I'm trying to make certain variables I have, increase by a set variable amount every 1 second, in a continuous loop. However, everything I've tried (using 'for' or 'setInterval') never seems to work for me.
View 2 RepliesHow can I increase the _height property of a window without increase the height of the title and the bar at the top of the window ?
I want only to increase the part of the window where I put textFields and buttons.
I'm having a strange issue with an incremental rotator. Using Tweener, i just want a square to rotate by 15 degrees each time the stage is clicked. This works perfectly until the rotation get larger than 200. At that point the square spins a full loop before landing on the correct location. All I'm looking for is to have it be +=15 from where it currently is.[code]
View 2 RepliesI'm having a few issues with incrementing numbers in variable names, was wondering if I could getThe below code is what I'm trying to implement, but I keep getting errors.
Code:
for( var i = 0; i < __values.length-1; i++)
{
[code]......
Making a line chart with 20 increments that draws itself across the screen as the user drags an icon.Works great using lineTo as the user moves the icon to the right.But I do not see a method to get the line to disappear step by step as the user drags the icon the opposite way, to the left.I could always animate with a non-actionscript line, using a mask that moves left and right, but I was hoping there was some actionscript command that could clear the previous segment of the line drawn, without having to redraw the entire line. clear(); gets rid of the entire line, not individual segments.
View 4 RepliesI'm making an activity that involves measuring the depth of a fictitious river at various points. I have an array containing those depths at the various points and a slider for traversing through the depths and outputting to a textfield.
As the user moves the slider up and down, they can see the depth of the river at that point and plot it onto a graph. What I would like to do is be able to figure out the depths inbetween the explicitly defined values.
here is the code, it's pretty simple:
[Code].....
How would I go about figuring out the values inbetween?
How can I script a preloader bar where the percentage loaded is directly proportionate the the _alpha of the bar so that 0% loaded would make the preloader bar 0% alpha (fully transparent) and...well you get the point. How could I do this?
View 1 RepliesIs there a way to automatically generate a build number for my swfs? Ideally, this should be available as a variable so it can be shown when the application or module runs, and should increment whenever I click save or build or debug. I've seen vague references to ANT being able to handle this, but have no clue how to implement that functionality into either Flash or Flex Builder... I'd assume an XML or TXT file somehow gets updated via ANT and would then be compiled into the swf???
View 6 RepliesHow do I assign incremental names as each ball instance is placed on stage?
/*
w = width of circ
h = height of circ
c = num or columns
[Code]......
im looking for how to remove a setInterval. i searched but the answer which was supposed to work dident for me.
[Code]...
I have a swf which embeds around 40 various png and fxg objects using the embed metatag... eg.:
public class OneOfMyEbeddedAssets
{
[Embed(source = "./assets/OneOfMyEbeddedAssets.png")]
[code].....
Long time flash "dabbler" who has avoided using scripts as long as possible. But now finds himself having to use CS4 and AS3.
I have a situation that would have been easy to handle in older version of Flash or Swish. Previousely if I had an imported FLV or SWF that was 7 seconds long at 20 FPS I would have gone to frame 140 and set a getURL action to redirect to a webpage at the end of the movie.
But with CS4 & AS3, this is not so simple anymore.
I have a button that when pressed successfully invokes the navigateToURL parameter when pressed. But at the same time I am playing an FLV in the background that is 7 seconds long.
What I need to do is have a timed event that at the end of 7 seconds (7000 milliseconds) then invokes the navigateToURL function.
how to accomplish this? I have looked all over and have not seen anything that accomplishes this.
Here is what i have as my script on frame 1 in my actions layer including some timed event scripting
stop();
// We need to import the utils packageimport flash.utils.*;
// Create a new Timer object with a delay of 7000 msvar introTimer:Timer = new Timer(7000);introTimer.addEventListener("timer", timedFunction);
[Code]....
I am building a slide show in Flash 4. I have a series of slides that I want to automatically advance from slide to slide in order after 10 seconds. Is there a slide control in flash for this? Is there an actionscript for this?
View 1 Repliesi have 5 images i wish to use for the slideshow, but i have no idea what to insert in the actionscript so that once the page loaded, the image will change in the order like (1 to 2 to 3 ... ) every 10secs and when i click on the image it will also load the next image without waiting for that 10secs.and which frame do i insert the actionscript code?
View 5 RepliesI have 5 buttons on my scene and each one fades to a different image. I need a timer that will automatically go to the next image after 10 seconds.
View 5 RepliesI am trying to construct a timed loop... so far without success.What I need is a loop where iteration 0 + i + 1 starts a few seconds after iteration 0 + i. I tried putting a timer inside the loop but the loop seems to simple skip the timer instead of executing it sequentially before starting the next iteration. Here is the code snippet:
Code:
var iTimer : Timer;
for( var i:int = 0; i < 2; i++ )
{
trace( i + " i iterations" );
[code]....
The loop does not seem to wait for jLoop() to be executed. It speeds ahead onto the next iteration, instantiating a new timer and thus screwing up the timing of the iterations. I have tried different things like putting break and continue statements in there but to no avail.
I have been trying to come up with a way to have a Timer of which I can modify the Tick time between executions. I have the tick amount as a variable but it seems like the Timer just evaluates that variable once at the start and then ignores it. I've tried adding and removing the EventListeners in between modifying the tick variable but that does not in any way affect the original Timer. For the project I am using this in I cannot simply have a second or third timer to enable with different variables seeing as I would need upwards of 30 of them to do it that way. Can anyone point me in the direction of a way to have a variably timed Timer?
View 5 RepliesHow do I determine if the HttpService instance timed out?
View 3 RepliesI was wondering if it was possible to make a small script in Jquery that would change an image at a certain time. For my site, I want the image for the opening and closing of a facility to change when it opens and closes. Is this possible with Jquery or should I go with something else? Actionscript/Flash? I can't use PHP on the site...
View 3 Repliesmy aim is to catch when the session is invalidated and send message to all destination that the FlexClient subscribed that the client wiht id .... has disconnected. I implemented a service which listens for
[Code]...
Problem is that i want to catch messageClientDestroyed and send to that destination a message that the user has disconnected.But blazeds destroys messageClient when you add a subtopic.So how to understand that if session is invalidated and all messageClient are being destroyed or the user just enter another place and add a subtopic to his consumer. I'am also open for other solutions to implement that mechanism.When user disconnected by session timeout or closed the site browser etc. i wanna catch it and send a message to subscribed destinations.
working on a project which has a number of buttons, when the user rolls over one of these buttons the alpha value decreases to 0 to reveal a image on a lower layer.What I would like to do is gradually restore the alpha back to 100% after the user has moved the cursor off a button. However, I dont want the alpha to restore to 100% straight away, I would like there to be a few second delay before the alpha starts restoring, is this possible, and if so how would I go about doing it
View 2 Repliesi'm using .position with an mp3 sound object to create a timer which i'm using to trigger actions in my main movie:
_level0.theTime =Math.floor(soundTrack.position/1000);
//on enterframe event
if (theTime==10){
[code].....
Im making a little sequencer program as part of a bigger application. The sequencer playhead MC needs to move at accross the stage at a constant speed regardless of the frame rate of application.how to achieve this? My first thought was setInterval, but i have since read that it is not that accurate accross framerate changes either.
View 8 RepliesI'm using this piece of code from a panning source file uploaded to this site while back. I've tried to change the code so that after you press the button the movie will slide to a certain point ( 100,100 ) and then the movie will start its motion again ( nMC.startMotion() ) the problem is it doesn't have time to move to the position before the movieclip startmotion code kicks in.
img.b3.onRelease = function() {
nMC.slideToPoint(100,100); I need a delay here; nMC.startMotion()
}
Using an FLV playback component, I am reading subtitles into a dynamic text box. I'm essentially using the same XML code seen here:URL]..Only problem is, the style tags aren't working for me. They do nothing, and the font style options selected on the stage in the FLA seem to override any style tags.
I'm wondering - does the text box need to be created in Action Script (as opposed to on the stage)? [FYI, I just tried this, this did not seem to work either]. What else could it be?
(Note that I can achieve styling through using CDATA tags, which makes matters more confusing to me. I'd prefer to use the timed text ones if they can work, as they are a little better for readability).
I am trying to create a timed event which will happen every 10ms. I want to achieve a high level of precision (+- 1ms) but I have not found any way to do this. I tried to use the frame rate, but that varied a lot. I also tried to use the timer class, but this did not work very well either (even when I set the timer to go off every millisecond, it went off anywhere between 3 to 40 ms.) Even after using the timer class with getTimer(); I had no guarantee that the event would happen every 10ms.
Code:
import flash.utils.*;
var LastTime:Number = getTimer();
var myTimer:Timer = new Timer(1);
myTimer.addEventListener(TimerEvent.TIMER, TimeCheck);
myTimer.start();
[Code] .....
I want to develop a header splash like you see on many sites now. I have a few ideas. One is a list of images or clips with images embedded. On load teh first image loads up, then after a set time (30 secs), the second image fades in, the first fades out, and etc looping.Any ideas on specific tuts or threads with code examples?
View 1 RepliesI have a main movie with 2 empty movie clips on the stage. They have the instance names clip1 and clip2. I also have 10 swf files named movie1.swf, movie2.swf, movie3.swf, etc. I want to randomly load any 2 of these swf files into the 2 empty movie clips in the main movie. After the 2 swf files have been loaded, I want one of them to last 20 seconds, and then randomly load a new swf file to replace it. And the other one, after 30 seconds, will randomly load a new swf file to replace itself. And this cycle will go on & on...
I have the following actionscript:
[Code]....
Unfortunately, it isn't working. Is there an error with how I typed this? Or do I need to change something so it will work?
I basically want to load 2 swf files into 2 different targets, have one of them last 20 seconds & then randomly load a new swf, and have the other last 30 seconds & then randomly load a new swf. What is the correct actionscript to achieve this?
I just basicly need a small example of script of attachMovie Do something then removeMovie I am trying to understand advanced Fuse [URL] and can make things do stuff now, but not sure how to make the code listen to timed events.
[Code]...
i opened the html file and it said connection timed out?
View 2 Replies