. As a test I set up a simple movie where two objects fade in, one after the other. But whatever I try, they both fade in together.[code]
View 8 RepliesI cannot get the clearInterval command to work. I have a panel that is tweening down into the stage about 4 seconds after the movie loads and then I do not want it to happen again. Right now the panel continues to tween in everytime I close it. Right now, the clearInterval is not working.
var down:Boolean;
var currentInterval:Number;
down=false;
[Code].....
I checked out a lot of sites but can't figure out how to do this. without the mask my animation of a button growing bigger works well, the stop command is respected. But i want an image inside the form of the button that grows larger, so i took a picture on a layer below it, and made the button into a mask. visually, it works fine, but it loops, since the layer in mask mode doesn't respect the stop ();
View 1 RepliesI have several buttons in my Flash file that direct to an external URL with the openUrl command. That always works. However, in some cases I used _self to open the new URL in the same tab, and in other I used _blank to open it in a new tab, but that doesn't work consistently. Sometimes the one labeled _blank opens the URL in the same tab, and vice versa. Is there another way to define whether I want the new URL to open in a new tab or not?
View 2 RepliesI am using CS3 actionscript 2. I am having trouble with the preloader. It works, but it is causing the stop commands throughout the rest of the movie to not work. I know it is the preloader because when I remove it, it works. It is just a basic preloader. index12.fla has it with the preloader and index13.fla doesn't.[URL]...
View 3 RepliesI use stage in my scrollbar: this.stage.addEventListener (MouseEvent.MOUSE_UP, stopScroll); When I load this .swf into my main swf the stage command does not work. I still want to use stage, is this possible?
View 4 RepliesI have a photographer's portfolio site in the works. I'm using loadMovie connected to thumbail buttons of each photo to show a larger version of the photo. Here is the script[code]...
Now the photographer would also like to have a next/previous arrow buttons so the user can click through like a slide show. Is there a way to have Flash know what movie is currently loaded and based on that information go to the next or previous?
How can I get a button to work when its nested in a MC that has an onEnterFrame with a onPress command targeted to it?
Here's the code for my "popup" MC located on the main timeline.
popup.onEnterFrame = function(){
this.onPress = function() {
this.startDrag(false);
[code]....
Within that same MC is a button that tells it to close. However, I run a trace command to it and nothing happens. It seems like the onPress nested in the onEnterFrame is over-riding my button on(press).
Well i have an adobe air which runs vlc-player at background as service. i check that in Windows Task Manager , the service runs when air application launches.
here is the code
processArgs.push("--extraintf");
processArgs.push("rc"); //Remote control
processArgs.push("--rc-fake-tty"); //Use terminal as output
[code]......
I want to call 3 commands one by one , the relation between each commands are command should execute one by one in the previous command result. How to Queue Command's? What is the best practice to handle Queue command , my requirement is adding n number of commands and execute them.Main -> Execute c1c1 got the Result - Execute c2c2 got the Result - Execute c3
View 2 Replieswhat is the setTimeout function in Flex 4?I tried the old methods like setTimeout () or setInterval but not working, not found any web references as well, anyone know?
View 1 RepliesI am trying to open lotus notes application from Flash CS5 using navigateToURL.
When I click button, the application opens along with a blank window. So I used setTimeout to close the blank window. But the below script works fine with firefox but not with IE. The blank window not closing in IE.
the button action is:
var js:URLRequest=new URLRequest();
js.url="javascript:newWindow=window.open('http:
//servername/mroom.nsf/agtReserveRoom?OpenAgent&Location=roomname','poppe
[Code].....
I'm setting up a Timeout/Interval in a function but the called function gets invoked only once (so mc._alpha = 1 in the end)! I've tried setting the timer variable as toplevel but that didn't help either.
Here's the code:
Code:
function colortrans(mc, newcol) {
_root.attachMovie("box", mcdup, 2);
colorchange = new Color(mc);
[code]....
I use the setTimeout() function through my application but when its time to garbage collect. the method still runs and calls on a function. How do I stop it from calling on a certain function. I tried setting it to null but it doesnt work
View 4 Repliesvar clearId:int = setTimeout(function():void{
//some code here
clearTimeout(clearId);
[code].....
tried to prepare this source so that it is organized and clear enough to figure out what I (an idiot when it comes to scripting/programming) have done so farI have a slideshow with a function ("wait();"), which uses setTimeout to move the main timeline to the next frame (via nextFrame) after 4seconds(4000ms) have passed. The only exception to this, is on the last frame (Frame 7), where the timeline is to move back to frame 2. This is done using a simple conditional statement.. and all is well so far. Pretty simple.
The problem lies in that I have a set of 6 buttons across the bottom - each corresponding to one of the 6 'slides' that I'm sliding through. Right now, the code on these buttons uses gotoAndPlay, and jumping around from frame to frame in this way screws up the timer.As you click the buttons, the timer is still ticking.. and you start to see multiple advances, I assume each click of the buttons starts a new 'clock'.. each forcing a "nextFrame" as soon as their done, despite the other timers going on.What I need - is for the buttons to send the timeline to the appropriate frame, and turn ALL timers off. That is - if a user clicks a button, they have indicated which slide they want to see - and I want to stop the slideshow entirely. As soon as a user clicks any button, the only way they will see the other 5 slides if they also click those buttons.So the slideshow is built as follows:Frame 1: a basic preloader, followed by this code:
Code:
//setTimeout code
function wait()
[code].....
I have a mouse over event that triggers a setTimeout event. I'd like to clear that event from happening if the user rollOuts of the button. I basically need to figure out how to clear my setTimeout event.
Code:
bButton.onRollOver = function()
{
_root.countdown._visible = true;[code].....
I have an old Macromedia program - Authorware, that doe not like the SWF file output from the new CS Flash. I am able to go back to the old Flash version to get output that works - only 4-5 versions back - MX2004 or maybe CS.
I need to create an equivalent using timeline controls?
I was thinking of using a onEnterFrame. Have it loop till frame cycles hit the time I need i.e. 24 fps x 2sec = 48 frame cycles. then I would advance the main play head.
I'm trying to load a .swf into a containerMC with a button action. I want it to delay the loadMovie action for 1 second to allow an out animation to finish playing. The buttons (next and back) are in a MC on the main timeline of the swf.
I have this code in 1st frame of main timeline:
_global.nextMC = function() {
_root.containerMC.loadMovie("images/folio/chevron.swf");
};
[Code].....
I feel like I'm close, but probably just am missing something here in my setTimeout syntax.
I am trying to write a function that calculates the estimated time remaining for the movie to load. I have a function written that gets that information and I run it again with a setTimeout for 1 second then take the difference... blah blah blah. My issue gets me before i can get that calculating goodness off the ground. The first time i run the function without the setTimeout it works correctly. When i use the setTimeout, it returns the boolean value "1" signifying that it ran and didn't fail. Somewhere in there it loses the value returned by the called function. Any thoughts? I'm sure this may not be the most efficient method for doing what I want, but it bugs me nonetheless why this isn't working.Here's my code:
Code:
function getDeltaBytesLoaded(target_mc) {
var sample1:Number = new Number();[code]......
The Symptoms: pop ups intermittently blocked/let through from external interface and navigateToURL combinations.The Problem: Flash (or the browser..not sure) wont let pop ups be triggered outside of a time range and/or an event duration.The Environment: I have an app that needs to send data via zendAMF, do some processing and be sent back to the flash player. On the response, if certain conditions are met true - then trigger a pop open window. The same code that gets blocked on response, works directly from a mouse event trigger.So i set up a basic situation: 6 buttons, calling 3 methods. 3 buttons would call the method directly (all open the window perfectly) the other three would get the value of a numeric stepper, and use setTimeout(openWinMethod, NumericStepper.value) to simulate a delayed call from the zendAMF response.
UPDATE : if i select the 'navigateToURL, no delay' button first, close that window, then try any of the other delay calls - they work. its like the browser accepts that you have clicked to open a window at some point and therefore are allowed to call from a delay then on. (firefox only)All three using the delay would be blocked (firefox and chrome) whereas all three directly would open.afari - as well documented, would only work on the 2 methods using navigateToURLf interest: the js function in the html wrapper would be called be external interface to open a window. Without a delay this worked. With a delay, the js function would be called (as verified by some alert statements) but a new window was never spawned./popup/
here is my as3 class:
package
{
[code].....
I'm using this var timer2 = setTimeout(checkValue2, 2000);
as a frame action in Frame 2, which then triggers checkValue2 which is a piece of function in Frame 1 where all the _global. variables are as well.
clearTimeout(timer2);
gotoAndStop(3); //goto lvl3 - throw
addStage3();
it'd then goto Frame 3, but, the problem is even after clearing, the frame animation still loops every 2 seconds, regardless whether i'm using setTimeout or setInterval. Do you might know of any other way where what I need is, after 2 seconds in Frame 2, it'd then move to Frame 3, which I don't want it to go anywhere yet.
I'm new to Adobe Flash and especially new to Actionscript. Could somebody give an example and explain how to make and "Ignore *this* command if..." style command. Here's what I want to achieve:I have made a button (I may have done it in an odd way but it works) that moves when the mouse hovers over it and then moves back when the mouse moves away. I plan to put the finished product into Dreamweaver and have tried what I've done so far and it works. The problem is that if I move the mouse away before the first animation of the button has finished. It doesn't reach the *Mouse Out* command and then just sticks/stops in the bit where I have put a *stop* command.Basically, what I want is a way to ignore a command if something happens earlier on (such as the cursor being moved away).I've tried to explain the best I can without actually screenshotting it and copying commands.
View 6 RepliesI am using setTimeout() to call a function called "finished" after a 1000ms pause, which works absolutely fine until I try to pass a variable with it.
[Code]....
I have 2 movie clips, one names mc_frame01 and another mc_frame02. I've tried to set variables and arguments to make it easier when theres more mc_frameXX's. All I want the animation to do is first MC slides in from the right, pauses, then slides off to the left. Then repeat for each MC. With the code below, both MC's seem to slide in from the right at the same time and that's it.
[Code]..
I have a movie clip with a stop command on frame 1 and a stop command on frame 20.I'm trying to have two separate buttons that tell the MC (onRollOver) to play forward or to play backwards.
The actionscript on button #1-
PHP Code:
on(rollOver){ gotoAndPlay(_currentframe +1);}
The actionscript on button #2-
[Code]...
What have I done wrong here? I need a movieClip to fade out, pause, then a new movieClip to fade in.
[Code]....
What I've tried to do is to set the target_MC alpha to 0 and fade out the current mc. Then when the fadeOut has completed to setTimeOut. After this the mcs will swapDepths and the target_MC should fade up to alpha = 0I've attached the flash and xml files. The images were too large.
I have created a SWF file that streams an FLV file.What I would like to do, is have an actionscript command activate AFTER the FLV has played to the end of the movie.
View 3 RepliesI am new to Flash and working with a site template that uses a xml data file. In the animation there are a couple of 'read more' links that when pressed, the movie animates to a read more screen with basic info depending on which it is (read more 1, read more 2, ...) In Flash I have added an image on one of the main pages and I would like it to link to the same readmore just as one of the text links does.
The xml has the following line for editing the text, so I see how it is calling the readme page with asfunction, but I have no idea how to use actionscript (or behaviors?) within the flash document to mimic this with an image as the link. I am guessing its something simple but I have yet to stumble upon it.[code]...